02-23-2013, 07:56 PM | #1 |
Drives: 2011 Camaro RS 2LT Join Date: Jul 2012
Location: Edmonton Alberta Canada
Posts: 762
|
HELP!!!! Oil EXPLOSION in MOTOR WTF!? (Pics WARNING: Graphic)
The destruction... Catch Can Also I found this and put a cap over it yesterday... They took this out???.. HELP!!!!! Ok, so the crew at my dealership I work at installed my Catch Can, Stage 3 Ported IM and removed the ghetto felt material from the valve covers. And this happened today on the ride home...... Did they botch the install of the Catch Can?? I am NOT a mechanic but what has happened?! What do I do sorry I am panicking!! :( |
02-23-2013, 08:08 PM | #2 |
Don't Sleep on My V6
|
Yeah man they hooked up the hoses wrong. Also why you was getting smoke from the breather like you posted in the other thread! I know it's your place of work, but have them clean up the bay. Also seafoam or remove the IM and have it cleaned also. because it's all a oily mess now.
__________________
|
02-23-2013, 08:09 PM | #3 |
Drives: 2011 LS Join Date: Oct 2010
Location: FL
Posts: 1,643
|
Normal to take that out with a breather but should be capped on both ends. Check intake tube and make sure it is capped.
__________________
|
02-23-2013, 08:12 PM | #4 | |
Drives: 2011 Camaro RS 2LT Join Date: Jul 2012
Location: Edmonton Alberta Canada
Posts: 762
|
Quote:
Whats the intake tube end?! |
|
02-23-2013, 08:19 PM | #5 |
Don't Sleep on My V6
|
Yes reverse the hoses and it's good to go. Also if you look at the 3rd picture you posted thats the end of the tube that needs to be capped off.
__________________
|
02-23-2013, 08:22 PM | #6 |
Drives: 2011 Camaro RS 2LT Join Date: Jul 2012
Location: Edmonton Alberta Canada
Posts: 762
|
|
02-23-2013, 08:30 PM | #7 |
Don't Sleep on My V6
|
Anytime man, Once the hoses are switched and you smoke out the breather. Do what was said in the other thread and make that PCV orifice hole bigger.
__________________
|
02-23-2013, 08:38 PM | #8 |
Drives: 2011 Camaro RS 2LT Join Date: Jul 2012
Location: Edmonton Alberta Canada
Posts: 762
|
How do I smoke the breather? and Also how should I clean this oil slick? Spray with high pressure hose and use engine cleaner?
|
02-23-2013, 08:54 PM | #9 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
May I also add you might want to do an oil change? Just cause you are not sure how much oil you lost and you don't want to add a wrong amount and make matters worse.
|
02-23-2013, 08:56 PM | #10 |
Drives: 2011 Camaro RS 2LT Join Date: Jul 2012
Location: Edmonton Alberta Canada
Posts: 762
|
Do I need to do an upper induction cleaning as well? How do I clean this disgrace?
|
02-23-2013, 09:12 PM | #11 |
having FUN now 13.66@101
|
Sorry I am late to the help. But the others have told you the right stuff. Hoses were backwards, see my install photo. Your dealer should be doing the entire clean-up for botching the install job. If they don't know what they are doing maybe they should ask. For sure I would not go to that dealer again for installs. If you need to clean it your self, engine cleaning foam and high PSI spray will work. I would cover the elctronic boxes first thou. Also be sure to cap those ends at both the intake side and back of driver side valve cover. See my attached photos. good luck.
__________________
|
02-23-2013, 10:14 PM | #12 |
Drives: 2011 LS Join Date: Oct 2010
Location: FL
Posts: 1,643
|
Thanks for the pic on the intake much better than I could do with words.
__________________
|
02-23-2013, 11:03 PM | #13 |
Don't Sleep on My V6
|
Our team work has always been great un the V6 community.
Sent from my Samsung Galaxy S III
__________________
|
02-23-2013, 11:49 PM | #14 |
Drives: 2012 2LT/RS, 2005 SLK55 AMG Join Date: Jul 2012
Location: Falls Church, VA
Posts: 1,163
|
Sorry to hear that man... Did you give them the installation instructions? I would definitely make your dealership crew make everything right.
|
|
|
|
|