Official 1/4 Mile (V8) 2010+ Camaro Fast List

[Sales @ ECS]

Tires used on the pass: Mickey Thompson Drag Radial Street II Tires 305/45/18
Performance Mods (if any): ECS Base Supercharger Kit, ECS Big Blower Cam Package, ECS Alky Control Meth Kit, DSS 9" Conversion with 4" Driveshaft, Pfadt Coilovers/Rear Suspension/Drag Bar
Category submitted for Power Adders


2011 Camaro SS



- STOCK BOTTOM END
- ECS BASE Supercharger Kit - Novi 1500 with 8-Rib Direct Drive
- ECS Big Blower Cam Package
- ECS Alky Control Centri-Kit
- ARH 2" Longtube Headers, High-Flow Catted X-Pipe with Drone-Free Street 2.5" Axle Back System
- DSS 9" Conversion IRS Kit
- DSS 4" Custom Aluminum Driveshaft
- Pfadt Street Coilovers with Drag Springs
- Pfadt Rear Drag Bar
- Pfadt Rear Suspension Bushings; Trailing Arms; Toe Rods
- Stock 20" Fronts
- C6Z 18" Rears with 305/45/18 Mickey Thompson Street II Drag Radials
- ECS Th350 3-Speed Automatic

[CynAgain]

[jhormilla]

Hi SGOS252382, we would like our car's info updated on the list in this section. "Internal Engine Mods plus Bolt-Ons (eg. bolt-ons plus heads and/or cam), Stock Displacement" Best ET is 11.058 @ 128.11 mph

Here is a list of mods on it.

2011 M6 LS3
6.2L 100% stock shortblock
Kooks 2” long tube headers
Kooks off-road x-pipe
Cartek ported and machined (in house) 4X LS3 heads
Cartek custom grind camshaft
Cartek ported 90MM throttle body
Cartek ported 102MM FAST intake
Cartek custom tuning
Vararam CAI
Under-drive pulley
17" Bogart wheels, MT ET Streets
3800+ Race weight
Monster clutch
Cartek 4.10 gears



http://www.youtube.com/watch?feature...&v=FAmKxXGoqsg

[acatlover13]

Whew! Finally made it back into the top 20! Amazing what a good tune and a few bolt ons can do for these cars!!!

L99
ADM Race Cold Air
Dynatech Headers & Hi-flows
Solo Mach-x Cat-back exhaust
Precision Industries 2800 Stall Convertor
Dyno tune
Nitto 555Rs
Vmax PTB


R/T: .237 (Ugh....but wasn't really trying for that...concerned about other things...LOL)
60 ft: 1.737
330 ft: 5.112
1/8th mi: 7.916
MPH: 87.90
1000 ft: 10.323
1/4 mi: 12.360
MPH: 110.71

[69camaro6speed]

Tires used on the pass:dr
Performance Mods (if any):dynatech headers,magnaflow exhaust,adm cai
Category submitted for:Bolt-Ons without Internal Engine Modification
R/T...........0.129
60'.............1.814
330'...........5.220
660'...........7.988
660’ mph...89.12
1000'..........10.382
1320'..........12.405
1320’ mph…111.48
Name of the track:edgewater
Date of pass:11/19/11
Weather conditions: (include Density Altitude, if known):671da from drag times,57 degs from display
L99a6

[redirish]

Car/Engine: 2010 SS/RS LS3
Bone Stock
R/T .463
60' 2.042
330 5.522
1/8 8.407
MPH 85.27
1000 10.862
1/4 12.94
MPH 107.61
Weather Conditions: Cloudy Low Humdity Tempt around 50
Had two complete runs from start to finish.
20111121194802434 (1).pdf

[RX SS RACERX]

Need seat time and MORE POWER!!! I'm car T10 in right lane. Sorry,new to this-Power Adders plus internal mods on stock bottom. 53F with DA of -327 according to dragTimes web site. Mods in my sig.

[RPM Transmissions]

Tires used on the pass:275/60/15 M&H Drag Radials
Performance Mods (if any): 427 ci LS7 Titanium rod/Mahle pistons, WCCH ported LS7 heads, Custom Comp Cam, Wilson Billet Bank Intake,Pro-Flow 200HP Nitrous Fogger, NW 102 TB, Meizere EWP, ATI underdrive, 2" AR headers, 3" Magnaflow exhaust, RPM Transmissions Level 7 4L60E, Coan converter, Custom Moser aluminum 9", DSS axles, DSS driveshaft, Pfadt Drag shocks and mounts, Custom rear control arms, Spohn front control arms, Xtreme Innovations front cradle, 10 pt chromoly cage, 15" Weld RTS's, Champion beadlocks, 17" Alumistars, LPE 2-step, Tuned by Phil Hoefler.... etc...
Category submitted for:
Power Adders

R/T......... .222
60'............. 1.543
330'........... 4.344
660'........... 6.524
660’ mph... 114.48
1000'.......... 8.379
1320'.......... 9.953
1320’ mph… 143.38
Name of the track: Edgewater Dragway, Cincinnati,OH.
Date of pass:11/19/11
Weather conditions: (include Density Altitude, if known): 60 degrees





http://www.youtube.com/watch?feature...&v=0YAQc5x3_7M

[SGOS252382]

Originally Posted by RPM Transmissions

Tires used on the pass:275/60/15 M&H Drag Radials
Performance Mods (if any): 427 ci LS7 Titanium rod/Mahle pistons, WCCH ported LS7 heads, Custom Comp Cam, Wilson Billet Bank Intake,Pro-Flow 200HP Nitrous Fogger, NW 102 TB, Meizere EWP, ATI underdrive, 2" AR headers, 3" Magnaflow exhaust, RPM Transmissions Level 7 4L60E, Coan converter, Custom Moser aluminum 9", DSS axles, DSS driveshaft, Pfadt Drag shocks and mounts, Custom rear control arms, Spohn front control arms, Xtreme Innovations front cradle, 10 pt chromoly cage, 15" Weld RTS's, Champion beadlocks, 17" Alumistars, LPE 2-step, Tuned by Phil Hoefler.... etc...
Category submitted for:
Power Adders

R/T......... .222
60'............. 1.543
330'........... 4.344
660'........... 6.524
660’ mph... 114.48
1000'.......... 8.379
1320'.......... 9.953
1320’ mph… 143.38
Name of the track: Edgewater Dragway, Cincinnati,OH.
Date of pass:11/19/11
Weather conditions: (include Density Altitude, if known): 60 degrees





http://www.youtube.com/watch?feature...&v=0YAQc5x3_7M

Pretty nice 1st post.

[RPM Transmissions]

Tires used on the pass:275/60/15 M&H Drag Radials
Performance Mods (if any): 427 ci LS7 Titanium rod/Mahle pistons, WCCH ported LS7 heads, Custom Comp Cam, Wilson Billet Bank Intake,Pro-Flow 250HP Nitrous Fogger, NW 102 TB, Meizere EWP, ATI underdrive, 2" AR headers, 3" Magnaflow exhaust, RPM Transmissions Level 7 4L60E, Coan converter, Custom Moser aluminum 9", DSS axles, DSS driveshaft, Pfadt Drag shocks and mounts, Custom rear control arms, Spohn front control arms, Xtreme Innovations front cradle, 10 pt chromoly cage, 15" Weld RTS's, Champion beadlocks, 17" Alumistars, LPE 2-step, Tuned by Phil Hoefler.... etc...
Category submitted for:
Power Adders

R/T......... .763
60'............. 1.526
330'........... 4.156
660'........... 6.261
660’ mph... 117.25
1000'.......... 8.076
1320'.......... 9.618
1320’ mph… 145.69
Name of the track: No Limit Dragway, Morocco,IN.
Date of pass:11/25/11
Weather conditions: (include Density Altitude, if known): 57 degrees

[94guy]

Tires used on the pass:M&H drag radials
Performance Mods (if any):whipple,JRE tune, JRE2600stall, LS9cam, headers, A6
Category submitted for:Power adder
R/T............639
60'.............1.59
330'...........4.46
660'...........6.81
660’ mph...103.74
1000'..........8.85
1320'..........10.56
1320’ mph…132.18
Name of the track:No problem raceway
Date of pass:11/30/2011
Weather conditions: 50

[GretchenGotGrowl]

Originally Posted by 94guy

Tires used on the pass:M&H drag radials
Performance Mods (if any):whipple,JRE tune, JRE2600stall, LS9cam, headers, A6
Category submitted for:Power adder
R/T............639
60'.............1.59
330'...........4.46
660'...........6.81
660’ mph...103.74
1000'..........8.85
1320'..........10.56
1320’ mph…132.18
Name of the track:No problem raceway
Date of pass:11/30/2011
Weather conditions: 50

Very nice!

[lazerlemonta]

Took the car to Mason Dixon for its first trip down the track. After getting used to it i managed several 13.0s a 12.99@110.99 and a 12.985@110.48 I was pleased for my first time driving in 5 or so years. still think it has more in it.
2012 1SS LS3 Submission for top 20 list
Tires used on the pass:P Zero
Performance Mods (if any):None
Category submitted for:Bone Stock
R/T...........163
60'.............2.097
330'...........5.641
660'...........8.508
660’ mph...85.42
1000'..........10.945
1320'..........12.985
1320’ mph…110.48
Name of the track:Mason Dixon
Date of pass:11/19/2011
Weather conditions: (include Density Altitude, if known):600-700

[CosmicBrut]

Id like to add my best time to the list to date. Ive got about a dozen runs on the car(mostly low 11.7s high 11.6s) but this is the best ive been able to get it to hook to date.

Tires used on the pass:Nitto Nt05r 315/35/20's on stock 20x9's widened to 10.5
Performance Mods (if any):tsp 229/236 cam tsp ported heads,DOD and VVT delete,Fast 102 intake, Vmax ptb,kooks headers and complete system, CAI cold air, circle d 3200 stall with a built 6l80e..installed and tuned by ECS.
Category submitted for:Internal Engine Mods/stock displacement
R/T- .112
60'- 1.710
330'- 4.827
660'- 7.426
660’ mph- 94.81
1000'- 9.657
1320'- 11.537
1320’ mph- 119.46
Name of the track:Raceway Park, Old Bridge NJ
Date of pass:12/4/11
Weather conditions: (include Density Altitude, if known):50 degrees

The car weighed in at 4078 and im still having traction issues(I guess thats what i get trying to make a 20 inch drag radial work). I feel the car has a 1.6x in it if i can flat hook it off the line.