04-08-2014, 06:20 PM | #1 |
Drives: 2014 camaro 1le Join Date: Feb 2014
Location: northern wisconsin
Posts: 34
|
Anyone got Aftermarket heads with night fury cam.
Just curious if anyone is using the night fury cam with aftermarket heads and if so what kinda numbers are they making? I ordered my exhaust from tsp today and some magnaflow bullets just on the fence about ordering some mast black label heads or prc260 heads when I pull the trigger on the night fury
Really wanna see over 500 rwhp with this car saving up for a whipple this winter |
04-08-2014, 07:34 PM | #2 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
Mast blacks= nice=$$$$
__________________
-John S.
|
04-08-2014, 08:20 PM | #3 |
Drives: SS RS SIM Join Date: Jul 2009
Location: Greenville, KY
Posts: 201
|
I didn't do aftermarket heads but i did let lethal port them. I came out at 508 RWHP.
|
04-08-2014, 08:28 PM | #4 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
I made 490 rwhp with Mast heads and a cam that was smaller then the NF. I would think over 500 should be no problem.
|
04-09-2014, 01:50 PM | #5 |
Drives: 2014 camaro 1le Join Date: Feb 2014
Location: northern wisconsin
Posts: 34
|
Thanks for the responses Craig b what kinda duration and lift were you running if you don't mind me asking?
|
04-09-2014, 06:47 PM | #6 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
This is the cam. Vengeance Racing VRSP2 Camshaft- 227/235 .614/.621 115+4. Made 741 rwhp and 678 ftlbs. with a ECS kit on meth, 10.8 lbs. boost.
|
|
|
|
|