Who is up for an install day for the dash ABL? (Updated)

[2010SSRSM6]

Originally Posted by Chito

Thanks, hopefully it can be done. I rather go saturday. but whatever works especially if i'm getting the footwell lights as well. btw I'm not sure if you got my vin#. I didn't see the update. let me know if you still need it. thanks.

Got it. Thanks!

Originally Posted by Synerbee

Count me in for green dash. Ill get my vin number when I get home.

I would like to have the doors extended. Does that mean I would come with my panels already taken off?

Synerbee (Green) 2010 1LT "factory ABL" VIN 9197536 (Dash Only)

Do your doors already have green ABL? I've got you on the list for Dash only, but if you don't have green doors, you may not want to have 2 colors. If it would be 2 different colors, I will put you on the dash and door list.

You do not have to come with your door panels already off. That will all happen here, unless you want to take them off prior to getting here.

Originally Posted by GnarlyBro

Just an Update for Post 1

Year: 2010
Model: 2SS/RS
VIN: 9210708
Color for your ABL: Blue

Thanks!

Updated the first post. Thanks!

Originally Posted by TaylorRyanSS

You have me down for orange, I thought the lights in the IO interior were red?

Factory lights are Orange, but he has a pic up of what it looks like with Red LED's. I think it is on pg 2.

[2010SSRSM6]

For everyone wanting to get footwell lighting done, here is the scoop:

The way that 2SSRS does the footwell lighting is very similar to the dash ABL. He installs a light rope and adds 2 LED's. I'm not sure how bright this is, but I wouldn't imagine that it is very bright. This will also require the harness listed in the first post.

If you want to get the stuff from AAC to do the footwell lighting prior to the event, he can install that for you.

There is also the cup holder option. This requires 2 LED's and there are two different ways that this can be installed. One requires drilling, one does not.

Now you have your options. Keep in mind, there are a lot of people currently on the list and I will update it again after the deposits are finalized.

Speaking of deposits, the amount of the deposit will be the cost of the LED's.
If you are doing:
Dash only - your deposit will be $60
Dash & Doors - your deposit will be $100
Dash & Cup holder - your deposit will be $100
Dash & Footwell - $140

I will need everyone's email address so I can forward it to 2SSRS so he can send you a paypal request for your deposit. Please PM me those as soon as possible so I can compile the list and send it out. DO NOT send your e-mail address directly to 2SSRS, this will only create confusion, and could cause you to be removed from the install list do to said confusion.

Again, please double check the first post and let me know which way you are going. (adding cupholder, footwell, etc.) so I can get the right info out and this goes smoothly.

Thanks!

[2SSRS@Gen5diy]

Originally Posted by TaylorRyanSS

You have me down for orange, I thought the lights in the IO interior were red?

They are but we all call it IOM. LOL

Originally Posted by 2010SSRSM6

For everyone wanting to get footwell lighting done, here is the scoop:

The way that 2SSRS does the footwell lighting is very similar to the dash ABL. He installs a light rope and adds 2 LED's. I'm not sure how bright this is, but I wouldn't imagine that it is very bright. This will also require the harness listed in the first post.

If you want to get the stuff from AAC to do the footwell lighting prior to the event, he can install that for you.

There is also the cup holder option. This requires 2 LED's and there are two different ways that this can be installed. One requires drilling, one does not.

Now you have your options. Keep in mind, there are a lot of people currently on the list and I will update it again after the deposits are finalized.

Speaking of deposits, the amount of the deposit will be the cost of the LED's.
If you are doing:
Dash only - your deposit will be $60
Dash & Doors - your deposit will be $100
Dash & Cup holder - your deposit will be $100
Dash & Footwell - $140

I will need everyone's email address so I can forward it to 2SSRS so he can send you a paypal request for your deposit. Please PM me those as soon as possible so I can compile the list and send it out. DO NOT send your e-mail address directly to 2SSRS, this will only create confusion, and could cause you to be removed from the install list do to said confusion.

Again, please double check the first post and let me know which way you are going. (adding cupholder, footwell, etc.) so I can get the right info out and this goes smoothly.

Thanks!

Thanks 2010SSRSM6 for your help, next week i will get all set up.

[2010SSRSM6]

Originally Posted by 2SSRS

They are but we all call it IOM. LOL

My bad Taylor, I thought they were Orange. 2SSRS knows what I meant, I'll leave the list alone.



Thanks 2010SSRSM6 for your help, next week i will get all set up.

Not a problem. Thanks for correcting my blunder.

[lakers171]

how much is the footwell and/or cup holder lights? i know you just put deposit but i wanted to know how much is it just alone that way i have an idea how broke i am going to be lol

[TaylorRyanSS]

Originally Posted by 2010SSRSM6

Not a problem. Thanks for correcting my blunder.

I just wanted to make sure so my door lights match the dash lol

[MARINE1991]

WoW this is getting huge... There willl be more camaros at your house then at the cruise... Can not wait to get this done..

[2010SSRSM6]

Originally Posted by lakers171

how much is the footwell and/or cup holder lights? i know you just put deposit but i wanted to know how much is it just alone that way i have an idea how broke i am going to be lol

For the footwell lighting, you are going to have to add the cost of the harness (if I remember correctly) and 4 LED's @ $20 each. I think the install cost was $30, again, don't quote me on that. Cup holder lights are 2 extra LED's, so $40, install depends on which way you do it. Either drilling two holes or running the lights under the lip. Can't remember the price on that. 2SSRS will be able to answer the install prices so I don't over/under charge you guys. I think it was $30 for the cup holder, but I've been up for two days and could be way off.

Originally Posted by TaylorRyanSS

I just wanted to make sure so my door lights match the dash lol

You and me both.

Originally Posted by MARINE1991

WoW this is getting huge... There willl be more camaros at your house then at the cruise... Can not wait to get this done..

A guy that lives 5 houses down has 4 Mustangs. This is going to be fun.

[2010SSRSM6]

Just so nobody has to go back to the first post to see the prices:


Dash only:

3 LED's @ $20 each = $60
1 light pipe @ $25
1 Splitter @ $10
Parts total is $95, Install price is $60 for a grand total of $155.

This will get you the same look that Mindz has in the pictures in post #15.


Dash and door color change:

5 LED's @ $20 each = $100
1 light pipe @ $25
1 Splitter @ $10 ****
Parts total is $135, Install price is $60 for a grand total of $195.

****If you need a plug and play harnesses that is $50 but you don't need the splitter, so add $40 to the total.


Adding ABL to a car that doesn't have it:

5 LED's @ $20 each = $100
1 light pipe @ $25
1 Splitter @ $10 (I would assume you need the harness, but not sure)
Parts total is $135, Install price is $60 for a grand total of $195.


Cup holder lighting:

2 LED's @ $20 ea = $40
Install $ ***must be verified by 2SSRS

Footwell Lighting:

4 LED's @ $20 each = $80
Light Pipe
Plug and Play harness is required
Install $ ***must be verified by 2SSRS

[reflexx]

count me in guys..

2LT/RS- dash only (blue)

Cupholder (blue)

VIN- 9139151

[Chito]

Please count me in for the footwell and cup holder light as well in blue. I'll be sending you my email address.

[Chito]

question? do we have to get the footwell and cup holder lights from aac or can 2ssrs provide those?

[2010SSRSM6]

Originally Posted by Chito

question? do we have to get the footwell and cup holder lights from aac or can 2ssrs provide those?

If you want to use AAC's style of footwell lighting, then get it from them. If you want footwell lighting that is just like the ABL on the dash and doors, get it from 2SSRS. He uses the same light pipe and LED's as the dash.

Cup holder lighting is available from 2SSRS. I don't think AAC offers anything like that, but I'm not sure. It is just 2 LED's that he wires up.

[2010SSRSM6]

Originally Posted by reflexx

count me in guys..

2LT/RS- dash only (blue)

Cupholder (blue)

VIN- 9139151

Added you to the list and sent you a PM.