05-30-2015, 02:29 PM | #1 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Shifter, kooks LTs
Hey guys I have a few parts I’m Testing the waters for interest in off my 2010 LS3
1. OD cog (only OD) and belt for TVS2300 2. New Sealed MGW short shifter full assembly 3. Kooks 1 7/8” Long tubes with high flow cats, O2 bung extensions, O2 wire extensions Only reason for selling is I live in CA and having my car smogged. TVS and manifolds were put back to stock and I now just don’t feel the need to run 10psi nor want go through a header install again (or dropping a stock manifold on my face but that’s another story). MGW is actually sealed, never got around to installing and sitting in the box; was never touched except for photo. I don’t know exact mileage but to give you an idea of how NEW everything else is: I bought the car with 27k completely stock, I gradually modded myself and car is literally only a weekend/show car (sadly, I know). Car has never seen rain. The car sits now with a babied 29,300. The OD COG and LT’s probably have less than 1000-1500 miles on them. • For anyone with the 1:1 rear cogs, this is a perfect upgrade for more boost/whine. To clarify, I am selling only the 1 OD cog and the corresponding belt needed (your other cog stays the same). I want $210 and I’ll ship. I think it’s more than fair price since this is basically 2/3 of the kit needed which new is $400. • The MGW I want the $350 (Since it is as new as the day it was ordered and still sealed) but again I’ll ship. You basically save the ship/tax portion of a new order. https://www.mgwshifters.com/shifters/camaros/82 • Now the Long tubes I want to sell local NorCal/Bay Area if anything since I’m not sure how I would even go about shipping and if they don’t sell, they will probably end up back on the car anyways sometime in summer. I’ll let go $1000 for everything (Kooks Stainless 1 7/8” Long tubes with kooks high flow cats (3”-2.5”, I did have mated to an x pipe sounds crazy), O2 bung extensions, O2 wire extensions) since this setup would cost you on average shipped $1400 if you were to order today. Will not part out cats. If you roam the forums looking for steals giveaways and the $400 off isn't enough for you please don't comment. You are more than welcome to find some 400 OBX or 600-800 Stainless with no cat, extended bung nor extensions. You get what you pay for. I will post these locally on craigslist. Try to get some photos up later when off work and check on here at least once daily. No trades, prices firm, PayPal. Thanks for looking at this long ass post |
06-01-2015, 10:56 PM | #2 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Here are the LTs
|
06-01-2015, 10:57 PM | #3 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Kooooooks
|
06-01-2015, 10:58 PM | #4 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Spotless high flow kooks cats
|
06-05-2015, 10:46 PM | #5 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Another pic
|
06-08-2015, 09:42 PM | #6 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Monday Bump
|
06-12-2015, 02:19 PM | #7 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Headers off market. MGW and Cogs still available.
|
06-12-2015, 09:37 PM | #8 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Cog sold too.
|
|
|
|
|