Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 11-29-2014, 03:37 PM   #1
Nightmare2012
come find out;)
 
Drives: stockish 2012 camaro ss
Join Date: Oct 2012
Location: speed county
Posts: 2,166
Help me troubleshoot

So I took my camaro SS to work this past week (2 hour drive one way) and on the way over there everything went smoothly. Parked it for the week and used my dually that was already over there. On the way back everything was going great for about 1.5 hours of the trip home, but the last half hour my car started jerking and bucking really bad and when you even pressed the gas pedal the car felt like if it was in limp mode, so I baby it all the way home. I got home and figured it was misfiring so I changed out my spark plugs/wires and my o2 sensors. I also realized that my catch can was disconnected from my intake manifold so I reconnected everything nice and snug, started it up and it still has a rough idle and it still feels sluggish. I'm about to do a start up and log it to see if that shines a light at anything any suggestions on what it could be? Thanks for the help.
Nightmare2012 is offline   Reply With Quote
Old 11-29-2014, 04:46 PM   #2
KGL35
 
KGL35's Avatar
 
Drives: 2011 RS/SS
Join Date: May 2014
Location: St. Albert, Alberta
Posts: 108
cats may have collapsed
KGL35 is offline   Reply With Quote
Old 11-29-2014, 04:48 PM   #3
Nightmare2012
come find out;)
 
Drives: stockish 2012 camaro ss
Join Date: Oct 2012
Location: speed county
Posts: 2,166
Let me post up my mods H/C/I/E no cats and downstream o2s deleted.
Nightmare2012 is offline   Reply With Quote
Old 11-29-2014, 11:41 PM   #4
Nightmare2012
come find out;)
 
Drives: stockish 2012 camaro ss
Join Date: Oct 2012
Location: speed county
Posts: 2,166
Just as a update found the fix ground wire had come into contact with header and melted off used same gauge wire to solder together and fixed the issue.
Nightmare2012 is offline   Reply With Quote
Old 11-30-2014, 01:19 AM   #5
62nalide


 
62nalide's Avatar
 
Drives: 2013 SS
Join Date: May 2013
Location: DFW
Posts: 4,102
Glad you fixed it bro!
62nalide is offline   Reply With Quote
Old 11-30-2014, 01:47 AM   #6
Todd in Vancouver

 
Todd in Vancouver's Avatar
 
Drives: 2014 ZL1
Join Date: Oct 2013
Location: Vancouver, BC
Posts: 1,538
Glad you were able to fix it.

Just a note to anyone who reads this for reference. When dealing with electronics in any of the newer cars I always advise my guys in my auto repair shops to first check and clean all grounds before you spend your time and money chasing issues. Its amazing how many cars we fix with this simple process when trouble shooting vehicles.
__________________
Todd in Vancouver
'14 ZL1 Camaro
'67 Camaro SS Pro-tour in process

How hard can it be...
Check out my other build http://www.pro-touring.com/threads/9...ject-Obsession


Todd in Vancouver is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.