02-11-2010, 01:06 PM | #1 |
Drives: 5th Gen Rental Join Date: Aug 2007
Location: New England
Posts: 1,901
|
Status of Pedders Sway Bars
Hey guys,
Just thought I would give you a heads up on the Camaro Sway Bars. First the issue: the plant that makes the bars was in bad need of updating, plus they could no longer handle the orders. So they gutted the equipment, and redid all of it. The seriously huge piece of equipment they did was a massive military grade shot peening device that can do multiple units at one time. They also redesigned all the the bending and mandrel processes as well. Now: Pete just got back from Au and toured the new plant. I chatted with him yesterday. the plant is ramping up rapidly. Enhancements to our bars: I believe we have increased the front adjustments to 4 positions. All bars will be shot peened to a high military tolerance by the best equipment made. Then they will be bent, zinc plated, powder coated, then clear coated. so the protection and look of the bar will be outstanding. One of the areas of concern on the sway bars are the stops that limit the side to side movement. Most sway bar manufacturers weld these stops to the bars. Welding a high carbon tensile strength steel bar creates unneccessary stresses and reduces reliability, especially on hollow bars. We have a totally different process that does not involve steel welding. We are still working on several different processes that will all work. So our bars may come in with different methods of attaching the stops for a while, so the new plant can evaluate the best manufacturing processes. There is one more enhancement that has not been released yet for discussion. Delivery: We will have 20 sets of Camaro bars in our warehouse no later than March 10. However, since they do not have Camaros in Au and the bars are being made with an entirely new and more accurate and better process, we will take one of the bar sets and do a USA fitment test. We always have done this. So if it passes the Pete Basica fitment test, then the other 19 sets will be shipped out ASAP, and then we will be able to accurately predict orders, and order accordingly. So by the end of March, our sway bar delivery issues will be over with. We very much appreciate the patience of our Camaro customers. It has been ridiculus on how much time this has taken. But at least we can see light at the end of the tunnel thanks, Mike dms |
02-11-2010, 02:17 PM | #2 |
Tampa Gulf Coast Family
Drives: 1977 Z28, 2SSRS 2010 M6 Join Date: Sep 2009
Location: Dunedin FL
Posts: 810
|
Yeah I ordered mine in early December as well as bushing set and still waiting for everything or anything. About to jump ship to another competitor.
|
02-11-2010, 06:15 PM | #3 |
Drives: Z06, 69 Camaro Join Date: Oct 2009
Location: Orange County
Posts: 197
|
Great to hear about the new plant and improvements, but that is about 75 days longer than I was quoted when I ordered my kit. Have you driven a Camaro hard in a canyon or on the track with C/O's and stock sway bars? Guess I won't either for another month or two...
|
02-12-2010, 02:12 AM | #4 | |
Drives: 5th Gen Rental Join Date: Aug 2007
Location: New England
Posts: 1,901
|
Quote:
mike dms |
|
02-12-2010, 01:45 PM | #5 |
Drives: Z06, 69 Camaro Join Date: Oct 2009
Location: Orange County
Posts: 197
|
|
02-13-2010, 11:29 AM | #6 |
Drives: 5th Gen Rental Join Date: Aug 2007
Location: New England
Posts: 1,901
|
All pms sent to me I have sent to the office for info except one that did not give me any data on the order, which is a must
thanks mike dms |
02-13-2010, 08:39 PM | #7 |
Tampa Gulf Coast Family
Drives: 1977 Z28, 2SSRS 2010 M6 Join Date: Sep 2009
Location: Dunedin FL
Posts: 810
|
Where is the office, Australia? Oh it probably is.
|
02-14-2010, 12:58 PM | #8 |
Account Suspended
|
Had mine installed yesterday at Haddad Motorsports. Just don't go too stiff on the settings. It'll hit a bracket on inner wheel well and may have to cut a little and hammer and paint and presto. So we went to a "medium" setting and no hitting of the bracket. But this monster handles....OMG OMG OMG!!!
|
02-14-2010, 03:56 PM | #9 | |
Drives: 2010 SS RS Join Date: Apr 2009
Location: Honolulu, Hawaii
Posts: 930
|
Quote:
Thx |
|
02-14-2010, 05:40 PM | #10 |
Account Suspended
|
Call Mike at Haddad Motorsports at 310 412-8032 for the details of the settings. I should've taken pictures of the bracket.
|
02-15-2010, 10:16 AM | #11 |
Dances With Mustangs
|
Mike does great work; he installed and setup mine. Car is properly lowered and handles like a dream now.
__________________
Blue Angel is here!! 1SS/RS LS3 M6 IBM |
02-15-2010, 01:21 PM | #12 |
Account Suspended
|
Yea, Mike is awesome. After the sway bar install, we ripped down E Florance for a test drive. That man can drive.
|
02-16-2010, 01:42 PM | #13 |
Drives: Camaro Join Date: Jun 2009
Location: Inglewood
Posts: 532
|
All issues have been resolved, the issues we had were setup issues, everything we did on fixxer's car was close to the edge. when running the stiffest setting on the front sway bar, on an agressively lowered car you simply have to adjust the adjustable endlinks out about a 1/2" in order to clear a factory tab. You do have the option to grind or hammer the tab, as it serves no function.
These are hands down the best bars on the market and are worth waiting for. No one has put more love into there bars than pedders has. All the way from development down to the manufacturing procedure. Its a top notch operation. BTW while most companies were getting ready for the 2010 camaro's we already had over 1 year of development through the g8's (which is 95% identical). No I am not biased. I do not work for pedders, I merely sell there stuff because its the best stuff that I can get my hands on for my clients. Thanks Mike Haddad |
02-17-2010, 12:35 PM | #14 |
Shop Owner
Drives: 1 ton silverado Join Date: Jan 2009
Location: Medina Oh
Posts: 154
|
Ditto Mikes response.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hotchkis: Tuned Suspension Setups | Springs | Chassis Brace | Sway Bars | FREE S&H | AJ@ECSMotorsports | Suspension / Chassis / Brakes | 80 | 11-17-2010 02:28 PM |
MTI, Pfadt, Hotchkis or Pedders sway bars | flht99b | Suspension / Brakes / Chassis | 6 | 01-21-2010 01:25 PM |
Pfadt Springs and Sway Bars In Stock! *Package Deal*! | PfadtRacing | Suspension / Chassis / Brakes | 0 | 10-14-2009 05:41 PM |