02-03-2010, 04:17 PM | #1 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
ADM Performance Stage Two Build...
Less than a week after completing the extreme 910RWHP and 1000RWTQ build, the ADM team was tasked with another build. This time, we were given three days to complete the build... and we did it in two and a half! This build included an ADM Stage Two Camshaft, 1 7/8" American Racing Headers, the ADM Performance Street Cold Air Intake, and a Magnuson Supercharger.
The final result was an incredible 629rwhp and 575lbs-ft. of torque. |
02-03-2010, 05:22 PM | #2 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Awesome numbers guys! How about a walk behind the car so we can here the cam at idle. Also how much boost?
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
02-03-2010, 05:32 PM | #3 |
NOICE!!! ™
|
Looking Good
__________________
|
02-03-2010, 06:10 PM | #4 |
Drives: everyone crazy... Join Date: May 2009
Location: SW Florida
Posts: 2,109
|
Is this on 91 or 93 Octane? BTW, does TX have 93 or 91 Octane?
Andy, you guys do a superb job! You're # 1 on my list! |
02-03-2010, 09:56 PM | #5 |
Drives: 2002 Camaro SS Join Date: Jul 2009
Location: Quitman, LA
Posts: 609
|
Nice results, very impressive numbers.
__________________
2015 1LE - CAI intake, TSP longtubes,
NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms |
02-03-2010, 10:00 PM | #6 |
|
The car is on a trailer back to TN right now. Owner should be posting some pics/video or sending to ADM to post soon. No race fuel was harmed in the making of this car, the car was running 93 octane. We're lucky in TX and can buy good gas almost anywhere.
__________________
|
02-04-2010, 12:29 AM | #7 |
Drives: 2010 2SS IMB LS3/M6 Join Date: Jul 2009
Location: Reno, NV
Posts: 137
|
Wow, very impressive for 93 octane. Curious as to boost numbers? Stock longblock other than cam?
__________________
2010 2SS LS3/M6 Imperial Blue
650HP LPE Package - 576.3 RWHP, 91-tune 4.10 Richmond Gears ZR1 Clutch / LPE Flywheel LPE IBM Coil Covers Thorley Shorty Headers Borla 140280 Cat-back ADM Boost Gauge MTI Shifter Hotchkis Sway Bars LPE Floor Mats SRP Heel-Toe Pedals |
02-04-2010, 06:07 AM | #8 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Stock Block,Stock rods,stock pistons.
It does have a ZR1 Clutch assembly MTI short throw shifter and Magnaflow 3" Exhaust with Highflow cats. It was running with Chevron(Customer approved,ADM Recommended) 93 octane fuel. It makes 7.5 psi . It was a CARBON COPY Build to SW's car that we did back in October 2009. Andy |
02-04-2010, 10:54 AM | #9 |
Okie doke
|
Very nice results Andy!!
Crowley
__________________
|
02-04-2010, 10:22 PM | #10 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
02-04-2010, 10:31 PM | #11 |
Drives: 2ssrs Join Date: Jul 2009
Location: virginia
Posts: 16
|
I`ll try to get some pictures tomorrow and a vid. I got back home at 6:30 this morning and I`ve been running ever since. This the first time I`ve got to sit down. I will say this that all you guys that want to get there car done but are somewhat worried about it being done right or is it worth it? My answer is THIS CAR WILL RUN and it looks like it just rolled out of the dealership ,It was worth every cent. I`m very happy with it. I could have took the car anywhere I`m glad I took it to Andy at ADM. Have you ever watched somebody thats real good at what they do and gets a tremendous amount of things done and done right in a short amount of time thats Andy. He knows these cars. It`s like these other guys have already said, nobody else will work on my car,You can trust him.
Last edited by It`s got to be fast; 02-04-2010 at 10:47 PM. |
02-05-2010, 06:21 AM | #12 | |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Glad you made it home safely
Quote:
Thanks for the kind words and I am glad you made it back safely. Not many of my customers get to see first hand what I do....You however saw 2 days of hard work and perfection at it's best. Bill brought his car to ADM to get it done right,No smoke..No mirrors... Thanks again Andy |
|
02-05-2010, 08:44 AM | #13 |
|
+1.
__________________
|
02-05-2010, 11:53 AM | #14 |
Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009
Location: Massachusetts
Posts: 3,100
|
Very nice job AGAIN Andy. You guys are doing some great work out of that shop.
Very nice for 7.5 psi and over 630 ponies to the rear wheels. So, I'm guessing about, 740ish at the crank? |
|
|
Tags |
2010 camaro, adm performance, cold air intake, stage two camshaft |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hawk Performance Brake Pad "Updated" | KILLER74Z28 | Suspension / Brakes / Chassis | 34 | 05-04-2016 11:11 AM |
Mustangs................ | vontivonti | 5th Gen Camaro SS LS LT General Discussions | 4052 | 12-21-2009 10:42 PM |
ADM Performance Stage 1 Cam/Downpipes package | ADM PERFORMANCE | V8 Bolt-Ons & Tunes | 19 | 09-21-2009 08:08 PM |
ADM Performance CAI Installed and Rocking! | Number_9 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 3 | 09-13-2009 08:50 AM |
Roush Stage 3 Blackjack Mustang | TAG UR IT | General Automotive + Other Cars Discussion | 16 | 05-21-2007 07:32 PM |