Bad Decals - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

xRedsox · 05-29-2013, 09:47 AM

I recently bought 2 vinyls from iJDMtoy and when I tried to put them on my car, most of the letters would stick to the paper and not the peel-able surface that you put on the window. I would not be as mad as I am right now if I didn't pay more in shipping than the actual two decals.

xRedsox · 05-29-2013, 09:48 AM

Here is proof

zkdreads · 05-29-2013, 09:50 AM

what were the decals of?

Kelly@PCMofNC · 05-29-2013, 09:53 AM

Have you contacted the company to let them know there is a problem?

axis · 05-29-2013, 09:54 AM

Did you properly clean the surface and peel the paper off correctly? Not saying you didn't but it can be tricky, if you haven't done it before. You need to peel straight down or across, keeping the paper right against the surface as you peel it away and go very slowly. It's easy to show and hard to explain in a post, haha. If you have any doubts, i'm sure there's a youtube showing the steps.

xRedsox · 05-29-2013, 09:59 AM

Quote:

Originally Posted by axis

Did you properly clean the surface and peel the paper off correctly? Not saying you didn't but it can be tricky, if you haven't done it before. You need to peel straight down or across, keeping the paper right against the surface as you peel it away and go very slowly. It's easy to show and hard to explain in a post, haha. If you have any doubts, i'm sure there's a youtube showing the steps.

yeah I did that, but for some reason words would not come off the paper.

xRedsox · 05-29-2013, 09:59 AM

Quote:

Originally Posted by zkdreads

what were the decals of?

"Caution this vehicle is a TRANSFORMER"
and
"umadbro?"

axis · 05-29-2013, 10:01 AM

Quote:

Originally Posted by xRedsox

yeah I did that, but for some reason words would not come off the paper.

As said above, time to contact the company. Sometimes it just doesn't work right.

San2cci · 05-29-2013, 10:04 AM

If you use a razor blade (new) and peel each letter partially before installation it may work.

xRedsox · 05-29-2013, 10:06 AM

Quote:

Originally Posted by axis

As said above, time to contact the company. Sometimes it just doesn't work right.

I don't know why, its just the backing paper is like C uti n th icle a Tr f r

and umadbro is missing all of the dots.

vroomapunk · 05-29-2013, 10:10 AM

IJDMtoy doesnt seem to sell good products, their leds I bought werent that great. Cust service wasnt as good as V-Leds or AAC either (even though I dont really like AAC's products)

Kohdaa · 05-29-2013, 10:30 AM

IJDMtoy is a bed dealer when it comes to buying things from them, I bought LEDS from them and 3 out of 4 of them did not work. I contacted them and they wanted video proof so i did that, then they wanted me to send back the lights do i did that. Then i get an email saying that the package was torn or ripped open. Never got a refund or new lights.

GotGame55 · 05-29-2013, 10:50 AM

Quote:

Originally Posted by xRedsox

"Caution this vehicle is a TRANSFORMER"
and
"umadbro?"

Hey! "Umadbro?" Is mine. Lol I called it first.

zkdreads · 05-29-2013, 03:49 PM

well now we see why "Umadbro" didnt work lol

05-29-2013, 09:47 AM	#1
xRedsox Night Fury Drives: 2016 Golf R Join Date: Feb 2013 Location: Orlando Posts: 359 View My Garage	Bad Decals I recently bought 2 vinyls from iJDMtoy and when I tried to put them on my car, most of the letters would stick to the paper and not the peel-able surface that you put on the window. I would not be as mad as I am right now if I didn't pay more in shipping than the actual two decals. __________________ 2014 2LT RS A6 Mods: K&N Intake, Magnaflow Axleback, BMR Strut Tower Brace, VTC Throttle Controller, Tune.

05-29-2013, 09:48 AM	#2
xRedsox Night Fury Drives: 2016 Golf R Join Date: Feb 2013 Location: Orlando Posts: 359 View My Garage	Here is proof Attached Images __________________ 2014 2LT RS A6 Mods: K&N Intake, Magnaflow Axleback, BMR Strut Tower Brace, VTC Throttle Controller, Tune.

05-29-2013, 09:50 AM	#3
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	what were the decals of? __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

05-29-2013, 09:54 AM	#5
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	Did you properly clean the surface and peel the paper off correctly? Not saying you didn't but it can be tricky, if you haven't done it before. You need to peel straight down or across, keeping the paper right against the surface as you peel it away and go very slowly. It's easy to show and hard to explain in a post, haha. If you have any doubts, i'm sure there's a youtube showing the steps. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

05-29-2013, 10:10 AM	#11
vroomapunk [COTW 5/12/14] Drives: 2012 CRT NF Cammed 2SS/RS For Sale Join Date: Oct 2011 Location: NOLA Posts: 6,115 View My Garage	IJDMtoy doesnt seem to sell good products, their leds I bought werent that great. Cust service wasnt as good as V-Leds or AAC either (even though I dont really like AAC's products) __________________

05-29-2013, 09:53 AM	#4
Kelly@PCMofNC Drives: 2010 RS/SS Join Date: Dec 2010 Location: Mooresville, NC Posts: 959	Have you contacted the company to let them know there is a problem?

05-29-2013, 10:04 AM	#9
San2cci Drives: 2013 silver ice metallic ZL1 Join Date: Jan 2013 Location: Camden County, NJ Posts: 730 View My Garage	If you use a razor blade (new) and peel each letter partially before installation it may work.

05-29-2013, 10:30 AM	#12
Kohdaa Drives: 2011 Imperial Blue Metall RS Camaro Join Date: Nov 2012 Location: Clermont, Fl Posts: 440 View My Garage	IJDMtoy is a bed dealer when it comes to buying things from them, I bought LEDS from them and 3 out of 4 of them did not work. I contacted them and they wanted video proof so i did that, then they wanted me to send back the lights do i did that. Then i get an email saying that the package was torn or ripped open. Never got a refund or new lights. __________________

05-29-2013, 03:49 PM	#14
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	well now we see why "Umadbro" didnt work lol __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!