holy awesomeness! 820rwhp Whipple 2.9 charged 2013 1LE - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ayousef · 07-24-2013, 09:01 PM

Well, as soon as I started my crazy build a close friend of mine got a little too excited and wanted something of his own, and voila this 2013 Camaro 1LE was born.

Mike from New Era Performance ordered this vehicle with all the specifications my friend wanted and drove it to the shop straight of the factory floor, infact it has less than 50miles on it in total with all the dyno tuning etc...

Made 820rwhp ant 783rwtq with 93 octane + meth. Were expecting it to make about 850rwhp in Dubai in good weather especially since boost should theoretically go up at sea level vs Rochester being at some 700feet elevation or so.

Package is:

- 2013 White Camaro 1LE fully loaded
- Whipple 2.9 black with carbon shaft cover at 13psi.
- LME built 9.5:1 CR 416ci LS3 block with all the nice forged goodies.
- Mast LS3 heads
- Custom NEP stealth cam
- NW102 throttle body
- RPM transmissions fully built TR6060
- Mantic Dual clutch
- DSS 9" conversion with 3.42 gears
- Aeromotive fuel system with billet pump speed controller
- ID850 injectors
- Alky control dual nozzle meth system with hardlined meth tubes
- Mickey Thompson street radial II rear tires and Toyo Proxes r888 fronts
- Pfadt ZL-spec antisway bars and drop springs
- American racing headers, Swaintech coated.
- Custom intercooler reservoir tank
- Custom clutch fluid reservoir (separated from brake reservoir)
- 8rib Innovators west pulleys
- Racing bucket seats (forgot brand? lol)
- Im sure I forgot more than a few things

Im gonna go call Mike to upload a few things videos, images whatever. Is this awesome or what?

Supercharged SS · 07-24-2013, 09:08 PM

Eh. No 4.0 Whipple so I don't care!!

old motorhead · 07-24-2013, 09:18 PM

VERY nice. How much boost is it running? Are you going to upgrade the t'body?

ayousef · 07-24-2013, 09:20 PM

Quote:

Originally Posted by Supercharged SS

Eh. No 4.0 Whipple so I don't care!!

I was gonna reply in the other thread but I forgot, im inviting you to drive the 4.0 ZL1 if you ever pass by Dubai

mike@newera · 07-24-2013, 09:28 PM

Thanks for the mention! This car is a purpose built street car, to make a lot of power reliably. While it is mostly finished, we still have a few cosmetic things that we are still waiting for to come in. I uploaded a few pics for everyone to check out on this build below.

mike@newera · 07-24-2013, 09:29 PM

It's 13 psi, and it has a NW 102mm throttle body.

2010 SSRS · 07-24-2013, 09:38 PM

I love it

Supercharged SS · 07-24-2013, 09:41 PM

Quote:

Originally Posted by ayousef

I was gonna reply in the other thread but I forgot, im inviting you to drive the 4.0 ZL1 if you ever pass by Dubai

Ill be swinging by Dubai right after I get back from the moon!! Keep it full of fuel for me!!

10aSSee D · 07-25-2013, 08:29 AM

Wow!! What pistons did you use?

mike@newera · 07-25-2013, 09:19 AM

They are custom Wiseco pistons with gas ports.

Dznts · 07-25-2013, 10:10 AM

Ivan @ Southwest Speed · 07-25-2013, 11:32 AM

I can dig it. Well done!

epstein · 07-25-2013, 11:49 AM

Very Nice build .

Birm · 07-25-2013, 11:49 AM

Sick

07-24-2013, 09:38 PM	#7
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	I love it __________________ Jannetty Racing JRE Street Package

07-25-2013, 08:29 AM	#9
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Wow!! What pistons did you use? __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

07-25-2013, 10:10 AM	#11
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	__________________

07-24-2013, 09:08 PM	#2
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	Eh. No 4.0 Whipple so I don't care!!

07-24-2013, 09:18 PM	#3
old motorhead Drives: Maggie blown LS3 vette Join Date: Aug 2009 Location: SE TX Posts: 1,490	VERY nice. How much boost is it running? Are you going to upgrade the t'body?

07-24-2013, 09:28 PM	#5
mike@newera Drives: 2016 Camaro SS Join Date: Jan 2009 Location: Rochester, NY Posts: 529	Thanks for the mention! This car is a purpose built street car, to make a lot of power reliably. While it is mostly finished, we still have a few cosmetic things that we are still waiting for to come in. I uploaded a few pics for everyone to check out on this build below.

07-24-2013, 09:29 PM	#6
mike@newera Drives: 2016 Camaro SS Join Date: Jan 2009 Location: Rochester, NY Posts: 529	It's 13 psi, and it has a NW 102mm throttle body.

07-25-2013, 09:19 AM	#10
mike@newera Drives: 2016 Camaro SS Join Date: Jan 2009 Location: Rochester, NY Posts: 529	They are custom Wiseco pistons with gas ports.

07-25-2013, 11:32 AM	#12
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	I can dig it. Well done!

07-25-2013, 11:49 AM	#13
epstein Account Suspended Drives: SS/RS Join Date: May 2010 Location: Transplanted from NYC..(ret. NYPD).Now in CT Posts: 904	Very Nice build .

07-25-2013, 11:49 AM	#14
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	Sick