2 catch can questions - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IneedAZ · 09-07-2014, 12:44 PM

1) Anyone know if the plastic fittings on a RX catch can can be replaced? I think I have leaky fittings. If I spray fluid near the fittings my AFR drops.

2) Whats the difference in Elite vs Apex catch cans other then the bracket?

dmginc · 09-07-2014, 06:38 PM

Quote:

Originally Posted by IneedAZ

1) Anyone know if the plastic fittings on a RX catch can can be replaced? I think I have leaky fittings. If I spray fluid near the fittings my AFR drops.

2) Whats the difference in Elite vs Apex catch cans other then the bracket?

i would assume you can find fittings to replace the ones on the RX can but I like many other people dont like their setup with the drain tube.

the Elite and Apex cans are very similar aside from the bracket. i am going to go with the Apex can personally.

mickmosh · 09-07-2014, 06:38 PM

Fitting can be replaced on rx can. which one is leaking?
I don't know anything about 2nd question

IneedAZ · 09-08-2014, 07:25 AM

both...leaking air. Was wondering if they have to be drilled out to replace them.

djcfuzz · 09-08-2014, 10:05 AM

If it were me, I would pick up an Elite or Apex can and not bother with the RX can. So much easier to empty too.

IneedAZ · 09-08-2014, 10:54 AM

Quote:

Originally Posted by djcfuzz

If it were me, I would pick up an Elite or Apex can and not bother with the RX can. So much easier to empty too.

I am tempted, but its money down the drain yet again...may come to that. I wish i knew whats the internal difference if any between the elite and apex. I like the Apex bracket better cause the elite puts the can in the way of my nitrous solenoids.

Jason@JacFab · 09-08-2014, 11:03 AM

Do a Google image search on the apex and elite Catch cans. The differences are easy to spot.

As for the fittings on the RX can it looks like the outlet fitting unscrews, and the inlet just pushes on

You'll probably have to contact Tracy @ rx for replacements.

IneedAZ · 09-08-2014, 11:30 AM

I think his can is the only one with a check valve for the exit, wonder if its really needed

Jason@JacFab · 09-08-2014, 12:53 PM

I know in some instances where the car is in a cold climate area the check valve is sometimes removed because it can freeze the condensation inside it during the winter months and cause the crankcase to become over pressurized.

kevinw · 09-22-2014, 09:37 PM

well i bought a catch can from Ohio Speed, and couldnt get it hooked up as the lines they supplied are not the right size. so, need to go to Oreilley to get correct lines, as i bought this can new in January, but just now getting to get it installed with my cold air intake, which i did get installed tonite.

911medic · 09-22-2014, 09:43 PM

Quote:

Originally Posted by kevinw

well i bought a catch can from Ohio Speed, and couldnt get it hooked up as the lines they supplied are not the right size. so, need to go to Oreilley to get correct lines, as i bought this can new in January, but just now getting to get it installed with my cold air intake, which i did get installed tonite.

Ahhh, the sweet, sweet sound of a freshly installed cold air intake!

Enjoy!

09-07-2014, 12:44 PM	#1
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	2 catch can questions 1) Anyone know if the plastic fittings on a RX catch can can be replaced? I think I have leaky fittings. If I spray fluid near the fittings my AFR drops. 2) Whats the difference in Elite vs Apex catch cans other then the bracket? __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

09-08-2014, 07:25 AM	#4
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	both...leaking air. Was wondering if they have to be drilled out to replace them. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

09-08-2014, 10:05 AM	#5
djcfuzz Do somethin fun every day Drives: 2012 45th V6 RS M6 Join Date: Dec 2011 Location: North Port, FL Posts: 1,012 View My Garage	If it were me, I would pick up an Elite or Apex can and not bother with the RX can. So much easier to empty too. __________________ My garage: http://www.camaro5.com/forums/camaro...=view&id=16627

09-08-2014, 11:30 AM	#8
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	I think his can is the only one with a check valve for the exit, wonder if its really needed __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

09-07-2014, 06:38 PM	#3
mickmosh Drives: 2018 Camaro ZL1 Join Date: Nov 2012 Location: Melbourne Fl Posts: 57 View My Garage	Fitting can be replaced on rx can. which one is leaking? I don't know anything about 2nd question

09-08-2014, 11:03 AM	#7
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Do a Google image search on the apex and elite Catch cans. The differences are easy to spot. As for the fittings on the RX can it looks like the outlet fitting unscrews, and the inlet just pushes on You'll probably have to contact Tracy @ rx for replacements.

09-08-2014, 12:53 PM	#9
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	I know in some instances where the car is in a cold climate area the check valve is sometimes removed because it can freeze the condensation inside it during the winter months and cause the crankcase to become over pressurized.

09-22-2014, 09:37 PM	#10
kevinw Drives: 2013 Black 2 LT vert Join Date: Jul 2013 Location: kansas city Posts: 1,765	well i bought a catch can from Ohio Speed, and couldnt get it hooked up as the lines they supplied are not the right size. so, need to go to Oreilley to get correct lines, as i bought this can new in January, but just now getting to get it installed with my cold air intake, which i did get installed tonite.