08-06-2014, 09:47 AM | #1 |
Drives: 2010 2SS/RS Join Date: Oct 2013
Location: Demotte IN
Posts: 55
|
FAST 102 question
Hey guys just received my FAST 102 "used" intake i have a question about some of the hardware that came with it as i think im missing a bolt or 2 in the picture there is 2 bolts holes on either side of the TB that are short little bolt holes and go no where on the intake but straight through obviously i don't have the stock intake off so idk if there is holes they fit into or if they just aren't used for my application either way the one u can see in the picture is right behind the throttle body those two anyone know if i need to locate some bolts for these ? Any help is appreciated .
|
08-06-2014, 01:13 PM | #2 |
I am not "Fast & Furious"
Drives: 2010 Camaro LSX454 1LE Join Date: Nov 2008
Location: Greeley Colorado
Posts: 1,040
|
Those are just the front two bolts that hold the top grey shell lid to the base of the intake manifold. You need the bolt pictured (2) and the small nuts that go in the base (2).
__________________
The day I take a bend too fast
Judgement that could be my last I'll be wiped right off the slate Don't wait up 'cause I'll be late, I'll be late |
08-06-2014, 07:44 PM | #3 |
Drives: 2010 2SS/RS Join Date: Oct 2013
Location: Demotte IN
Posts: 55
|
Ahh ok i think the small nut that goes in the base must be missing because it threads into nothing at the moment . Thats what confused me . Ok thanks !
|
08-06-2014, 09:28 PM | #4 |
Drives: 2010 M6 2SS Join Date: Mar 2011
Location: South Windsor, CT
Posts: 1,202
|
Without those, you'll probably have vacuum leaks and it will be very hard to tune it to run right.
__________________
2010 Camaro SS M6. Heads/Cam/Intake/Headers/Exhaust/Suspension |
08-10-2014, 06:02 AM | #5 |
Drives: 2010 2SS/RS Join Date: Oct 2013
Location: Demotte IN
Posts: 55
|
Yea im gonna find a set if bolts and the right size nut that fits in the bottom and do it right . Didn't notice the nut shape on the bottom of intake until it was mentioned .
|
|
|
|
|