05-19-2016, 01:14 PM | #1 |
Drives: 2014 SS ashen grey Join Date: Dec 2013
Location: Gainesville GA
Posts: 390
|
Are we single or three bolt factory?
I ordered a BTR stage 4 cam it came and it has 3 bolts in a line next to each other. One on each side and a bigger one in the middle. I thought ls3's were single bolt? Is that right? They didn't mention I would have to swap to anything on the phone. Said it was the same as my factory setup? Am I looking at this wrong or no
|
05-19-2016, 01:19 PM | #2 |
Drives: 2014 SS ashen grey Join Date: Dec 2013
Location: Gainesville GA
Posts: 390
|
Nvm
|
05-19-2016, 01:21 PM | #3 |
Drives: 2014 2SS/RS Join Date: Jun 2013
Location: Orlando, FL
Posts: 793
|
You are correct. The factory ls3 is single bolt. You will need a three bolt cam gear.
|
05-19-2016, 01:27 PM | #4 |
Drives: 2014 SS ashen grey Join Date: Dec 2013
Location: Gainesville GA
Posts: 390
|
|
05-19-2016, 08:19 PM | #5 |
Drives: 2011 2SS/RS M6 Join Date: Oct 2015
Location: Utah
Posts: 1,940
|
I'm pretty sure you are looking at the back of the cam. The front of the cam has a locating pin that stick out of the face. Factory is a single bolt as said before. A three bolt will have them arranged in a triangle pattern around the center of the cam. This is a three bolt cam.
|
05-25-2016, 07:25 PM | #6 |
Drives: 2014 SS ashen grey Join Date: Dec 2013
Location: Gainesville GA
Posts: 390
|
It looks like that. It's a three bolt
|
|
|
|
|