You are browsing camaro5 
 |
|
09-15-2013, 08:03 PM
|
#1 | ||
|
"Cam Only"
|
Got my CMS custom grind cam installed.
So I posted this in the V8 LS3 engine exhaust and bolt-on section, but I thought I'd share it here too.
I finally got cammed. I went with a custom grind cam from Ryne @ Cunningham Motorsports. Ryne and Mike were amazing in answering all my questions regarding which cam to go with, and overall it was an outstanding experience. Cam specs are 23x/24x, 11x I am very pleased that I put down 483rwhp and 433rwtq after Ryne dialed her in. Here is an idle clip: (watch in 1080p, recorded with my iPhone 5) And here is the dyno video: (watch in 1080p, recorded with my iPhone 5) And here is the dyno sheet:  I love the sound and the extra power, really makes it sound like some old school muscle when I pull up at a stop light, and when I get on it. Would HIGHLY recommend anyone who is considering a cam to contact Ryne@CMS and discuss what he can do for you. Ryne and Mike do amazing work, and I'm fortunate to be only a few hour drive from their shop in Murrieta, CA. Can't wait to see how she does at an upcoming airstrip event in October. And Mike installed my tow hook too. 
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
||
|
|
|
09-15-2013, 08:35 PM
|
#2 |
            
Drives: 2017 Corvette Grand Sport Join Date: May 2010
Location: Central NJ
Posts: 10,870
|
Awesome! Sounds great when at idle
 One of the many things planned down the road for my camaro
__________________
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
