06-16-2014, 09:31 PM | #15 |
|
I do. It has been in over a year. The hottest it gets is just over the 180 mark.
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-16-2014, 09:33 PM | #16 |
|
Ok, we can look into this. So far he has looked at the tune three times. I will ask if we have check this area.
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-16-2014, 09:47 PM | #17 |
|
I have passed this link to my tuner. I hope he can chime in. I am encouraged by the post, but like Chris, tuning is way above my skill level. LOL
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-16-2014, 09:47 PM | #18 | |
|
Quote:
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
Last edited by edog; 06-17-2014 at 08:54 AM. |
|
06-17-2014, 02:51 PM | #19 |
2K10 SS
Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009
Location: Southern Maryland
Posts: 356
|
hey Ernie if you want to call me I can tell you everything I know about your problem It is the same issues I was having hang in there buddy they will get it right.....
__________________
Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)...
|
06-17-2014, 06:29 PM | #20 |
|
I will call you later in the week. Let me know a better time. Night or day?
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-17-2014, 06:48 PM | #21 |
2K10 SS
Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009
Location: Southern Maryland
Posts: 356
|
anytime before 10 pm
__________________
Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)...
|
06-17-2014, 07:50 PM | #22 |
|
Sounds good.
Sent from my 831C using Tapatalk
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-23-2014, 09:11 PM | #23 |
|
Update...we were able to resolve the stalling. No more stalling. Woohoo! Upon braking it flutters as you come to a stop. 100 to 300 rpm, but does not dip below 700, and does not stall.
Sent from my 831C using Tapatalk
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-24-2014, 08:12 AM | #24 | |
Geek
|
Quote:
Care to share how? I bet I know .
__________________
01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001
x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1 x = ~x |
|
06-24-2014, 01:06 PM | #25 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
06-24-2014, 06:01 PM | #26 |
2K10 SS
Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009
Location: Southern Maryland
Posts: 356
|
What does the VVE table do?
__________________
Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)...
|
06-25-2014, 04:50 AM | #27 |
|
Played with idle and degrees of timing and air flow? Something like this. I am not the tuner, I just know he worked on these areas.
Sent from my 831C using Tapatalk
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-25-2014, 08:32 AM | #28 |
Geek
|
It's a volumetric efficiency table in lots of ECMs. In ours it's broken into a bunch of different coefficients and there is no real VE table. It's a virtual VE table in the E38. It is a way of determining how much fuel should be added based on several sensors. Lots of people just disable dynamic airflow and use the MAF sensor to determine fueling.
That makes sense. Glad you got it worked out.
__________________
01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001
x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1 x = ~x |
|
|
|
|