05-07-2013, 03:15 PM | #1 |
Street Scene installed
I finally installed the Street Scene lower grill this morning. I had attempted to do this last week, but I backed out of it when I thought I needed an extra set of hands to help. Instead I bought 6 small, soft tip grips to hold the tabs in place while I put the screws in.
|
|
05-07-2013, 03:20 PM | #2 |
|
That looks really good
__________________
Jannetty Racing JRE Street Package
|
05-07-2013, 03:28 PM | #3 |
Thanks.
After I made the post, I noticed in the picture that the passenger duct looked like it was sticking out. It was. Seems that the 3M tape let go. Pushed it back on. Hopefully, it stays this time. |
|
05-07-2013, 07:29 PM | #4 |
Drives: 2011 Camaro SS/RS Join Date: Sep 2012
Location: Miami (Homestead) FL
Posts: 84
|
looks sweet
__________________
|
05-07-2013, 08:08 PM | #5 |
nice job
__________________
Mold Your Dreams into Reality
|
|
05-07-2013, 08:13 PM | #6 |
Mid-Florida Camaro Club
|
Looks great. Did you need to remove front fascia to install?
|
05-07-2013, 08:43 PM | #7 |
Yes you have to remove the front. It is really easy.
3 screws and 2 pushpins in each wheel well. 1 screw and 5 bolts behind each wheel well cover. 2 bolts and 6 push pins under the hood. 2 bolts under the front end. |
|
05-07-2013, 10:37 PM | #8 |
HT5 COTW 1/21/13
Drives: 2010 Camaro Inferno 2SS RS 6M Join Date: Apr 2011
Location: Pleasant Hill, Or
Posts: 2,486
|
That really looks great
|
05-07-2013, 11:41 PM | #9 |
Drives: 2012 1LS Camaro (Victory Red) Join Date: Sep 2012
Location: Long Island
Posts: 372
|
That's looks awesome with the heritage grill
|
05-08-2013, 05:24 AM | #10 |
Team LFX
Drives: Fast Join Date: Mar 2012
Location: TX
Posts: 621
|
|
05-08-2013, 07:47 AM | #11 |
I bought mine from Street Side Auto.
I did a search and found a $10 off coupon. Shipping was free. Got it for $204. Best deal I could find. |
|
05-08-2013, 08:22 AM | #12 | |
Drives: 2010 2SS RS M6 Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
|
Quote:
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
|
|
05-08-2013, 10:11 AM | #13 |
Looks really good with the GM splitter.
|
|
05-08-2013, 10:42 AM | #14 |
Drives: Varies Join Date: Dec 2009
Location: Costa Mesa, CA
Posts: 2,182
|
|
|
|
|
|