09-01-2015, 09:12 PM | #1 |
Drives: 2010 RS , SS , supercharged , Join Date: Aug 2015
Location: Strathroy
Posts: 171
|
oil catch can
I am running a E-force on my 2010 , and sometimes when I lean on it hard I get a burning oil smell after , at a light , etc . should I be running a oil catch can ? there are no leaks , etc , so I think it is going throw the super charger and out the exhaust ? causing the smell ? any idea's ? thanks
|
09-01-2015, 10:08 PM | #2 |
10.11 @ 136.32
Drives: Black & Yellow 2SS/RS LPE LS7 427 Join Date: Mar 2010
Location: Redcliff, Alberta
Posts: 957
|
A catch can is always a good idea with boost.
__________________
|
09-02-2015, 06:51 AM | #3 |
Drives: 2010 RS , SS , supercharged , Join Date: Aug 2015
Location: Strathroy
Posts: 171
|
your right , who makes one that fits the car proper ?
|
09-02-2015, 07:40 AM | #4 |
|
|
09-02-2015, 08:03 AM | #5 |
Svt lol
Drives: 2011 ss inferno orange blown Join Date: Jan 2012
Location: Topeka
Posts: 2,312
|
I would use Mighty Mouse they have three different types to choose from. I run their draft can easy and clean install, adapter on the oil fill cap to can and then a line to the supercharger. Makes for a super easy and clean install.
__________________
plasti dip is not a mod.......and a cold air intake doesn't make you fast!
|
09-02-2015, 09:45 AM | #6 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
I have an Elite catch can. Shown below is where I mounted it.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
09-03-2015, 11:18 AM | #7 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
+1 for Elite. We've literally sold and installed hundreds of them and their quality is second to none.
Kind regards, -Adrian 888.308.6007 |
09-03-2015, 11:33 AM | #8 |
Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014
Location: AL
Posts: 610
|
If you end up going with a vented catch can, I wouldn't expect that oil smell to go away...
__________________
'14 Saleen 620 White Label #14-011
ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708 |
09-03-2015, 11:38 AM | #9 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,220
|
We carry Moroso catch cans that are direct fit for the camaro but with the Eforce you may have to fabricate a bracket out of the 2 that come with it.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
09-03-2015, 12:44 PM | #10 | |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,548
|
Quote:
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
|
09-03-2015, 02:06 PM | #11 |
Drives: 5th Gen Join Date: Feb 2010
Location: Chesterfield
Posts: 385
|
Check out the Mighty Mouse cans and email Dave if your unsure which one is best for you...he'll point you in the right direction
|
09-03-2015, 04:12 PM | #12 |
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
ELITE E2 single exit port can with black AN fittings and braided lines.
|
|
|
Thread Tools | |
|
|