1SS guys, adding gauges

[The Stig]

Originally Posted by cornerspeed92

I got my harness today,has anyone heard an update about Tara's issue?

Talked to Ofer today, he's trying to get more cars to test to see if anyone else has this issue - because so far she's the only one who's had this problem.

[cornerspeed92]

I just got off the phone from him,and i am going to work on this tomorrow.He said for me to call him if there are any issues.It looks as we might still have an issue,cause apparently, as we know the 1LE's are a little different in the wiring,but we'll see,and of course i will let you know.

[cornerspeed92]

How do i remove the sill plate,and kick panel?i went to DIY typed in search,but nothing came up.

[right to travel]

trim tool. most of it comes off pretty easy.

[2SSRS@Gen5diy]

Originally Posted by cornerspeed92

How do i remove the sill plate,and kick panel?i went to DIY typed in search,but nothing came up.

Go to the bottom and pull up, there are 6 snap in clips on top 2 aligning pegs on top and 2 taps on the bottom that over lap the side trim.

[2SSRS@Gen5diy]

Originally Posted by Tara Martin

No updates yet. Exchanged a couple of emails with Ofer. I'll have time tomorrow to open it up again and get Ofer on the phone at the same time. The gauges work great! The dome light just doesn't work right and the passenger airbag light stays on.

CS92, please post how yours comes out!

Tara

if your off call me and lets see, i made this with only a LS car to test, we did that with the prototype harness then last Sunday with the same harness as you got, also sent a HUD based on this harness and it worked as well, no one had any thing bad go on with there cars, there car had 5 wires in the 4 pack connecter too, dont want to say how its done but have to see whats up.

[cornerspeed92]

Thanks guys

[Tara Martin]

Originally Posted by cornerspeed92

How do i remove the sill plate,and kick panel?i went to DIY typed in search,but nothing came up.

Pretty easy; I just use my fingers now and haven't broken a nail yet. I even took it apart with Ofer on my phone and in my ear!

[Tara Martin]

Originally Posted by 2SSRS

if your off call me and lets see, i made this with only a LS car to test, we did that with the prototype harness then last Sunday with the same harness as you got, also sent a HUD based on this harness and it worked as well, no one had any thing bad go on with there cars, there car had 5 wires in the 4 pack connecter too, dont want to say how its done but have to see whats up.

I just got off the phone with Ofer. He's in analyse mode now. I'm going to ship my harness back to him, because he's probably already figured out what the issue is. My car went back to normal when I removed the harness.

Now my gauges are just cosmetic until he sends it back.

I'm kidding though; all is good and Ofer is a great troubleshooter. It's better to get it right and then his harness will be bulletproof!

CS92, is yours working?

Tara

PS...Ofer, did I add enough drama?

[cornerspeed92]

Well i just got home,and wanted to check here before i started.I just called Ofer to see if i should even waste my time trying to hook this thing up,since you just sent yours back. It appears we might have an issue with our 1LE's.Im waiting for him to call me back.

[Tara Martin]

Originally Posted by cornerspeed92

Well i just got home,and wanted to check here before i started.I just called Ofer to see if i should even waste my time trying to hook this thing up,since you just sent yours back. It appears we might have an issue with our 1LE's.Im waiting for him to call me back.

I got my harness in the mail back to Ofer, so hopefully late next week I can reassemble mine.

Good luck with yours!

Tara

[cornerspeed92]

Tara,how long after you got your gauges hooked up did it take til you noticed the air bag light?

[cornerspeed92]

.....Ok finally,i have my gauges,and all is well, they work.Just took her out for a little shake down.Ofer thanks your one smart dude,and no worries Tara he will have you back up and running in no time.

[Tara Martin]

Originally Posted by cornerspeed92

.....Ok finally,i have my gauges,and all is well, they work.Just took her out for a little shake down.Ofer thanks your one smart dude,and no worries Tara he will have you back up and running in no time.

Excellent! I trust in Ofer; he'll get it fixed up!


Tara