HID fog light kit

[TLD0520]

Looking for an 8000K HID fog light kit. Not exactly sure where to find one or what the bulb size is. If someone could give me a link or atleast the size of the bulb that would work. Thanks

[jungsoo726]

Ditto on second post

[mekc57]

I ran across this the other day
http://www.bfxenon.com/Camaro_Xenon_...t_kit_s/48.htm
I don't know anything about them but they come with the fog light housing replacment for the SS.

I will probably do this later, just ordered plasma LED's for now

[SNV]

Originally Posted by RedDragonSS

It will melt the factory housing... You need to modify to glass or buy a new Glass housing all together from what I have understood.. (Correct me if I'm wrong please)Looks fresh though... I went with a LED bulb and it look like HID minus the extra light.. Also heard of a plasma bulb that is even better than LEDs. The bulb is a 5202 stock and HID needs to be retrofitted... Good luck

Ok I will correct you and the others lol. I have been running HID fogs for about a year and a half not. No melt, discoloring, and plug and play. Ruuning an 8k 25watt kit from here http://www.spencershids.com/index.ph...pper&Itemid=54
Just to clear up a few things here are a few facts. The first hid 5202 kits that came out were not 5202 bulbs. People modded their housing and used silicone to hold them in place. The silicone melted shifting the bulb and melted the housing. People puts lenses tint over the lenses and kept heat in and melted the lenses. Running a 35watt kit is not a good idea. The HID bulb is cooler but is longer. This place the tip close to the lenses. Vendors pushing leds have told you hids will melt everything.
The truth is if you run the correct set you will not have a problem. As I said I have been running them for around a year and a half. It is one of the very first mods I did to my car.
If you have DLR's due to the RS package that is a different story. There is no true plug and play kit out there.