07-17-2013, 01:17 PM | #1 |
Drives: 2010 Camaro 2SS/RS Transformers Join Date: Jul 2013
Location: Florida
Posts: 47
|
2010 2SS/RS Lugnuts HELP PLEASE
I am trying to find a set of RED anodized lug nuts for my Camaro. No one seems to know where i can get them and not one of the ebay sellers i have asked can tell me if there item will fit or not. Please I have been looking for 2 months and I need help. I want the red anodized lugnuts closed ended (Not open ended racing) and I want them in Red / Inferno Orange / or Cobalt Red.
Thanks In Advanced Blaze |
07-17-2013, 02:43 PM | #2 |
Drives: 2013 Full Bolt on LFX M6 Join Date: Jan 2013
Location: Chicago,Illinois
Posts: 417
|
Sorry if this is a stupid answer, but just paint them for crying out loud!
__________________
|
07-17-2013, 03:03 PM | #3 |
Drives: 2011 RED Camaro Join Date: Sep 2011
Location: Walnut Creek, CA
Posts: 553
|
Or heres a bunch
http://www.ebay.com/sch/i.html?_odkw...d+lug&_sacat=0
__________________
|
07-17-2013, 07:36 PM | #4 |
Drives: 2010 Camaro 2SS/RS Transformers Join Date: Jul 2013
Location: Florida
Posts: 47
|
I dont want to paint them as they will chip, I am looking for someone who has actually purchased them, the ones on eBay never seem to be right. I thought the hex was 7/8??
|
07-17-2013, 08:03 PM | #5 |
Drives: 2010 Camaro 2SS/RS Transformers Join Date: Jul 2013
Location: Florida
Posts: 47
|
i just tried to put a 3/4 inch socket on there and it did not fit the stock lugs. so im still confused
|
07-17-2013, 08:25 PM | #6 |
|
The size of the outer hex nut does not matter! As long as it is a tapered lug nut with 14x1.5mm threads, it will work.
|
07-17-2013, 08:36 PM | #7 |
Drives: 2010 Camaro 2SS/RS Transformers Join Date: Jul 2013
Location: Florida
Posts: 47
|
|
07-17-2013, 08:52 PM | #8 |
This is nut's .. I could not resist
__________________
2011 Camaro 2SS
1969 Camaro BB 472 NOS 1997 Camaro Z28 |
|
07-17-2013, 09:04 PM | #9 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
|
07-17-2013, 09:40 PM | #10 |
|
Personally, I would use these: http://www.mackin-ind.com/portfolio/monster-lug/
They're available in Red, with a M14x1.50 thread size, and an optional closed end cap. Exactly what you're looking for....now you just gotta find a vendor that carries them. |
|
|
|
|