09-02-2015, 11:23 AM | #1 |
Drives: 2013 camaro zl1 Join Date: Dec 2013
Location: dfw
Posts: 112
|
Brake pads/rotors.
So if I am replacing my front rotors due to it being warped, do I need to replace my brake pads as well? The pads still have alot of meat left.
|
09-02-2015, 11:31 AM | #2 |
Drives: Black 2SS RS Join Date: Jul 2011
Location: PemBROKE Pines FL
Posts: 99
|
Yes get ceramic pads you will spend less time cleaning your wheels. I will let the rest chime in on how amazing this is that pad are with no concern because your probably not weekend johnny racecar driver. And can accept that new rotors and ceramic pads will stop better then warped ones.
|
09-02-2015, 11:54 AM | #3 |
Drives: 2010 CGM Camaro 2SS/LS3 Join Date: Oct 2013
Location: Raleigh-Durham
Posts: 1,409
|
No, you can keep the same brake pads, just hit them with some sand paper to rough them up a bit and do a bed in process like new brake pads.
Ceramic pads will not stop better than the OEM ZL1 brakes.
__________________
2010 2SS
BMR 1" Springs Koni Orange struts/shocks 1LE rear sway bar SRP Racing Pedals Hurst Billet short shifter Square tire/wheel setup Elite Engineering Catch Can Stainless Power longtubes/highflow cats K&N Typhoon CAI RPM Motorsports of Garner, NC dyno tune (421 RWHP) |
09-02-2015, 12:00 PM | #4 |
Drives: 2013 camaro zl1 Join Date: Dec 2013
Location: dfw
Posts: 112
|
If I do get pads im going with oem. My concern is if the pads are damaged or un even. Would it cause the rotors to warp again?
|
09-02-2015, 03:06 PM | #5 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
+1. JusticePete, had a lot to say about the reduced braking on the ZL1 going ceramic.
Myself, new pads with rotors, but you can sand yours up a bit to bed them in. -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
09-02-2015, 07:59 PM | #6 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
|
|
|
|