new squash return-less system? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chris82xx · 11-28-2012, 10:18 PM

This might cheer you. I started going to local cars show and was proud to show my shit. It was a crowd pleaser and telling them the power I was putting out was unheard of....until......this Mustang Shelby weenie came up, asked me how much power. He goes "Oh, see that Shelby over there? Yea. 756 to the rear" That bastard, I wanted to whoop his ass right there, but I held back. So this is my way of besting him. I'm out for blood.....the horse kind tooo

bct10985 · 11-29-2012, 06:01 AM

E85 450lph walbro in stock fuel bucket????

DarkCry956 · 12-10-2012, 11:46 AM

Any word on this fuel system?

Jessika · 12-10-2012, 12:26 PM

The full return system is available and shipping now.
The returnless FPCM will be available in January.

VanquisherSS · 12-10-2012, 04:07 PM

Quote:

Originally Posted by Jessika@SCC

The full return system is available and shipping now.
The returnless FPCM will be available in January.

Whats the difference between the two systems?

Jessika · 12-11-2012, 10:41 PM

Andy will be popping in here when he gets a moment to give to official response.
I was under the impression that it has to do with max supported hp. But I could be wrong.
On my car, I ran a returnless system more or less.

Supercharged SS · 12-11-2012, 10:46 PM

Quote:

Originally Posted by VanquisherSS

Whats the difference between the two systems?

More plumbing is needed for the return style. The camaro comes return less. So I believe there will be additional labor with the return. But I could be full of shit.

I'd love some info on this too please. My LPE is only good up until 800 rwhp and I'd rather not have it that close to its max if possible.

Thanks!!

Jessika · 12-11-2012, 10:51 PM

Quote:

Originally Posted by Supercharged SS

More plumbing is needed for the return style. The camaro comes return less. So I believe there will be additional labor with the return. But I could be full of shit.

I'd love some info on this too please. My LPE is only good up until 800 rwhp and I'd rather not have it that close to its max if possible.

Thanks!!

I think you should be full return. But i think that support 1400hp. Over kill > Under kill

sent from my Note2 using Tapatalk

2SS45th · 12-11-2012, 10:54 PM

When I did my fuel system, LPE said up to 900whp if I was lucky. I would have run the Squash system, but it definitely more work to setup. The initial cost is also about 1.5x higher.

Supercharged SS · 12-11-2012, 10:57 PM

Quote:

Originally Posted by Jessika@SCC

I think you should be full return. But i think that support 1400hp. Over kill > Under kill

sent from my Note2 using Tapatalk

I should really stop asking questions and just have Ted do what he wants. That's how it always works out in the end anyway!!

VanquisherSS · 12-11-2012, 11:07 PM

Quote:

Originally Posted by Supercharged SS

More plumbing is needed for the return style. The camaro comes return less. So I believe there will be additional labor with the return. But I could be full of shit.

I'd love some info on this too please. My LPE is only good up until 800 rwhp and I'd rather not have it that close to its max if possible.

Thanks!!

If that's truly the case then I will wait for the returnless. No rush car is sitting for the winter anyway

avellanet.jr · 12-30-2012, 04:15 PM

Bump

Any news on supported HP or release? Trying to compile my parts

DarkCry956 · 12-30-2012, 05:53 PM

I PMd Andy and he said 1500HP. I'm still waiting for a release date as well. He did say late this year and Jessica mentioned January. I'd just like if they gave more details on this unit.

Jessika · 12-30-2012, 07:14 PM

It will be very soon.

sent from my Note2 using Tapatalk

11-28-2012, 10:18 PM	#29
Chris82xx Make your peace with God! Drives: 2011 Camaro SS/RS M6 Convertible Join Date: Dec 2011 Location: Dirty Jersey Posts: 1,595	This might cheer you. I started going to local cars show and was proud to show my shit. It was a crowd pleaser and telling them the power I was putting out was unheard of....until......this Mustang Shelby weenie came up, asked me how much power. He goes "Oh, see that Shelby over there? Yea. 756 to the rear" That bastard, I wanted to whoop his ass right there, but I held back. So this is my way of besting him. I'm out for blood.....the horse kind tooo __________________ ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft 811RWHP/719RWTQ UNDER MAJOR OVERHAUL!!

12-11-2012, 10:54 PM	#37
2SS45th Drives: 11 Seconds or Faster Join Date: May 2012 Location: Arvada, Colorado Posts: 2,797 View My Garage	When I did my fuel system, LPE said up to 900whp if I was lucky. I would have run the Squash system, but it definitely more work to setup. The initial cost is also about 1.5x higher. __________________ I Ain't About That Stock Life.

11-29-2012, 06:01 AM	#30
bct10985 Drives: 2010 2SS LS3, 2013 duramax Join Date: Nov 2012 Location: Dover, De Posts: 1,451	E85 450lph walbro in stock fuel bucket????

12-10-2012, 11:46 AM	#31
DarkCry956 Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011 Location: Texas RGV Posts: 794	Any word on this fuel system?

12-10-2012, 12:26 PM	#32
Jessika Account Suspended Drives: Anything Blown Join Date: Aug 2010 Location: SoCal Posts: 1,194	The full return system is available and shipping now. The returnless FPCM will be available in January.

12-11-2012, 10:41 PM	#34
Jessika Account Suspended Drives: Anything Blown Join Date: Aug 2010 Location: SoCal Posts: 1,194	Andy will be popping in here when he gets a moment to give to official response. I was under the impression that it has to do with max supported hp. But I could be wrong. On my car, I ran a returnless system more or less.

12-30-2012, 04:15 PM	#40
avellanet.jr Emerald Coast Camaros Drives: 2014 ZL1 #77 Join Date: Jan 2011 Location: Crestview, FL Posts: 824	Bump Any news on supported HP or release? Trying to compile my parts

12-30-2012, 05:53 PM	#41
DarkCry956 Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011 Location: Texas RGV Posts: 794	I PMd Andy and he said 1500HP. I'm still waiting for a release date as well. He did say late this year and Jessica mentioned January. I'd just like if they gave more details on this unit.

12-30-2012, 07:14 PM	#42
Jessika Account Suspended Drives: Anything Blown Join Date: Aug 2010 Location: SoCal Posts: 1,194	It will be very soon. sent from my Note2 using Tapatalk