11-04-2012, 07:02 PM | #1 |
Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012
Location: Chicago, IL
Posts: 478
|
Will this setup work?
Can anyone tell me if this setup will work and not have any rubbing or bottoming out issues:
BMR Stage 3 Kit (which lowers the car 1" front and back) Granatelli 1G kit TSW Nrings Staggered 20x10 off set 35 / 20x9 off set 35 Nitto Invo 315/35/20 rear 275/40/20 front I've been told that those rims with those tire are same diameter as stock rims and tires. Only difference is that front and rear tires will be wider.
__________________
2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit
|
11-05-2012, 10:27 AM | #2 |
Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012
Location: Chicago, IL
Posts: 478
|
Bump... There is no one running this?
__________________
2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit
|
11-06-2012, 09:18 PM | #3 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
I can tell you that TSW Donington's 20x8.5 with 35 mm offset works well on front. Not too sure the 20x9 with 35 offset will work though since mine are about a 1/4" away from calipers. Yours might sit ON the caliper.
|
11-07-2012, 10:01 AM | #4 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
The only issue I see you having is that our BMR subframe connectors/tunnel brace in the BMR Stage 3 Kit will not work in conjunction with the Granatelli 1G kit because they use the same mounting points on the chassis of the vehicle.
|
11-07-2012, 04:29 PM | #5 |
Drives: Widebody 2013 Mustang GT Join Date: Feb 2012
Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631
Posts: 2,848
|
To answer the questions on the wheels, no they will not rub, I have other customers running that set up as well, no issues to report.
|
12-07-2012, 10:05 PM | #6 |
Drives: 2011 White Join Date: Aug 2011
Location: Alexander City, Alabama
Posts: 78
|
+++++++++++++++++++++++++++++++++++
Last edited by Hot Rod R1; 12-10-2012 at 08:05 AM. |
12-08-2012, 12:28 AM | #7 |
Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012
Location: Chicago, IL
Posts: 478
|
This thread is old and I am not going with this anymore. Please disregard this thread.
__________________
2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit
|
12-08-2012, 08:27 AM | #8 |
Drives: camaro Join Date: Dec 2012
Location: Signal Hill CA
Posts: 3
|
good idea, This thread is old and I am not going with this anymore. Please disregard this thread.thanks
|
|
|
|
|