Hey GM, where is the 1LE gear?!

[Abomb1223]

Do those gears work for the v6? Sorry I'm not that familiar with gears . .

[mattsfirstSS]

Originally Posted by Abomb1223

Do those gears work for the v6? Sorry I'm not that familiar with gears . .

You can of course swap gears in your V6 however the rear end in the SS is different so not those particular gears from a 1LE, you can make them work in a V6 but you'll need to do more than just swap ring and pinion, i.e. half shafts, diff etc. I am not sure what gears are available for your V6 but Im sure google would be your friend

Edit: So far I have found that 3.55 is available for a V6...

Edit again: it is my opinion and I believe shared by many that a gear swap is one of the top 3 mods you can do to your car if you are a power junkie. it changes the feel drastically and gets more power going forward for cheaper than a lot of other things. Other nice mods (at least for V8) is long tube headers w/hi flow cats, a tune, and drag radials.

[mattsfirstSS]

Originally Posted by Sandor

Yes, a recal will be required to keep the speedo accurate. The Camaro street-level performance parts will largely be released in Q1 2013. In the case of 1LE parts, the 3.91 ring & pinion and the 1LE suspension kit will both be available. When installed by your dealer they will carry a 3/36 warranty and will not void your vehicle warranty. From the ZL1, the short-throw shifter will also be available and will also have the warranty. For hardcore racing use the ZL1 driveline, including the half-shafts and differential, is also available as an off-road use only part.

Head to chevroletperformance.com to download the 2013 performance parts catalog. www.chevroletperformance.com

Visit the Chevrolet Performance social media site to see updates. www.theblock.com

Hope this helps!

Thank you for the extra info on warranty coverage after a gear swap.

[Sandor]

Originally Posted by Abomb1223

Do those gears work for the v6? Sorry I'm not that familiar with gears . .

At this time the 3.91 kit is available for SS models only. Do you think there is interest in a performance gearset for V6 models?

[hunterv6]

Originally Posted by Sandor

At this time the 3.91 kit is available for SS models only. Do you think there is interest in a performance gearset for V6 models?

I guess I should send mine back for the v8 guys then. (Not).They do fit the v6 manual only.

[tramtwo]

So funny thus thread is about swag... or was.

[Sandor]

Originally Posted by hunterv6

I guess I should send mine back for the v8 guys then. (Not).They do fit the v6 manual only.

I'm talking about a kit from Chevrolet Perfromance that includes a recalibration and dealership warranty.

[hunterv6]

Originally Posted by Sandor

I'm talking about a kit from Chevrolet Perfromance that includes a recalibration and dealership warranty.

In that case your correct. My bad. But I think they wanted to know if they fit.


Sent from my iPad using Tapatalk HD