06-12-2015, 08:39 AM | #15 | |
Drives: 2016 Z06 Join Date: Mar 2011
Location: Texas
Posts: 101
|
Rockers
I think the splitter is conected to the lower grill and to remove it you will need to remove the front facia. |
|
06-12-2015, 11:56 AM | #16 |
hahaha, I hope you're wrong. I'm looking at putting button sensors in the front like we have in the rear. I wish GM would have put them there in the first place. Until then I will be backing into stalls.
__________________
NOW:2014 Black on Yellow ZL1 Convertible 6 Speed.PREVIOUS CARS:2010 black on black 2SS/RS Manual,1998 Black on Black T-Tops SS Manual,1997 White on White with Orange racing stripes Z-28 30th Anniversary Convertible Auto,1995 Tan on White Manual Z-28 Convertible,1993 coupe Black on Red Z-28 Auto.
|
|
06-12-2015, 12:04 PM | #17 |
Good stuff! thanks. The dealership used my rockers to jack the car up for wheel work. I think I should just take it back to them and they can fix it.
__________________
NOW:2014 Black on Yellow ZL1 Convertible 6 Speed.PREVIOUS CARS:2010 black on black 2SS/RS Manual,1998 Black on Black T-Tops SS Manual,1997 White on White with Orange racing stripes Z-28 30th Anniversary Convertible Auto,1995 Tan on White Manual Z-28 Convertible,1993 coupe Black on Red Z-28 Auto.
|
|
06-12-2015, 02:08 PM | #18 | |
I found a simple solution if I can't get those button sensors put in.
__________________
NOW:2014 Black on Yellow ZL1 Convertible 6 Speed.PREVIOUS CARS:2010 black on black 2SS/RS Manual,1998 Black on Black T-Tops SS Manual,1997 White on White with Orange racing stripes Z-28 30th Anniversary Convertible Auto,1995 Tan on White Manual Z-28 Convertible,1993 coupe Black on Red Z-28 Auto.
|
||
06-12-2015, 02:49 PM | #19 |
Drives: 2012 2LS Join Date: Feb 2012
Location: Rochester Hills, MI
Posts: 65
|
|
06-12-2015, 03:39 PM | #20 |
Drives: 2013 ZL1 Victory Red Vert Join Date: Jul 2014
Location: Wauconda, Il
Posts: 315
|
Any instructions or video on how to remove front bumper please. I know you have to take it off to replace splitter. Any help would be much appreciated. Video would be to good to be true
|
06-14-2015, 09:51 AM | #21 | |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,565
|
Quote:
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
|
06-14-2015, 09:56 AM | #22 | |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,565
|
Quote:
Here's a heritage grille install video which shows taking off the front bumper. ZL1 is nearly identical. You would have to do a little extra work to take some screws loose underneath the splitter on ZL1, though. http://www.camaro5.com/forums/showpo...87&postcount=1
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
|
06-14-2015, 10:00 AM | #23 |
Drives: 2013 ZL1 Victory Red Vert Join Date: Jul 2014
Location: Wauconda, Il
Posts: 315
|
The GM part # for the ZL1 splitter is 22894223
|
06-14-2015, 10:02 AM | #24 |
Drives: 2013 ZL1 Victory Red Vert Join Date: Jul 2014
Location: Wauconda, Il
Posts: 315
|
I used the search button and saw that video but seems to be a little different. Mine is a ZL1 I wish it was exact not to good at speculation or similiar
|
06-14-2015, 10:56 AM | #25 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,565
|
Doesn't matter if yours is a ZL1 or non-ZL1 with the ZL1 front bumper. It's still the identical procedure to remove it.
It's exactly the same as an SS or non-SS as far as attaching to the fenders and the top. Since you don't have a bottom engine cover plate, no worries about the several bolts to undo that. But you do need to undo the bottom front and air duct areas of the wheel well liners. All the bolts are easily accessible for the ZL1 bottom bits. In any case, you CAN do it by yourself, but obviously easier if you have some help.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
06-14-2015, 11:53 AM | #26 |
I run 2 catch cans...
|
While you're replacing it, install a front camera so you won't ever have to do this again: http://www.camaro5.com/forums/showth...=315604&page=2 (post #48)
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
06-14-2015, 02:01 PM | #27 |
Drives: 2013 ZL1 Victory Red Vert Join Date: Jul 2014
Location: Wauconda, Il
Posts: 315
|
OK thanks for the help
|
06-14-2015, 08:23 PM | #28 |
Drives: 2012 ZL1 Join Date: Dec 2010
Location: Montreal south shore Canada
Posts: 38
|
Splitter
|
|
|
|
|