FAST 102 question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Deuce SS/RS · 08-06-2014, 09:47 AM

Hey guys just received my FAST 102 "used" intake i have a question about some of the hardware that came with it as i think im missing a bolt or 2 in the picture there is 2 bolts holes on either side of the TB that are short little bolt holes and go no where on the intake but straight through obviously i don't have the stock intake off so idk if there is holes they fit into or if they just aren't used for my application either way the one u can see in the picture is right behind the throttle body those two anyone know if i need to locate some bolts for these ? Any help is appreciated .

AG454 · 08-06-2014, 01:13 PM

Those are just the front two bolts that hold the top grey shell lid to the base of the intake manifold. You need the bolt pictured (2) and the small nuts that go in the base (2).

Deuce SS/RS · 08-06-2014, 07:44 PM

Ahh ok i think the small nut that goes in the base must be missing because it threads into nothing at the moment . Thats what confused me . Ok thanks !

MikeOD · 08-06-2014, 09:28 PM

Without those, you'll probably have vacuum leaks and it will be very hard to tune it to run right.

Deuce SS/RS · 08-10-2014, 06:02 AM

Yea im gonna find a set if bolts and the right size nut that fits in the bottom and do it right . Didn't notice the nut shape on the bottom of intake until it was mentioned .

08-06-2014, 09:47 AM	#1
Deuce SS/RS Drives: 2010 2SS/RS Join Date: Oct 2013 Location: Demotte IN Posts: 55	FAST 102 question Hey guys just received my FAST 102 "used" intake i have a question about some of the hardware that came with it as i think im missing a bolt or 2 in the picture there is 2 bolts holes on either side of the TB that are short little bolt holes and go no where on the intake but straight through obviously i don't have the stock intake off so idk if there is holes they fit into or if they just aren't used for my application either way the one u can see in the picture is right behind the throttle body those two anyone know if i need to locate some bolts for these ? Any help is appreciated . Attached Images

08-06-2014, 01:13 PM	#2
AG454 I am not "Fast & Furious" Drives: 2010 Camaro LSX454 1LE Join Date: Nov 2008 Location: Greeley Colorado Posts: 1,040 View My Garage	Those are just the front two bolts that hold the top grey shell lid to the base of the intake manifold. You need the bolt pictured (2) and the small nuts that go in the base (2). __________________ The day I take a bend too fast Judgement that could be my last I'll be wiped right off the slate Don't wait up 'cause I'll be late, I'll be late

08-06-2014, 09:28 PM	#4
MikeOD Drives: 2010 M6 2SS Join Date: Mar 2011 Location: South Windsor, CT Posts: 1,202	Without those, you'll probably have vacuum leaks and it will be very hard to tune it to run right. __________________ 2010 Camaro SS M6. Heads/Cam/Intake/Headers/Exhaust/Suspension

08-06-2014, 07:44 PM	#3
Deuce SS/RS Drives: 2010 2SS/RS Join Date: Oct 2013 Location: Demotte IN Posts: 55	Ahh ok i think the small nut that goes in the base must be missing because it threads into nothing at the moment . Thats what confused me . Ok thanks !

08-10-2014, 06:02 AM	#5
Deuce SS/RS Drives: 2010 2SS/RS Join Date: Oct 2013 Location: Demotte IN Posts: 55	Yea im gonna find a set if bolts and the right size nut that fits in the bottom and do it right . Didn't notice the nut shape on the bottom of intake until it was mentioned .