01-25-2013, 09:31 AM | #1 |
502 RWHP N/A
|
Northstar drag way 2013
Alright folks track opens feb 21 which is a Thursday to start the year with rice killer then the following Thursday feb 28 will be a test and tune
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
01-27-2013, 08:30 PM | #2 |
Drives: 2016 Hyper Metallic Blue SS Join Date: Jun 2011
Location: Abilene TX
Posts: 588
|
You should just meet up with us at Dallas Raceway in crandall on the 9th lol
__________________
|
01-27-2013, 09:03 PM | #3 |
502 RWHP N/A
|
crandall hmmm 75 miles one way......have to check schedule to see if im off that saturday i only get one off a month
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
01-27-2013, 11:27 PM | #4 |
Drives: 2016 Hyper Metallic Blue SS Join Date: Jun 2011
Location: Abilene TX
Posts: 588
|
Gross.....that would suck to only have one sat off a month. If it makes you feel any better se are traveling from Abilene lol.
__________________
|
01-28-2013, 04:53 PM | #5 |
Drives: 2012 Grocery Getter Join Date: Jan 2013
Location: NTX
Posts: 32
|
Planning on going out there to test out the new ride! Shooting for Friday March 1st for the TX Thaw..
|
01-30-2013, 09:37 AM | #6 |
Drives: 2020 Summit White LT1 M6 Join Date: Sep 2011
Location: Dallas, TX
Posts: 1,033
|
Count me in! maybe for both Northstar AND Crandall!
__________________
2020 Summit White LT1 M6
|
02-02-2013, 11:46 AM | #7 |
502 RWHP N/A
|
Yeah the only Saturday I'm off is feb 23, northstar has a TNT from 12-6 every Saturday this month
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
02-08-2013, 03:51 PM | #8 |
502 RWHP N/A
|
Track dates have changed TNT every Saturday this month TNT will resume Thursday march 6th from there out along with rice killer starting march 14th
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
02-15-2013, 08:09 AM | #9 |
502 RWHP N/A
|
Going to northstar this Sunday gates open at noon till 6
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
02-17-2013, 04:57 PM | #10 |
502 RWHP N/A
|
Well after 15 passes either broke my gears and or axle
|
02-17-2013, 05:57 PM | #11 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Damn. How many total passes are on the car before the rear end broke today?
|
02-17-2013, 06:11 PM | #12 |
502 RWHP N/A
|
About 220 with 3:45 gears I was practicing stalling with my stock converter and they had just prep the track launched hit 2nd then ka kaklunk then tried pushing pedal down felt like I was in neutral ran 11.4 @42 that pass lol now waiting in parking lot to get towed to adm
|
02-17-2013, 06:21 PM | #13 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
So it broke on the 1-2 shift?
Time for the ZL1 rear end and a higher stall converter. |
02-17-2013, 06:23 PM | #14 |
502 RWHP N/A
|
Stall was coming along with tires and rims now may be better axles and new gears
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|