07-01-2014, 04:42 PM | #1 |
Drives: 2013 ZL1 CRT 6spd Join Date: Apr 2012
Location: Louisiana
Posts: 107
|
Badges
Would like to get some opinions, I want to add some Badges (ZL1 or supercharged) to the fenders under the CAMARO badges, any ideas? If anyone has done this please post pics.
|
07-01-2014, 05:34 PM | #2 |
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Might look okay to remove the Camaro and take the hood emblems off. Then put those emblems on the fender. Seems kind of redundant to have hood emblems and fender emblems that say ZL1. You could leave the hood emblem and replace the Camaro with Supercharged. That might not look too bad.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
07-01-2014, 06:45 PM | #3 |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
I agree - replace Camaro with Supercharger. Seen others add it underneath the Camaro emblem or replace with ZL1 and just didn't fit in to me. I changed mine out to 69 emblem.
69 Emblem Black ZL1 Sent from my iPhone using Tapatalk
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
07-01-2014, 06:46 PM | #4 |
Drives: 2018 camaro zl1 Join Date: Apr 2012
Location: pa
Posts: 45
|
I thought these looked good. They are on Ebay for 60.00. They match the original Camaro emblems.
|
07-01-2014, 07:02 PM | #5 | |
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Quote:
If you replaced the Camaro with those I think it would look good.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
|
07-01-2014, 07:02 PM | #6 |
Drives: 2013 ZL1 CRT 6spd Join Date: Apr 2012
Location: Louisiana
Posts: 107
|
Thanks for the input, I'm liking the supercharged emblems.
|
07-01-2014, 07:07 PM | #7 | |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Quote:
Looks good to me. Matches the stock Camaro font. Nice Sent from my iPhone using Tapatalk
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
|
07-01-2014, 07:07 PM | #8 | |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Quote:
Black emblems were from www.emblempros.com Sent from my iPhone using Tapatalk
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
|
07-01-2014, 10:32 PM | #9 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
Here's mine.
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
|
|
|
|