03-19-2018, 05:57 AM | #1 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Running Turbo 400
Anyone on here who is using the 400 in their car have room for a trans shield or blanket? I have to get rid of this M6 & get going on a 400 trans. If it's too tight, I will just get a Reid case. Thanks. Craig
|
03-19-2018, 10:23 AM | #2 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
Yes there's room.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
03-19-2018, 10:32 AM | #3 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Really? I didn't think there was any room. I think the CSR is about the tightest fitting shield you can buy. Do you know If the stock bell bolts right up or do I need an Ultra bell? http://www.jegs.com/i/CSR/170/832/10002/-1
|
03-24-2018, 10:25 PM | #4 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
I'm not sure bud but there's pretty good amount of room around were the engine and tranny bolt up.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
|
|
|
|