V8 Camaro Aftermarket Exhaust Video Clips Compilation - Page 39 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wbdinger · 12-03-2016, 02:17 PM

Quote:

Originally Posted by MarioSS

Aaron_W actually i did watch your video earlier, and loved it!

But do you know which GMPP exhaust you have? As I think there are two versions.
Is it 92206992

Sent from my ONEPLUS A3000 using Tapatalk

I have the 92206992 which are oval in shape w/ARH 17/8 w hf cats and it sounds very simular, also a little drone cruising in 6th at 70-80mph. His in the video look round 92231570, but hard to tell inthe video. If you want to see the bow tie on the tips cut the mid pipe about 1/2- 3/4 " closer to the stock mufflers than the instructions say. Sorry no sound clip and is now stored for the winter.

MarioSS · 12-03-2016, 03:09 PM

Quote:

Originally Posted by wbdinger

I have the 92206992 which are oval in shape w/ARH 17/8 w hf cats and it sounds very simular, also a little drone cruising in 6th at 70-80mph. His in the video look round 92231570, but hard to tell inthe video. If you want to see the bow tie on the tips cut the mid pipe about 1/2- 3/4 " closer to the stock mufflers than the instructions say. Sorry no sound clip and is now stored for the winter.

Thanks brother. I'm leaning towards the 92206992 as i want to have the least rasp possible while at the same time not drive the neighbors nuts

Sent from my ONEPLUS A3000 using Tapatalk

Aaron_W · 12-03-2016, 03:54 PM

I have the round tips, not oval.

MarioSS · 12-03-2016, 04:47 PM

Quote:

Originally Posted by Aaron_W

I have the round tips, not oval.

He meant the actual exhaust not the tips

Sent from my ONEPLUS A3000 using Tapatalk

Aaron_W · 12-03-2016, 04:49 PM

Quote:

Originally Posted by MarioSS

He meant the actual exhaust not the tips

Sent from my ONEPLUS A3000 using Tapatalk

Oh if you're referring to the mufflers, they're round as well.

wbdinger · 12-03-2016, 05:03 PM

Yes talking about muffler shape not the tips lol. So Aaron you have the 92231570 mufflers

15LS3 · 12-16-2016, 02:53 PM

Anyone with the GM axle back system with a resonator delete? trying to decide weather I should sell the axle back for a NPP set up .

MarioSS · 12-16-2016, 04:21 PM

Going to install mine in 3 days with stock H pipe but with catless LTH

Sent from my ONEPLUS A3000 using Tapatalk

FKNGRSY · 01-23-2017, 05:55 PM

Kooks 1 7/8" headers, catless, NPP, fuse pulled.

AV8RLEO · 01-24-2017, 11:39 AM

Hey all.... forum newbie and newbie Camaro owner here....

2012 SS2-RS Convertible, LS3 with a 6 speed M/T...

What are the convertible guys doing for exhaust? Tried using the search function on this thread with no luck (or I'm just bad at searching).

I'm looking into the SLP Header Package - 1-3/4" Long Tube Header with High-Flow Cats and the PowerFlo Acle Back Exhaust.

From what I've seen it doesn't seem as tho the convertibles can have the full exhaust with X pipe, I'm guessing that is due to the extra bracing for the convertible. That being said, it just got shipped up to MN and got put away for the winter before I could get it up in the air and really look over it.

My long term plan is exhaust this Spring when I get it out of storage, they probably save up for a couple of years and drop the SLP Supercharger on it and possibly do a Cam upgrade right away as well.

Any suggestions folks?

Thanks!

Gunmetal Speedster · 01-30-2017, 03:40 PM

Here is a vid on Speed Engineering longtubes, catless midpipes, and the SW Retro Chambered Catback if anyone cares

FRESHSS · 02-08-2017, 04:25 PM

I don't think I've posted this clip but here's my old car doing a few acceleration runs & a cold start. It had TSP 1-7/8" headers with cat-less mid pipes, stock 2.5 inch piping, magnaflow tru-x x-pipe & dynomax 12" race series bullet mufflers. I miss how this car sounded
Acceleration runs:
https://youtu.be/x03VODyzo4A
Cold start:
https://youtu.be/K5zay4_glGQ

sinisterlsx510 · 02-18-2017, 08:29 PM

anyone have the dynomax mini race bullets on their car?

Hixson · 02-24-2017, 02:33 PM

Didn't read the whole thread, but I didn't see it posted on the first page - everyone should check out Stainless Works Retro Chambered catbacks. I know everyone is biased towards what they have - but ive never found a cleaner and less raspy exhaust that has as much UMPH as mine. Will try to post video when I get home, but definitely worth checking out if youre trying to stay away from the classic fart pipe sound

12-03-2016, 03:54 PM	#535
Aaron_W Drives: 2012 2SS Join Date: Oct 2016 Location: Puyallup WA Posts: 32	I have the round tips, not oval. __________________ 2012 2SS/RS Transmarobird (white trash ferrari) 6spd / Silver / Airraid Intake / GMPP Axleback / H&R Lowering Springs / Hurst Short Shifter / GM Blade Dovetail / Heritage Grille / ZR1 Front Splitter / Speed Engineering Longtubes / Tuned by Dynosteve 2004 Corolla LE / 5 spd / 35mpg / Burnouts

12-03-2016, 05:03 PM	#538
wbdinger Drives: NSMNJW=2010 CGM 2SS/RS LS3 Join Date: Dec 2009 Location: Exshaw Alberta Canada Posts: 1,214	Yes talking about muffler shape not the tips lol. So Aaron you have the 92231570 mufflers __________________ DYI Oil Catch Can, DYI dash ABL, DyI fender "V"emblems, ACC Plasma DRL, DYI Painted red SS on steering wheel, DYI CGM painted bowties on wheels, DYI Clearcoated Brake Calipers, Eibach pro 1" lowering springs, GM Heratige grill, GM skipshift eliminator, GMPP 92206992 Exhaust, 2-10" Kenwood subs w/350watt pioneer amp, RiderGraphics hood spears/gill outlines, 9x20 wheels-custom silver,weather tech mats, ARH 17/8 headers and cats. Tuned by Davenport Motorsports. Last edited by wbdinger; 12-03-2016 at 05:06 PM. Reason: typo

01-30-2017, 03:40 PM	#543
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Here is a vid on Speed Engineering longtubes, catless midpipes, and the SW Retro Chambered Catback if anyone cares __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

02-08-2017, 04:25 PM	#544
FRESHSS @MickJones_808 Drives: '16 Camaro 2SS A8 Join Date: Jun 2013 Location: Honolulu, Hawaii Posts: 75	TSP Headers & dynomax exhaust I don't think I've posted this clip but here's my old car doing a few acceleration runs & a cold start. It had TSP 1-7/8" headers with cat-less mid pipes, stock 2.5 inch piping, magnaflow tru-x x-pipe & dynomax 12" race series bullet mufflers. I miss how this car sounded Acceleration runs: https://youtu.be/x03VODyzo4A Cold start: https://youtu.be/K5zay4_glGQ __________________ '16 Camaro 2SS A8 \| 22" Giovanna Spira Flow Formed Wheels \| Continental ExtremeContact DWS06 (265/30ZR22 Front; 285/30ZR22 Rear) \| GM Darkened Tail Lights \| GM Clear Sidemarkers \| DiodeDyamics LED Sidemarker Lights (Clear Front/Red Rear) \| Suggery LED Turn Signal Lights \| Paint corrected with Chemical Guys products \| CQuartz Ceramic Coating \| More mods coming soon..... Follow my build on Instagram @ MickJones_808

02-18-2017, 08:29 PM	#545
sinisterlsx510 Drives: 14 ss camaro summit white Join Date: Oct 2014 Location: bay area Posts: 463	anyone have the dynomax mini race bullets on their car? __________________ 2014 ss camaro Stainless works long tubes , rotofab cai , vararam wedge , muffler delete,cat delete ,resonator delete , x pipe 2019 sierra duramax 2500 all terrain x 2001 trans am Lsx 408 ci rebuild in progress(dead project) 1967 camaro Sbc 327.

12-16-2016, 02:53 PM	#539
15LS3 Drives: 15 Camaro SS Join Date: Jul 2016 Location: Jacksonville Fl Posts: 39	Anyone with the GM axle back system with a resonator delete? trying to decide weather I should sell the axle back for a NPP set up .

12-16-2016, 04:21 PM	#540
MarioSS Drives: 2010 Camaro SS (RS LS3) Join Date: Dec 2015 Location: Jo Posts: 303	Going to install mine in 3 days with stock H pipe but with catless LTH Sent from my ONEPLUS A3000 using Tapatalk

01-23-2017, 05:55 PM	#541
FKNGRSY Drives: 2014 1SS Join Date: May 2014 Location: Canada Posts: 158	Kooks 1 7/8" headers, catless, NPP, fuse pulled.

01-24-2017, 11:39 AM	#542
AV8RLEO Drives: 2012 Camaro Convertible 2SS-RS, M/T Join Date: Jan 2017 Location: Pine Island, MN Posts: 15	Hey all.... forum newbie and newbie Camaro owner here.... 2012 SS2-RS Convertible, LS3 with a 6 speed M/T... What are the convertible guys doing for exhaust? Tried using the search function on this thread with no luck (or I'm just bad at searching). I'm looking into the SLP Header Package - 1-3/4" Long Tube Header with High-Flow Cats and the PowerFlo Acle Back Exhaust. From what I've seen it doesn't seem as tho the convertibles can have the full exhaust with X pipe, I'm guessing that is due to the extra bracing for the convertible. That being said, it just got shipped up to MN and got put away for the winter before I could get it up in the air and really look over it. My long term plan is exhaust this Spring when I get it out of storage, they probably save up for a couple of years and drop the SLP Supercharger on it and possibly do a Cam upgrade right away as well. Any suggestions folks? Thanks!

02-24-2017, 02:33 PM	#546
Hixson Drives: 2015 Camaro 1SS L99 Join Date: Apr 2016 Location: Quad Cities, Iowa Posts: 623 View My Garage	Didn't read the whole thread, but I didn't see it posted on the first page - everyone should check out Stainless Works Retro Chambered catbacks. I know everyone is biased towards what they have - but ive never found a cleaner and less raspy exhaust that has as much UMPH as mine. Will try to post video when I get home, but definitely worth checking out if youre trying to stay away from the classic fart pipe sound