hex vent install...where at? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

caper · 07-25-2014, 02:58 PM

anyone have these installed anywhere near the IE? wondering where and the cost? any help?

Behic2320 · 07-25-2014, 03:02 PM

Shoul be pretty easy to do, I would do them yourself if you really want a shop to do them my buddies shop is in the Riverside. Its called Inland Empire Auto Body and Paint call them and ask for Isaac and tell him Grant sent you.

Q'smuscle · 07-25-2014, 03:02 PM

I know someone with a 1LE has it! Should chime in soon!

caper · 07-26-2014, 11:36 AM

Quote:

Originally Posted by Behic2320

Shoul be pretty easy to do, I would do them yourself if you really want a shop to do them my buddies shop is in the Riverside. Its called Inland Empire Auto Body and Paint call them and ask for Isaac and tell him Grant sent you.

I could do it myself I am sure. I did a search on here and seen a guy (not in socal) that had his done by a shop for 225. I would pay someone that to do mine. but I stopped by the place the painted my car and he started throwing out like 1k...I was like WTF!...yeah if it is anywhere near that much I will be doing it myself. I teach little kids, I can trace lines and cut lol.

iceman5730 · 07-26-2014, 11:56 AM

Had mine installed at Cfest Texas. They work great reduced engine temp by 10 degrees min. However when they are install I would strongly recommend that you reattach the cross member supports which have to cut back to the main hood. Use good auto epoxy. If you do not the hood will start flapping at speeds over 98 mph. Very scary.

07-25-2014, 02:58 PM	#1
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	hex vent install...where at? anyone have these installed anywhere near the IE? wondering where and the cost? any help? __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

07-25-2014, 03:02 PM	#2
Behic2320 SoCal HT5 COTW 4/21/13 Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011 Location: Sandy Eggo Posts: 3,047	Shoul be pretty easy to do, I would do them yourself if you really want a shop to do them my buddies shop is in the Riverside. Its called Inland Empire Auto Body and Paint call them and ask for Isaac and tell him Grant sent you. __________________

07-26-2014, 11:56 AM	#5
iceman5730 Iceman Drives: 2011 Camaro 2LT SC/RS CGM Join Date: Jan 2011 Location: Chilliwack British Columbia Canada Posts: 639 View My Garage	Had mine installed at Cfest Texas. They work great reduced engine temp by 10 degrees min. However when they are install I would strongly recommend that you reattach the cross member supports which have to cut back to the main hood. Use good auto epoxy. If you do not the hood will start flapping at speeds over 98 mph. Very scary. __________________

07-25-2014, 03:02 PM	#3
Q'smuscle Account Suspended Drives: 2011 Camaro VR 2SS/RS & Impala Join Date: Apr 2013 Location: Riverside,ca Posts: 5,342 View My Garage	I know someone with a 1LE has it! Should chime in soon!