11-28-2008, 08:53 PM | #29 |
Petro-sexual
|
I doubt it. I believe the PCM will adjust to the intake and shorties fine. Cats', with the shorties, will still be the original ones, so there's no problem there. If you were going to run long tubes, then, you'd probably have to tune out the rear 02s at least, and maybe the front, depending on if the car is in Open Loop or Closed Loop. You could tune it if you wanted to extract every little bit of power, but you probably wouldn't really need to.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
11-28-2008, 10:52 PM | #30 |
Drives: the 2nd amendment home Join Date: May 2008
Location: OK
Posts: 14,707
|
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin |
11-29-2008, 04:25 PM | #31 | |||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Quote:
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
|||
11-29-2008, 04:47 PM | #32 | |
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
Quote:
600 bucks for 4 or 5 hp...what a deal!!! not.
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
|
11-29-2008, 04:58 PM | #33 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
hell, I could make my own for that price.
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
11-29-2008, 05:19 PM | #34 |
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
If they were 200 I wouldn't want them...
GM makes a very good manifold these days. High flow and thin walled...STOCK!
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
06-17-2010, 04:38 PM | #35 |
Account Suspended
Drives: 2010 SS/RS IBM White Rally M6 SROOF Join Date: Feb 2010
Location: Oakhurst NJ 07755
Posts: 77
|
|
06-17-2010, 07:01 PM | #36 |
Account Suspended
Drives: White 2010 RS/SS Join Date: Dec 2009
Location: San Diego
Posts: 672
|
http://www.google.com/#hl=en&source=...074d23dbd176d0
I think I saw $425.00 somewhere on line for 1 3/4" Stainless Shorties. |
06-17-2010, 08:35 PM | #37 |
Camaroless for now...
Drives: 2014 Blue Topaz Silverado Join Date: Sep 2009
Location: Arkansas
Posts: 1,411
|
Never thought I would say this but those are the ugliest damn headers ever...if there is such a thing.
Thoughts on how Long Tubes compare to shorties with a new midpipe with high flow cats? I know that does not make sense (just buy the Long tubes first) but I already have the shorties and they were at an extremely reduced rate.......
__________________
It was fun while it lasted.....
|
06-18-2010, 11:10 PM | #38 |
speed freak
Drives: 2015i Cadillac Escalade,10 IOM 2ss Join Date: Jun 2009
Location: Neenah Wi
Posts: 1,143
|
I picked up my JBAs for $203 new. I had then coated and just installed them last weekend.When I do the cam I may put long tubes on or Solo has a high flow cat coming for the L99.
__________________
Current:2015i Cadilac Escalade,2016 Lexus RC350,2011 CVO StreetGlide cammed,tuned & loud. 2010 IMO/IO,custom stripes,GFX,sunrf,solo exhaust,JBA shorties,rotofab,Jannetty tune,Pfadt,JLw6 Audison&Hertz,7/4/09 2GIFKIEJ6A9123779Del 7/10/09
Former Camaros 72 LT1 Z28, 86 z28 [SIGPIC] |
06-18-2010, 11:28 PM | #39 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
So you necro'd this 1.5yo thread to say "HA" ?
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Detroit News panel wants GM to build Camaro concept | Tran | 5th Gen Camaro SS LS LT General Discussions | 12 | 03-15-2009 04:38 PM |
Cheryl Pilcher (Fbodmother) Questions & Answers | camaro5 | 5th Gen Camaro SS LS LT General Discussions | 2 | 04-19-2008 05:07 PM |