2015 1LE vs 2013 Bolt on SS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

damian559 · 11-03-2014, 02:13 PM

I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

MRREVINTO7 · 11-03-2014, 02:26 PM

i have a 1LE also ..the roll is in your best interest due to the trans ratios. even though you have 391 rear ratio .1le has 2.66 1st
1.78 2nd 1.30 3rd vs the ss gearing ...3.01 1st 2.07 2nd 1.43 3rd ...

MRREVINTO7 · 11-03-2014, 02:37 PM

my friend has a 2010 with all the same mods as me in my 1LE except he has weld wheels and we both have 3.91s our cams are almost identicle except i have 113 lobe he has 115...he makes 457rwhp400tq same specs..
vs my 472-424... when we go from dig I'm trailing a full car ..when we roll 50 or below its nose to nose he edges me sometimes 1/8 car his car is 200lbs less and everytime we ran i had a regular wheel and 125b passenger ...but if we go from 60 i can pull away ..good runs though ..have fun and be safe ..we did this on old air strip 1.5 miles long

TXLS3 · 11-19-2014, 04:56 PM

No videos?

45thAnniversary2SS · 11-19-2014, 05:01 PM

Quote:

Originally Posted by damian559

I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

Well shorties suck so basically same power. Why is that surprising?

rontammy0 · 11-19-2014, 05:04 PM

We need video of every race posted......shorties need hi flow cats to work well.

45thAnniversary2SS · 11-19-2014, 05:07 PM

If anyone around here wants to try same thing against long tubes let me know. I'm your huckleberry.

rontammy0 · 11-19-2014, 05:11 PM

Quote:

Originally Posted by 45thAnniversary2SS

If anyone around here wants to try same thing against long tubes let me know. I'm your huckleberry.

If camarofest is in North Carolina this year I'm going to really try to make it down.....then we can do the shorty with hi fllows vs ...long tubers. Even if you beat me your still going to buy me a shitty American beer for my troubles.

45thAnniversary2SS · 11-19-2014, 07:41 PM

Quote:

Originally Posted by rontammy0

If camarofest is in North Carolina this year I'm going to really try to make it down.....then we can do the shorty with hi fllows vs ...long tubers. Even if you beat me your still going to buy me a shitty American beer for my troubles.

deal

rontammy0 · 11-20-2014, 06:59 AM

Quote:

Originally Posted by 45thAnniversary2SS

deal

damian559 · 11-22-2014, 02:46 PM

Quote:

Originally Posted by TXLS3

No videos?

It's bad quality and hard to see.

Snidely Whiplash · 11-24-2014, 01:47 AM

Quote:

Originally Posted by MRREVINTO7

my friend has a 2010 with all the same mods as me in my 1LE except he has weld wheels and we both have 3.91s our cams are almost identicle except i have 113 lobe he has 115...he makes 457rwhp400tq same specs..
vs my 472-424... when we go from dig I'm trailing a full car ..when we roll 50 or below its nose to nose he edges me sometimes 1/8 car his car is 200lbs less and everytime we ran i had a regular wheel and 125b passenger ...but if we go from 60 i can pull away ..good runs though ..have fun and be safe ..we did this on old air strip 1.5 miles long

Cams are NEVER almost identical as the ramp profile has no spec. Were they both installed straight up or advanced/retarded? Are the rocker arms the same? There are a host of things that make every cam unique. That said, I've never run any camshaft that was not custom ground as nobody wants to use their car in the same manner, nor does that car have the same mods to perform your unique tasks.

Taco Time · 11-24-2014, 08:39 AM

Quote:

Originally Posted by damian559

I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

Alright, somebody educate me here. I was to understand that the 1LE is an SS with track add-ons. It has 3.91 gears? (just trying to understand what makes it faster in a straight line than an SS.) thanks.

MightymouseSS · 11-25-2014, 04:32 AM

Quote:

Originally Posted by Taco Time

Alright, somebody educate me here. I was to understand that the 1LE is an SS with track add-ons. It has 3.91 gears? (just trying to understand what makes it faster in a straight line than an SS.) thanks.

Technically the 1le is only a tenth quicker on the 1/4 mile than the SS from what I seen on car and driver and motortrend. I'd think mainly due to the better tires and gears.

11-03-2014, 02:13 PM	#1
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	2015 1LE vs 2013 Bolt on SS I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me. __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

11-19-2014, 04:56 PM	#4
TXLS3 Drives: 11' 2ss/rs ls3 Join Date: Feb 2014 Location: houston Posts: 421 View My Garage	No videos? __________________ LS3.. 1le 3.91 gears \| Gforce tuned 400hp 400tq \| cai inc \| SP 1 7/8" headers \| no cats \| x pipe \| dynomax bullet mufflers \| BMR 1.4" suspension \|

11-19-2014, 05:07 PM	#7
45thAnniversary2SS Drives: 2012 45th Anniversary 2SS LS3 Join Date: Feb 2012 Location: Charlotte, NC Posts: 2,812 View My Garage	If anyone around here wants to try same thing against long tubes let me know. I'm your huckleberry. __________________

11-03-2014, 02:26 PM	#2
MRREVINTO7 Drives: 14 1Le --14 chevy ss sedan 07shelby Join Date: Sep 2014 Location: ny Posts: 357	i have a 1LE also ..the roll is in your best interest due to the trans ratios. even though you have 391 rear ratio .1le has 2.66 1st 1.78 2nd 1.30 3rd vs the ss gearing ...3.01 1st 2.07 2nd 1.43 3rd ...

11-03-2014, 02:37 PM	#3
MRREVINTO7 Drives: 14 1Le --14 chevy ss sedan 07shelby Join Date: Sep 2014 Location: ny Posts: 357	my friend has a 2010 with all the same mods as me in my 1LE except he has weld wheels and we both have 3.91s our cams are almost identicle except i have 113 lobe he has 115...he makes 457rwhp400tq same specs.. vs my 472-424... when we go from dig I'm trailing a full car ..when we roll 50 or below its nose to nose he edges me sometimes 1/8 car his car is 200lbs less and everytime we ran i had a regular wheel and 125b passenger ...but if we go from 60 i can pull away ..good runs though ..have fun and be safe ..we did this on old air strip 1.5 miles long

11-19-2014, 05:04 PM	#6
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	We need video of every race posted......shorties need hi flow cats to work well.