GM GFX Front Splitter - Used - with hardware - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

f5journal · 03-05-2013, 08:43 AM

SOLD

I have a used front splitter. This is removed from my car and already packed for shipping. This sale includes all mounting hardware, plus I have provided new rivets and the instructions and templates

There are a couple of very light cosmetic imperfections. TRUST ME, ONCE INSTALLED YOU WILL NOTICE NOTHING.

If you opt to paint this splitter, nothing will show. If you install it as-is...it will still look fine

The light imperfections include:

1) Scratches underneath - does not show
2) One deep scratch down low on the passenger side directly in front of the wheel

3) A very slight stress warble in the surface on the passenger side front where the deer actually hit the splitter. This only shows if you get on your knees and catch the glare correctly. I believe this deal will come out when the splitter is reinstalled. It is negligible.

I have also repaired two minor situations

1) The little fold up tab on the passenger corner(that one bolt goes thru) ripped off. I have riveted a thin piece of sheet metal to put this back in place. It is stronger than new. The tab hardly serves a purpose other that to align everything with the corner of the front bumper and does not show when installed - see pics

2) The was a crack in the passenger side plastic mounting strip that rivets to the bumper. I have glued this back. It is strong and does not show - see pictures

This unit is over $700 list and is $550 at GM Partshouse new not shipped to you, and does not appear to come with the mounting hardware.

Attached are pics of the car before removed and numerous pics of the unit ready to ship.

I am looking for $300 shipped to you.

Talk to me.....

f5journal · 03-05-2013, 08:45 AM

A couple more pics

The 2010 Sin · 03-05-2013, 09:53 AM

This should sell fast and be an easy paintable fix. :-)

f5journal · 03-05-2013, 10:03 AM

This is for SS only, not V6

f5journal · 03-05-2013, 10:09 AM

Here are a few more pics

f5journal · 03-05-2013, 10:20 AM

The prospective buyer also needs to add a 1-1/2 long piece of 3M body panel tape to each side at the very ends. This is right after (to the left of) the black rectangular bracket in the first picture. I did not provide this, as I did not have any at the time.

thebradinator · 03-05-2013, 11:14 AM

PM Sent

f5journal · 03-05-2013, 11:30 AM

SOLD

03-05-2013, 08:43 AM	#1
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	GM GFX Front Splitter - Used - with hardware SOLD I have a used front splitter. This is removed from my car and already packed for shipping. This sale includes all mounting hardware, plus I have provided new rivets and the instructions and templates There are a couple of very light cosmetic imperfections. TRUST ME, ONCE INSTALLED YOU WILL NOTICE NOTHING. If you opt to paint this splitter, nothing will show. If you install it as-is...it will still look fine The light imperfections include: 1) Scratches underneath - does not show 2) One deep scratch down low on the passenger side directly in front of the wheel 3) A very slight stress warble in the surface on the passenger side front where the deer actually hit the splitter. This only shows if you get on your knees and catch the glare correctly. I believe this deal will come out when the splitter is reinstalled. It is negligible. I have also repaired two minor situations 1) The little fold up tab on the passenger corner(that one bolt goes thru) ripped off. I have riveted a thin piece of sheet metal to put this back in place. It is stronger than new. The tab hardly serves a purpose other that to align everything with the corner of the front bumper and does not show when installed - see pics 2) The was a crack in the passenger side plastic mounting strip that rivets to the bumper. I have glued this back. It is strong and does not show - see pictures This unit is over $700 list and is $550 at GM Partshouse new not shipped to you, and does not appear to come with the mounting hardware. Attached are pics of the car before removed and numerous pics of the unit ready to ship. I am looking for $300 shipped to you. Talk to me..... Attached Images __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff Last edited by f5journal; 03-05-2013 at 11:30 AM.

03-05-2013, 08:45 AM	#2
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	A couple more pics Attached Images __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff

03-05-2013, 09:53 AM	#3
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	This should sell fast and be an easy paintable fix. :-) __________________

03-05-2013, 10:03 AM	#4
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	This is for SS only, not V6 __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff

03-05-2013, 10:09 AM	#5
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	Here are a few more pics Attached Images __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff

03-05-2013, 10:20 AM	#6
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	The prospective buyer also needs to add a 1-1/2 long piece of 3M body panel tape to each side at the very ends. This is right after (to the left of) the black rectangular bracket in the first picture. I did not provide this, as I did not have any at the time. __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff

03-05-2013, 11:14 AM	#7
thebradinator Drives: 2011 CGM Camaro V6 Join Date: Jul 2012 Location: Fort Worth Tx Posts: 30	PM Sent

03-05-2013, 11:30 AM	#8
f5journal Senior Camaro Fanatic Drives: 2011 SS/RS manual - White Join Date: Aug 2010 Location: aiken, sc Posts: 1,980	SOLD __________________ Former '68 and '69 Z/28 Owner...........Now sporting around in a 2011 RS/SS with........Kooks LT's and cats, JRE tune, CAI, scoop, ZL1 Bumper conversion, custom ZL-1 grille, halo harness, Painted silver stripes, GM GFX, black painted lower edge of skirts and rear bumper. MGW shifter.....and now a 3.91 1LE diff