04-28-2020, 02:16 AM | #1 |
Drives: 2010 Camaro 2ss Join Date: Jul 2019
Location: Kleinburg
Posts: 7
|
Engine light p0604!!!
Hello everyone, i have a 2010 ss LS3 model, ive had a DTC P0604 which means ECM internal ram memory error. Long story but started the car in extreme cold weather in the garage and it ran, then shut off and would not start. then the next day it ran fine but engine light came on with that code and does not clear what so ever. I have checked the ECM ground, all fine.
|
04-28-2020, 08:06 AM | #2 |
Drives: 2014 Camaro SS 1Le Join Date: Feb 2016
Location: IL
Posts: 1,614
|
Clear it... see if it pops up again
__________________
2014 SS 1LE Money Pit/ Forged 402
CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch 730whp: 630Trq |
04-29-2020, 02:34 PM | #3 |
Drives: 2011 2SS, 2006 GMC Sierra Join Date: Jul 2019
Location: MA
Posts: 253
|
Low voltage or a momentary loss of power or ground to the ECM may cause this DTC to set.
what I would do is disconnect both battery cables for about an hour. test the battery and charge if needed. This will let the modules power down. With the battery charged reconnect the cables and koeo then start the car up. Ive seen these types of codes including communication codes caused by low voltage. If its still on after that its most likely the ECM |
|
|
|
|