02-02-2010, 07:49 PM | #1 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Has anyone tried these rotors yet?
Has anyone tried these rotors made by Brake Performance and distributed by SupremacyCustoms here at Camaro5. They are dimple drilled and slotted and have a lifetime warranty against warping, that's pretty good! I just have never heard of them and SupremacyCustoms swears by them! The price is better than other close competitors too!
|
02-02-2010, 08:04 PM | #2 |
Booooosted.
|
$$$$?
|
02-02-2010, 08:12 PM | #3 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Get a PM from SupremacyCustoms for a price but I would guess around $600 for a set. I was looking at getting a set of Stillens until I saw these. Just wondering if anyone has tried them! I trust Stillen, they've been around for a long time but I never heard of these.
|
02-03-2010, 09:47 AM | #4 |
Drives: 2010 Camaro 1ss IOM Join Date: May 2009
Location: Williamsport,PA
Posts: 2,246
|
I was also wondering about them!!!!
|
02-03-2010, 11:42 AM | #5 |
High on "The Camaro Life"
Drives: 2010 2SS, IOM, LS3, Vortech, LG cam Join Date: May 2009
Location: Big Sandy, MT & Yuma, AZ
Posts: 1,028
|
I've had a set of their drilled slotted rotors on my Dodge dually for a couple years now and they've been fine. When the dimples disappear, then they are at the minimum thickness, great wear indicator.
__________________
"The democracy will cease to exist when you take away from those who are willing to work and give to those who are not."-Thomas Jefferson------Going Strong at 39,250 miles
|
02-04-2010, 04:08 PM | #6 |
Drives: 2000 Ford Ranger, 2007 Silverado Join Date: Nov 2009
Location: Buffalo, NY
Posts: 34
|
any pics of them on a car?
|
02-04-2010, 05:47 PM | #7 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Sorry Not yet
|
02-04-2010, 06:41 PM | #8 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Thanks for the heads up on the noise from the dimpled! Are the crossed drilled holes chamfered? What is the warranty? Are they made by Granatelli and where are they manufactured? Thanks!
|
02-05-2010, 11:59 AM | #9 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Yes the crossed drilled holes are chamfered
The warranty is lifetime against warpage Granatelli does not make the rotors per-say. We purchase new cores and have the machining done to the customers request - i.e slotted, dippled or drilled or a combo. |
02-05-2010, 01:19 PM | #10 |
Booooosted.
|
Witch are these? And how much for fronts and backs?
|
02-05-2010, 01:28 PM | #11 |
.
Drives: ... Join Date: Apr 2009
Location: Colorado
Posts: 1,380
|
Cheapest I have seen is $425, I just do not know about the stuff I have read about the dimpled making a clicking/scratching noise.
http://rpmspeed.com/index.php?cPath=...f0858d37b42465 |
02-05-2010, 02:42 PM | #12 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Just so there is no confussion We are happy to ship dimpled or drilled - WE DO OFFER THEM both ways
Here is a pic of dimpled The first time you hit the brakes they get shiny like the others |
02-05-2010, 02:59 PM | #13 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Just a few more specs
· Fits 2010-2011 Camaro · Lifetime warranty · Installs easily with simple hand tools · Cooler looking then stock and offers a better cosmetic appearance · Less brake pedal fade after repeated hard stops · 15% decrease in repeatable stopping distance · Increased heat absorption with faster thermal recovery · Maintains OE civility and fully compatible with factory OE ABS · Black Zink Coating – wipes away after 10 miles leaving a beautiful looking rotor with the dimples or crossed drilled holes and slots highlighted in black and a shinny face surface · Drilled rotors have all holes chamfered to ensure long lasting quality · GMS Rotors Feature Scraper Slots – These fully dissipate heat, increase bite and reduce stopping distance. Our slots also help to de-glaze and even out brake pads while throwing dust and debris away from the wheels. It also sheds water under-wet driving conditions. · GMS Rotors Feature either Drilled (Dimpled) Holes or Chamferred Cross Drilled Holes – In both cases this prevents warping and cracking. A major feature of our blind degassing dimpled holes is that it extends the life of the rotors and pads and they dissipate heat with maximum braking performance under all necessary driving conditions. This allows us to offer a LIFETIME WARRANTY against warping and cracking. · Balanced & Vented – GMS Rotors are machine balanced, vented for cooling, X-Ray Inspected and manufactured to meet QS and ISO quality system standards. · Manufactured from premium quality solid casting, TUV approved steel. · Ultra smooth rotor surface reduces brake noise and extends pad life and are vented for cooling. · Meets and exceeds federal safety standards required for new vehicles · Guaranteed vibration-free performance Fronts Outer Dia......................................355.4mm Height........................................... 49.7mm Nom Thick................................... 31.9mm Min Thick..................................... 30.0mm Hub Reg...................................... 67.4mm Bolt Size..................................... 16.2mm Bolt Circle.................................. 5-Lug x 120mm Weight........................................ 25.5 LBS Rears Outer Dia......................................365.0mm Height........................................... 47.6mm Nom Thick................................... 28.0mm Min Thick..................................... 26.0mm Hub Reg...................................... 67.4mm Bolt Size..................................... 16.5mm Bolt Circle.................................. 5-Lug x 120mm Weight....................................... 24 LBS Thank You |
02-05-2010, 03:20 PM | #14 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Thanks Granatelli for all the excellent info! Greatly appreciated!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brembo 2SS Brake rotors Front and Rear Complete with Pads | 55Designs | Suspension / Chassis / Brakes | 4 | 06-07-2011 02:58 PM |
DBA Brake Rotors, Hawk Brake Pads, and Motul Fluids! | AJ@ECSMotorsports | Suspension / Chassis / Brakes | 49 | 11-13-2010 03:57 PM |
2-piece rotors for all 4 corners group buy | Doc | Suspension / Chassis / Brakes | 96 | 12-31-2009 03:18 PM |
Warping brake rotors | Angrybird 12 | Suspension / Brakes / Chassis | 13 | 12-18-2009 02:45 PM |
2010 Camaro SS Brembo Heavy Duty Cross Drilled Brake Rotors In Stock Ready To Ship | Tim@Lingenfelter | Suspension / Chassis / Brakes | 4 | 12-07-2009 08:26 PM |