What Did You Do To Your Camaro Today? - Page 1424 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Angrybird 12 · 07-25-2017, 09:16 AM

When I upgraded my GPS to a larger model my old GPS mount no longer worked. So I used my 3D Printer and made this one.

CamaroFred · 07-25-2017, 10:21 AM

Quote:

Originally Posted by Daxal84

Put in this carbon fiber center console I got off another member.

Sent from my Nexus 6P using Tapatalk

That makes me dizzy.

Quote:

Originally Posted by Angrybird 12

When I upgraded my GPS to a larger model my old GPS mount no longer worked. So I used my 3D Printer and made this one.

I tried the GPS a few times. Always told me to turn right 3 times to make a left.
Led me onto a road closed.
Put me on a one lane gravel road with firewood in the potholes and signs on the fences proclaiming "Protected by a Smith & Wesson"
Led me out to another gravel road where coverage was inaccessible. All we wanted was dinner. Weaseled back to the motel and the clerk gave me directions to one of the best prime rib restaurants in the country.

lafountain · 07-25-2017, 10:26 AM

Wasn't today, but installed a catch can into my car on Friday. Bought the car with 43k, didn't have one, so wanted to get one installed, so got that done.

mudwheel57 · 07-25-2017, 10:33 AM

Painted it

lafountain · 07-25-2017, 10:38 AM

Quote:

Originally Posted by mudwheel57

Painted it

That might be the first time I have ever seen/heard of someone painting the antenna while it was still on the car.

Angrybird 12 · 07-25-2017, 11:15 AM

Quote:

Originally Posted by CamaroFred

I tried the GPS a few times. Always told me to turn right 3 times to make a left.
Led me onto a road closed.
Put me on a one lane gravel road with firewood in the potholes and signs on the fences proclaiming "Protected by a Smith & Wesson"
Led me out to another gravel road where coverage was inaccessible. All we wanted was dinner. Weaseled back to the motel and the clerk gave me directions to one of the best prime rib restaurants in the country.

Did you have it set to a female voice????

My wife gets lost easily..

gpskinzhut · 07-25-2017, 12:44 PM

Quote:

Originally Posted by CamaroFred

I tried the GPS a few times. Always told me to turn right 3 times to make a left.
Led me onto a road closed.
Put me on a one lane gravel road with firewood in the potholes and signs on the fences proclaiming "Protected by a Smith & Wesson"
Led me out to another gravel road where coverage was inaccessible. All we wanted was dinner. Weaseled back to the motel and the clerk gave me directions to one of the best prime rib restaurants in the country.

We were out in the '14 a few weeks ago looking for a property and using the MyLink NAV. The wife was saying "Ha ha I have something you don't have!" since I didn't get NAV in my '17. It started sending us in circles down dead end streets. I had some fun going "ha ha your car has something mine doesn't have, a retarded GPS". She was all like "Shut up!" and pouting while trying not to laugh. Fired up maps on my phone and we were one street over from where we were supposed to be going. I had a good time with that one.

BlazeNGlory · 07-25-2017, 02:59 PM

Installed VMAX Ice-olator. Had it for about a year and a half and just haven't had the time to install. My son and I just finished the installation.

orange devil · 07-25-2017, 04:50 PM

Installed some white door panels and dash trim and and some other red accents..the past few day

Gunmetal Speedster · 07-25-2017, 05:10 PM

Decided that my back right tire looks better with no air in it

mudwheel57 · 07-25-2017, 05:33 PM

Quote:

Originally Posted by lafountain

That might be the first time I have ever seen/heard of someone painting the antenna while it was still on the car.

And it turned out quite well.

davesnever · 07-25-2017, 06:54 PM

Quote:

Originally Posted by Angrybird 12

When I upgraded my GPS to a larger model my old GPS mount no longer worked. So I used my 3D Printer and made this one.

Now that's what I call awesome! I hate the suction cup mounts and IMO that just looks so much better, good on you!

CamaroFred · 07-25-2017, 07:03 PM

Quote:

Originally Posted by Angrybird 12

Did you have it set to a female voice????

My wife gets lost easily..

No, that was my wife when we wanted to go around St. Louis so I took the I270. She kept telling me how wrong I was so I finally gave up and took an exit to get us back on I70. Every traffic signal was an adventure. If there wasn't a hooker some guy wanted to wash my windshield. So we get back on the I70 and a few miles later comes the sign for the intersection with I270.
She got real quiet after that.

Quote:

Originally Posted by Gunmetal Speedster

Decided that my back right tire looks better with no air in it

When they were re-roofing our house I had three nails in three days, And I was parking a half a block away! I had the wheel and tire protection so it didn't cost me anything but on the third day the service manager just about rolled on the floor he was laughing so hard when I pulled in! So that eased my pain.

Angrybird 12 · 07-25-2017, 07:23 PM

Quote:

Originally Posted by davesnever

Now that's what I call awesome! I hate the suction cup mounts and IMO that just looks so much better, good on you!

I am working on a little different design trying to make it not look so clunky..

07-25-2017, 09:16 AM	#19923
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	When I upgraded my GPS to a larger model my old GPS mount no longer worked. So I used my 3D Printer and made this one. Attached Images __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

07-25-2017, 10:26 AM	#19925
lafountain Drives: 2011 Synergy Green 2SS/RS Join Date: Mar 2008 Location: Lexington Park, MD Posts: 887	Wasn't today, but installed a catch can into my car on Friday. Bought the car with 43k, didn't have one, so wanted to get one installed, so got that done. __________________ Hey, you want to lay the fate of the world on the kid's Camaro? That's cool. I bought a car, turned out to be an alien robot. Who knew?

07-25-2017, 10:33 AM	#19926
mudwheel57 Account Suspended Drives: 2015 camaro 2LS Join Date: Sep 2015 Location: Burley, Idaho Posts: 204 View My Garage	antenna Painted it Attached Images

07-25-2017, 02:59 PM	#19930
BlazeNGlory Drives: 2011 Camaro 1LT Join Date: Jan 2015 Location: So Cal Posts: 216 View My Garage	Installed VMAX Ice-olator. Had it for about a year and a half and just haven't had the time to install. My son and I just finished the installation. __________________ Hotchkis Lowering Springs, Pfadt Balance Rear Sway Bar, BMR End Links, Cadillac ATS Front Brembo 4-Piston Brakes, VMAX Ported Throttle Body, VMAX Ice-olator, Volant Cold Air Intake, Magnaflow Resonated X-Pipe, Magnaflow Axle-Back Exhaust, JEGS Exhaust Cutouts, GM Strut Tower Brace, Hurst Comp Shifter, Heritage Front Grill, 3D Carbon Front Air Dam, T-Rex Lower Billet Grill, 3D Carbon Front Vendor Vents, 20x9 OEM Polished RS/SS Wheels Front & Rear

07-25-2017, 04:50 PM	#19931
orange devil Account Suspended Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017 Location: California Posts: 1,694	Installed some white door panels and dash trim and and some other red accents..the past few day Attached Images

07-25-2017, 05:10 PM	#19932
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Decided that my back right tire looks better with no air in it __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM