Best CAI you can get

[Muddflap]

My opinion is the ADM CAI with Scoop

[Rjizzle10]

Originally Posted by Bad70supreme

Stay away from anything with an aluminum tube!!! I tested a CAI with polished tube against my home made setup and my setup won hands down. I lost power from heat, the tube would get much hotter then the plastic tube and I was traping 1-2 mph less. I iced the tube down and picked up a bit, installed my plastic home made setup and instantly gain my power and ET back. This all done on the same day, I even noticed it on the street on a hot day it seemed sluggish over my owne setup.

You will probably get similar results with any brand just make sure you run the plastic tube!

Doesn't CAI come with an alluminum pipe?

[62nalide]

Originally Posted by Bad70supreme

Stay away from anything with an aluminum tube!!! I tested a CAI with polished tube against my home made setup and my setup won hands down. I lost power from heat, the tube would get much hotter then the plastic tube and I was traping 1-2 mph less. I iced the tube down and picked up a bit, installed my plastic home made setup and instantly gain my power and ET back. This all done on the same day, I even noticed it on the street on a hot day it seemed sluggish over my owne setup.

You will probably get similar results with any brand just make sure you run the plastic tube!

Kinda hard to take your input as a consideration with that test, your ETs seem low for the setup you have.
I don't mean it in a bad way.

[davidcroft]

Originally Posted by ssmike

I'd be affraid of vapor lock through a puddle with that filter so low!

+1. Holy Hydrolock batman!
That's why no one runs it. Go through a big puddle and your motor is toast!

[62nalide]

Originally Posted by Muddflap

My opinion is the ADM CAI with Scoop

Yes sir!

[BlaqWhole]

K&N!!!

[MrWray]

Originally Posted by Tran

.

Ceramic coated aluminum yes, the CAI has proven to run lower IATs. If the CAI ran high IATs it wouldnt be producing the HP gains that it does

[Jims Mongoose]

Originally Posted by JDP Tyler

My favorites are the CAI, Roto-Fab and Airaid. All 3 provide great gains and have different options as far as looks go, so you can pick which ever one fits your style and preference.

Let me know if I can answer any questions for you.

Best regards,

Tyler
888-308-6007

This unit that I now have on my car comes out real well in testing and the quality of the product is superb.

It is being overlooked and all of you guys might want to give it more consideration.
Just my 7 cents

Jim

[Jims Mongoose]

Originally Posted by Jims Mongoose

This unit that I now have on my car comes out real well in testing and the quality of the product is superb.

It is being overlooked and all of you guys might want to give it more consideration.
Just my 7 cents

Jim

I forgot to say which one, what an idiot I am.

Airraid.

Jim

[Bad70supreme]

Originally Posted by 62nalide

Kinda hard to take your input as a consideration with that test, your ETs seem low for the setup you have.
I don't mean it in a bad way.

I have a tiny cam running on stock valve train, headers, and a stall. I think my car runs damn good for a 3.45 gear with a 2.48 first gear. It's only been on the track one time with this setup and I have fine tuning to do. Sorry your not impressed but I am on the fast list also, that must say something.

[62nalide]

Originally Posted by Bad70supreme

I have a tiny cam running on stock valve train, headers, and a stall. I think my car runs damn good for a 3.45 gear with a 2.48 first gear. It's only been on the track one time with this setup and I have fine tuning to do. Sorry your not impressed but I am on the fast list also, that must say something.

That's why I said don't take it the wrong way. But your basically running bokt on times. And judging by the JT's test on the adm is a good example of a test IMO. He picked up MPH and better ET. He runs the same times back to back. By no means am I dissing your setup. Thats why on the other post I mentioned bigger cam.

[Bad70supreme]

Originally Posted by MrWray

Ceramic coated aluminum yes, the CAI has proven to run lower IATs. If the CAI ran high IATs it wouldnt be producing the HP gains that it does

All I know is what it did on my car at the track. The tube would very hot, much hotter then the plastic tube after a pass. My friends intake was also running much cooler then the CAI after we would run, his is also plastic. I put a bag of ice on the tube and cooled it off and picked up mph, put my plastic setup on and ran my fastest pass if the day. Take it how you want, ill never run anything but plastic.