mrt ver 2 installed last night - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

flavp5 · 07-25-2012, 07:14 AM

thanks to juiced for the deal
sounds awesome, sound clips dont do it justice.

only thing is i need to adjust the outlets as i find they are sitting a little too close to the diffuser . whats the easiest way to adjust? with the rubber hangers?

bee sting · 07-25-2012, 07:19 AM

Congrats and Welcome to the MRT-ARMY

AdamChoudhry · 07-25-2012, 09:09 PM

Common issue with these. I removed the spacer in the clamp and used an impact wrench to tighten the clamp more than possible with the spacer. That worked very well for me but I know people get them welded

GTFD2 · 07-25-2012, 09:43 PM

Thanks for the suggestion to remove the spacers. Been having the same problem with mine.

AdamChoudhry · 07-25-2012, 10:04 PM

You're going to have to get a little rough with the clamp to get the spacer off. I had to bend mine and smack the spacer with a hammer a few times but it works.

menendez1293 · 07-25-2012, 11:23 PM

Awsome. I can't wait to get mine. More than halfway there where I get paid for a graphic design Job soon

rtcat600man · 07-26-2012, 06:37 AM

Congrats and as Bee said welcome to the MRT TEAM.

armyxrays · 07-26-2012, 11:32 AM

I had the same problem to the point that it started to melt the diffuser. I took it in and had them welded. Problem solved.

Getting them welded didn't cost much and it took about 20 minutes.

GTFD2 · 07-31-2012, 08:38 PM

Got mine taken care of by removing the bolt and taking out the space. I might just have a small tack weld to make sure the hold in place.

Lil' Nasty · 07-31-2012, 09:07 PM

Got mine from Jason @ juiced as well great guy and deal

Juiced1 · 07-31-2012, 09:39 PM

Thanks for the shout out guys! I'm glad you like the system!

hkim562 · 08-02-2012, 05:19 AM

Quote:

Originally Posted by Franklin's Bee

Got mine from Jason @ juiced as well great guy and deal

Got mine from Jason at Juiced also. Fast shipping and super deals. Bought the Roto Fab CAI and MRT v2.

07-25-2012, 07:14 AM	#1
flavp5 Drives: 2011 victory red 1LT coupe Join Date: Mar 2012 Location: Newfoundland, Canada Posts: 79	mrt ver 2 installed last night thanks to juiced for the deal sounds awesome, sound clips dont do it justice. only thing is i need to adjust the outlets as i find they are sitting a little too close to the diffuser . whats the easiest way to adjust? with the rubber hangers? __________________ 2011 Victory Red Camaro coupe 1LT 6M Vararam Ram air intake Hurst Billet short throw shifter Emblempro custom emblems MRT ver 2.0 exhaust

07-25-2012, 07:19 AM	#2
bee sting Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010 Location: Suffolk Virginia Posts: 1,933 View My Garage	Congrats and Welcome to the MRT-ARMY __________________

07-25-2012, 10:04 PM	#5
AdamChoudhry Drives: 2010 Camaro 1LT Join Date: Jul 2010 Location: NJ Posts: 63 View My Garage	You're going to have to get a little rough with the clamp to get the spacer off. I had to bend mine and smack the spacer with a hammer a few times but it works. __________________ Current Mods: MRT 2.0, Injen CAI, RX 3/8 Black Ice-olator, Rx Catch Can, 20x10 American Racing Black/Chrome wheels, JL Audio W7, Gill Inserts.

07-26-2012, 06:37 AM	#7
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	Congrats and as Bee said welcome to the MRT TEAM. __________________ MY BUILD

07-26-2012, 11:32 AM	#8
armyxrays Drives: 2011 2LS All Black Camaro Join Date: Sep 2011 Location: Fresno, CA Posts: 80	I had the same problem to the point that it started to melt the diffuser. I took it in and had them welded. Problem solved. Getting them welded didn't cost much and it took about 20 minutes. __________________ Mods: Blacked out bowties, Roto-Fab CAI, Powder-Coated Rims on P-Zeros, MRT 2.0 Exhaust, Heritage Grille, Rear Spoiler, USB Port with Bluetooth package, Lowered 1inch all around, Window Tint, Matte Black hood spears, rocker panels, gill inserts

07-25-2012, 09:09 PM	#3
AdamChoudhry Drives: 2010 Camaro 1LT Join Date: Jul 2010 Location: NJ Posts: 63 View My Garage	Common issue with these. I removed the spacer in the clamp and used an impact wrench to tighten the clamp more than possible with the spacer. That worked very well for me but I know people get them welded

07-25-2012, 09:43 PM	#4
GTFD2 Drives: C7 2LT Vert 2014/2LT RS 2012 Join Date: Jun 2011 Location: Grafton OH Posts: 234	Thanks for the suggestion to remove the spacers. Been having the same problem with mine.

07-25-2012, 11:23 PM	#6
menendez1293 Emerald Coast Camaros Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009 Location: Tallahassee FL Posts: 9,687 View My Garage	Awsome. I can't wait to get mine. More than halfway there where I get paid for a graphic design Job soon

07-31-2012, 08:38 PM	#9
GTFD2 Drives: C7 2LT Vert 2014/2LT RS 2012 Join Date: Jun 2011 Location: Grafton OH Posts: 234	Got mine taken care of by removing the bolt and taking out the space. I might just have a small tack weld to make sure the hold in place.

07-31-2012, 09:07 PM	#10
Lil' Nasty [COTW 4/13/15] Drives: Supercharged LLT Join Date: Jul 2010 Location: Florida Posts: 5,957	Got mine from Jason @ juiced as well great guy and deal __________________ LiL' Nasty's Build Journal

07-31-2012, 09:39 PM	#11
Juiced1 Account Suspended Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011 Location: St. Charles, IL Posts: 18,663	Thanks for the shout out guys! I'm glad you like the system!