AFR Gauge install ? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JHall651 · 01-30-2013, 10:20 PM

Hey guys. Not sure if this is the correct forum location for this thread but I am trying to find the best place to install the AFR sensor. I have a cat back Borla exhaust but everything north of the cats is stock. I ordered the ADM custom Boost and AFR gauges and would just like to know where the best place to install the sensor is... Thanks for the help.

BlkSlvrdo129 · 01-30-2013, 10:30 PM

I would put it perpendicular to the 1st O2 sensor on bank 1, about half way up from the stock bung and the flange (about where the middle white dot is), assuming there's enough clearance for it at that angle:

01-30-2013, 10:20 PM	#1
JHall651 Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012 Location: Chicago, IL Posts: 478	AFR Gauge install ? Hey guys. Not sure if this is the correct forum location for this thread but I am trying to find the best place to install the AFR sensor. I have a cat back Borla exhaust but everything north of the cats is stock. I ordered the ADM custom Boost and AFR gauges and would just like to know where the best place to install the sensor is... Thanks for the help. __________________ 2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit

01-30-2013, 10:30 PM	#2
BlkSlvrdo129 Drives: 2008 Silverado Join Date: Dec 2010 Location: Canada Posts: 98	I would put it perpendicular to the 1st O2 sensor on bank 1, about half way up from the stock bung and the flange (about where the middle white dot is), assuming there's enough clearance for it at that angle: