04-01-2008, 09:27 PM | #1 |
Drives: 03 Cobra 644rwhp Join Date: Apr 2008
Location: Raleigh nc
Posts: 9
|
Anyone building an engine before you get the car.
Just wondering if anyone is going to build some type of crazy engine after they find out what its going to come with. That way you woul dhave a engine to drop right in the day you get it.
|
04-01-2008, 09:30 PM | #2 |
IS IT 2009 YET???
|
Sounds like fun...but not willing to destroy my warrenty the day i drove it off the lot!
__________________
Don't love me just for my FBod
|
04-01-2008, 09:33 PM | #3 |
Reality Check Specialist
|
I'd do it... mostly because I was probably going to be the one fixing things on any car I buy, anyway, so why buy the extended warranty or worry with a warranty... build what you want and when you get the car, drop the powerplant in and mothball the original one... you'll always have it as a backup engine.
__________________
got tequila?
|
04-01-2008, 09:37 PM | #4 | |
IS IT 2009 YET???
|
Quote:
__________________
Don't love me just for my FBod
|
|
04-01-2008, 09:47 PM | #5 |
~ANTI-FORD~
|
Its crossed my head..... :] but I'll keep the stock motor and just add mods most likely
|
04-02-2008, 04:43 AM | #6 |
Drives: 03 Cobra 644rwhp Join Date: Apr 2008
Location: Raleigh nc
Posts: 9
|
pull the engine and trans and rear and do a twin turbo 408 with turbo 400 and a solid 9 inch rear done
|
04-02-2008, 04:56 AM | #7 |
I could pull the 500Hp motor my uncle put in my girlfriends vette before we sell it.
|
|
04-02-2008, 08:19 AM | #8 | |
Drives: 99 Grand Prix Join Date: Jul 2007
Location: Toronto
Posts: 334
|
Quote:
As for me, only simple mods...exhaust, intake, LT headers, and well...we'll see with what the aftermarket comes up with for performance upgrades to the car |
|
04-02-2008, 08:27 AM | #9 |
Where's the Beer?
Drives: 07 Tacoma :( Join Date: Mar 2008
Location: North Carolina
Posts: 68
|
Same here, simple mods. Hope it is going to be easy to work on.
__________________
|
04-02-2008, 09:42 AM | #10 |
Petro-sexual
|
+2
Because of the crappy hippies here in California, I'll be limited to these kinds of upgrades, minus the long tubes. I might get shorties, just to say I have headers, but I'm hoping that there will be a supercharged model so I can just pulley up, dyno tune it, intake, catback, and call it good. I want to keep the warranty and am crossing my fingers for performance upgrades from GMPP, so I'm hoping to be able to find these parts from GM, keep the warranty, and make some more power. I would like it to be easy to work on, but I think I'm not going to spend as much time under the hood as my last two 4th Gens. Let's face it; these cars don't need a lot of up-keep under the hood, so unless you are doing a lot of changes or upgrades, accessablility won't be too big an issue for me. It would be nice though
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
04-02-2008, 10:35 AM | #11 |
Moderator
|
I'll keep the motor relatively stock until the warranty runs out. Then it's swapping time.
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
04-02-2008, 12:04 PM | #12 | |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Quote:
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
04-02-2008, 12:38 PM | #13 |
Petro-sexual
|
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
04-02-2008, 04:28 PM | #14 |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Same letter of the same word in the same sentence of the same paragraph on the same page!!!!!!!
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 06:10 PM |
Camaro ls3 news...true or false? | Dark Knight | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 74 | 06-05-2008 05:29 PM |
"The car of the future may turn out to be no car at all." | Scotsman | General Automotive + Other Cars Discussion | 2 | 11-03-2007 12:22 AM |
Axial Vector Engine | Mr. Wyndham | General Automotive + Other Cars Discussion | 6 | 06-20-2007 04:00 PM |