03-17-2013, 05:29 PM | #1 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Decorative Strut Tower Brace Bolts
I'm look for some decorative strut tower brace bolts. I have some OEM painted ones from Lupe (overhaulengines) but the paint started flaking off after tightening them after I had to do some brake line work. I have seen some other posts with guys looking for these same type of bolts, but I never saw any answers.
I am looking for some suggestions on options to get a nice looking set of of M8 x 1.25 x 30mm bolts. Anyone changed theirs out? Got any ideas? Thanks in advance! |
03-17-2013, 05:37 PM | #2 |
Drives: 2012 2LT Black (Vengeance) Join Date: Mar 2010
Location: pa
Posts: 637
|
Black bolts?
I've been thinking about the same thing... found these on eBay...
http://www.ebay.com/itm/GM-METRIC-BO...404#vi-content Check it out... if you think you might go for it, I'd split the cost with you for 6, since that's all either of us needs. |
03-17-2013, 05:43 PM | #3 | |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Quote:
|
|
03-17-2013, 06:10 PM | #4 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
I wouldn't call these decorative; but I used black cap screws when I painted the end caps black. I may go also go with black washers as well.
|
03-17-2013, 06:45 PM | #5 | |
Quote:
|
||
03-17-2013, 06:52 PM | #6 |
Drives: 2SS/RS L99 BLACK Join Date: Apr 2010
Location: Franklin , MA
Posts: 6,696
|
Have you thought about using something like Hot Toppers or Snap Caps?
|
03-17-2013, 06:54 PM | #7 |
owner/operator VIN 1760
|
Try "dressupbolts.com"
__________________
"With Great POWER comes Great Responsibility" - Stan Lee |
03-17-2013, 07:51 PM | #8 | |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
I'm going to check out my local HD. I checked at Lowe's and they didn't have anything that fit.
Quote:
http://ohio-speed.com/p-2570-2010-20...s-6-black.aspx They seem to be like Hot Toppers. I might try these out. They don't have the size listed that I am looking for. I guess I could send them an email. They do have replacement bolts for the rest of the engine bay fender bolts. I think I am going to try the bolt covers from Ohio Speed if I cannot find the bolts at Home Depot. |
|
03-17-2013, 07:59 PM | #9 | |
Drives: 2SS/RS L99 BLACK Join Date: Apr 2010
Location: Franklin , MA
Posts: 6,696
|
Quote:
|
|
03-17-2013, 08:58 PM | #10 |
Deep Sea
Drives: 2012 Camaro ZL1 Join Date: Sep 2011
Location: Palm Beach Gardens, Fl.
Posts: 969
|
Let me know what you find, I am right behind you.
|
03-17-2013, 09:16 PM | #11 |
Home Depot will have them in the box's that have all the SS metric and SAE.
|
|
03-17-2013, 09:22 PM | #12 |
Drives: '12 SIM ZL1, 1 of 49 Join Date: Sep 2011
Location: Eastern TN
Posts: 459
|
Check out this thread - post #97. http://www.camaro5.com/forums/showth...=228644&page=4 These are SS allen head bolts with custom SS tapered washers.
__________________
Under Hood - Painted strut bar ends w/custom Polished Stainless mounting hardware, E2 CC, RotoFab CAI, ZL1 underhood decal, Amsoil oil, Black billet strut covers, Metco pulleys, intercooler reservoir, JRE 75 RWHP package.
Chassis - Hawk ceramic brake pads, ZL1 wheel decals, Amsoil fluids Interior - A pillar gauge pod w/Aeroforce Interceptor gauges, Polished ZL1 speaker rings, ZL1 mats and console lid, Custom GPS mount Exterior - 3M clear bra, LED driving lights, PIAA Plasma Ion yellow fog lights, Window tint, CF bowties, Technostalgia sequential tail lights |
03-17-2013, 10:07 PM | #13 |
Drives: 2012 VR ZL1 #1817 Join Date: Dec 2011
Location: Danville, IN
Posts: 36
|
Matt, I used APR 12 point stainless on my SS. I believe I am going to do the same when I paint the strut brace.
ScoMac |
03-17-2013, 10:10 PM | #14 |
I went with socket head SS bolts, I got mine from Marshalls but HD and Lowes usually have them.
|
|
|
|
|
|