09-16-2012, 09:28 PM | #4761 |
Just Because!
Drives: 2010 SIM 2SSRS Join Date: Jun 2010
Location: San Jose, Ca
Posts: 6,909
|
Looks good! Are those the regular hex vents?
How was the cutting, other than the dremel death?
__________________
|
09-16-2012, 09:59 PM | #4762 | |
Boosted Moderator
|
Quote:
Yes they are the regular Hex Vents... If it looks like it will work, I'll be putting a second set wider out and a little bit further back, in the hopes of getting most of the air out from under the hood along the firewall... I'm not using the trays either... The biggest problem I had cutting them was the first blade I tried to use was too short, and it wasn't going through both layers of metal.... Other than that, no problem... The dremel death was kinda funny.... and man it made a big cloud of smoke...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
09-17-2012, 12:44 AM | #4763 |
www.Camaro5store.com
|
I know they aren't necessarily for looks for you, but daaaang. I love seeing them! NICE!
I might put a set of those on the "list" of wants. |
09-17-2012, 12:54 AM | #4764 | |
Boosted Moderator
|
Quote:
And you are correct, looks never entered the equation... this is strictly a performance addition, though I freely admit they look great... Steve at Hex Vents did a great job with these..
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
09-17-2012, 06:33 PM | #4765 | |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
__________________
|
|
09-17-2012, 06:57 PM | #4766 | |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
I agree! I want them cause the functional and great looking to boot.
__________________
|
|
09-17-2012, 07:00 PM | #4767 |
Boosted Moderator
|
They are nice B.
Installing them was interesting. I think I would have been better off if I had watched the video... but I did the man thing.... so it was a revelation at each step.... but there is nothing hard about it... Just make sure the blades you use are long enough to reach through both layers of metal... That was the biggest problem I had...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-18-2012, 08:56 PM | #4768 |
Boosted Moderator
|
So two packages arrived today at the shop while I was driving over here to Mississippi...
One was the fuel pump from Aeromotive... They replaced the entire motor and ungraded the inlet tube... The other box was the Weldon fuel pump and controller... Corey is already at work fabricating the items needed to mount this. He and Allan rewired the Lingenfelter dual pump system and put it back in the tank... Now we have to build a two gallon~~ fuel cell and install the Weldon on the outside of it and plumb it all together. Finish the parachute and the roll cage and we will be ready for the mile...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-18-2012, 08:59 PM | #4769 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
|
|
09-18-2012, 09:01 PM | #4770 |
CamaroFans.com
|
Really want to make the mile this fall. I can't believe we scheduled the Camaro Natl's that weekend... seems every weekend is full up from now til Christmas...
|
09-18-2012, 09:10 PM | #4771 | |
Boosted Moderator
|
Quote:
The Nats are a blast...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
09-18-2012, 09:12 PM | #4772 |
Retarded One-Legged Owl
Drives: 2010 Black Camaro 2SS Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,745
|
__________________
|
09-18-2012, 09:12 PM | #4773 |
CamaroFans.com
|
I'm sure you'll have a great pit crew. The mile is still on my bucket list.
But I still have to miss this one...:( |
09-18-2012, 09:43 PM | #4774 |
Booooosted.
|
I have no keyboard. Am using the onscreen one by clicking each letter.
SUCKS |
|
|
|
|