Shifter Options; Who Changed thier's out? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JFWJR179 · 10-04-2012, 06:27 PM

Quote:

Originally Posted by SamHouseIII

I don't know if the hurst will work, I saw on a vendors site that it is not for the ZL1?

Have to contact Hurst in the morning....

I believe you are correct.
The Hurst 3916030 shifter will not fit the ZL1 Camaro.
Hurst needs to produce a new billet/plus especially for the ZL1.

Check out the link that says the p/n 3916030 will not fit ZL1:

http://www.lmperformance.com/53776/119.html

flyingfortress1944 · 10-05-2012, 02:12 AM

Quote:

Originally Posted by JFWJR179

I believe you are correct.
The Hurst 3916030 shifter will not fit the ZL1 Camaro.
Hurst needs to produce a new billet/plus especially for the ZL1.

Check out the link that says the p/n 3916030 will not fit ZL1:

http://www.lmperformance.com/53776/119.html

not tue.i have the hurst billet plus shifter on my 2013 zl1 and it works great.that must be an error on the lmperformance site.also please refer to the video above,the hurst is a much closer short throw than stock.

SamHouseIII · 10-05-2012, 06:18 AM

Quote:

Originally Posted by flyingfortress1944

not tue.i have the hurst billet plus shifter on my 2013 zl1 and it works great.that must be an error on the lmperformance site.also please refer to the video above,the hurst is a much closer short throw than stock.

This is the info I am looking for, Can you post up a pic?

flyingfortress1944 · 10-05-2012, 09:28 AM

Quote:

Originally Posted by SamHouseIII

This is the info I am looking for, Can you post up a pic?

the video is directly above this post.click on it and watch it.this is on a 203 zl1.

SamHouseIII · 10-05-2012, 09:30 AM

Quote:

Originally Posted by flyingfortress1944

the video is directly above this post.click on it and watch it.this is on a 203 zl1.

A pic of the shifter in your car

SamHouseIII · 10-05-2012, 09:33 AM

Quote:

Originally Posted by flyingfortress1944

the video is directly above this post.click on it and watch it.this is on a 203 zl1.

Video is not from a ZL1, look at the TCM button.....and no boost gauge

flyingfortress1944 · 10-05-2012, 09:41 AM

but they are the same in terms of compatability.the only thing that you have to change out is the shifter knob.the hurst billet plus shifter is a screw on type but it comes with a ball type shifter knob that just screws on .it is 3/8x16 and the stock zl1 is a non screw slip on shifter knob.the hurst will work just fine without any mods.there is no difference between any v8 camaros(ss,zl1) when you change out the shifter.

flyingfortress1944 · 10-05-2012, 09:48 AM

this is from phastek performance.see,it fits the zl1.
Hurst Billet/Plus 2 Short Shifter for your 2010, 2011, 2012, 2013 Camaro SS, LS, LT, 45th, RS, and ZL1 (V8 & V6 Manual Transmission Only) Part number 3916030 for sale

Read more: http://www.phastekperformance.com/20...#ixzz28R5nKA6H

SamHouseIII · 10-05-2012, 05:25 PM

This is a simple request, if you have one in your car, POST THE PICTURE!!!!

flyingfortress1944 · 10-06-2012, 02:36 AM

my car is at leading edge performance in las vegas being built as we speak.Its about 8 feet up on the lift and the engine just went in today(cam,pullies,heads,headers,cat back,cai,etc).i will try to stop in on Monday and take the all important picture for you.i certainly have given you alot of my input already and i have posted where you can call and know that it does fit.as a matter of fact a DIRECT bolt in.

SamHouseIII · 10-06-2012, 08:00 AM

Quote:

Originally Posted by flyingfortress1944

my car is at leading edge performance in las vegas being built as we speak.Its about 8 feet up on the lift and the engine just went in today(cam,pullies,heads,headers,cat back,cai,etc).i will try to stop in on Monday and take the all important picture for you.i certainly have given you alot of my input already and i have posted where you can call and know that it does fit.as a matter of fact a DIRECT bolt in.

You know what they say.......

It seems like no one has done this other than you, I say Kudos to you and just want to be sure that before I spend about 6 bills that it will work.

Thanks for all the responses.

oldtoad · 10-06-2012, 04:38 PM

OK guys, I will post pictures when I am done with the install in my 13 ZL1, But who can help with information on how to get the stock shift knob OFF.
It says in the video it is hard to get off and they weren't kidding. I am not sre I have budged it.

Any Help would be much appreciated.

RedZL1 · 10-06-2012, 05:04 PM

Quote:

Originally Posted by oldtoad

OK guys, I will post pictures when I am done with the install in my 13 ZL1, But who can help with information on how to get the stock shift knob OFF.
It says in the video it is hard to get off and they weren't kidding. I am not sre I have budged it.

Any Help would be much appreciated.

Toad,
You could pull on that thing till you dislocated a shoulder and it still wouldn't budge. There is a set screw that holds the stock knob on. Check out this thread.

http://www.camaro5.com/forums/showth...t=shifter+knob

oldtoad · 10-06-2012, 08:00 PM

I just went out and checked and you were correct! There is a set screw as it says in the tread. Back at it in the morning and reinspired.

Many Thanks.

10-05-2012, 05:25 PM	#23
SamHouseIII I Carry! Drives: 2013 CRT ZL1 Join Date: Jul 2011 Location: Fletcher, Ok Posts: 2,722	This is a simple request, if you have one in your car, POST THE PICTURE!!!! __________________ I am a Modaholic!! Please Help!! Do Not feed my addicition....See build... http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/

10-06-2012, 04:38 PM	#26
oldtoad Drives: Victory Red ZL1 Join Date: Sep 2012 Location: Sonoma County Posts: 44	Hurst Shifter OK guys, I will post pictures when I am done with the install in my 13 ZL1, But who can help with information on how to get the stock shift knob OFF. It says in the video it is hard to get off and they weren't kidding. I am not sre I have budged it. Any Help would be much appreciated.

10-06-2012, 08:00 PM	#28
oldtoad Drives: Victory Red ZL1 Join Date: Sep 2012 Location: Sonoma County Posts: 44	Thanks I just went out and checked and you were correct! There is a set screw as it says in the tread. Back at it in the morning and reinspired. Many Thanks.

10-05-2012, 09:41 AM	#21
flyingfortress1944 Drives: 2013 ZL1 Join Date: Aug 2012 Location: Las Vegas,NV Posts: 94	but they are the same in terms of compatability.the only thing that you have to change out is the shifter knob.the hurst billet plus shifter is a screw on type but it comes with a ball type shifter knob that just screws on .it is 3/8x16 and the stock zl1 is a non screw slip on shifter knob.the hurst will work just fine without any mods.there is no difference between any v8 camaros(ss,zl1) when you change out the shifter.

10-05-2012, 09:48 AM	#22
flyingfortress1944 Drives: 2013 ZL1 Join Date: Aug 2012 Location: Las Vegas,NV Posts: 94	this is from phastek performance.see,it fits the zl1. Hurst Billet/Plus 2 Short Shifter for your 2010, 2011, 2012, 2013 Camaro SS, LS, LT, 45th, RS, and ZL1 (V8 & V6 Manual Transmission Only) Part number 3916030 for sale Read more: http://www.phastekperformance.com/20...#ixzz28R5nKA6H

10-06-2012, 02:36 AM	#24
flyingfortress1944 Drives: 2013 ZL1 Join Date: Aug 2012 Location: Las Vegas,NV Posts: 94	my car is at leading edge performance in las vegas being built as we speak.Its about 8 feet up on the lift and the engine just went in today(cam,pullies,heads,headers,cat back,cai,etc).i will try to stop in on Monday and take the all important picture for you.i certainly have given you alot of my input already and i have posted where you can call and know that it does fit.as a matter of fact a DIRECT bolt in.