What Did You Do To Your Camaro Today? - Page 1490 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS PANTHER · 03-31-2018, 11:13 AM

Quote:

Originally Posted by BAD DAB

Yep.......... you are killin’ it! Car looks great! The ZL1 hood has that WOW factor.

Thank you Bad Dab. I needed a vented hood for my F.I. build and was lucky enough to find a used factory black with cf insert ZL1 hood for a good price. Your car is looking great too.

BlazeNGlory · 03-31-2018, 12:35 PM

Front brakes were shot on my 2011 V6 so upgraded to ATS 4-piston brembos on the front today.

CCMADONNA · 03-31-2018, 01:55 PM

PANTHER!!!

Your car just keeps getting better and better!

SS PANTHER · 03-31-2018, 03:53 PM

Quote:

Originally Posted by CCMADONNA

PANTHER!!!

You're car just keeps getting better and better!

Thank you Madonna. Keep enjoying the beach.

BIO-HAZARD · 03-31-2018, 04:46 PM

Got to see BIO-HAZARD for the 1st time since Oct. 2017 . Took the car cover off and checked the car over looks great , still has the new car smell when you open the door , LOL . Loaded up all the stuff for the 1st car show of the season which is next Sat . April 7th . I know its early and it will be chilly but hey gotta try it . Checked all the led lights and started it up sounded a little rough but it idled in . Cant wait to hit the roads for the summer shows ...

BLU DUCE · 03-31-2018, 05:17 PM

Quote:

Originally Posted by SS PANTHER

Thanks Welker. The fit is great and I really like the looks. It’s advertised not to lower your clearance, although, you have a lip out in front. If I don’t damage it in a reasonable amount of time, through various driving situations, I will probably buy their rockers also. I got mine from JDP Motorsports in the satin black finish. I would check out some of the reputable vendors for price. ACS does not do much in discounts. Have a good weekend.

Is that an ACS insert or a OEM ZL1. Either way looks awesome.

BLU DUCE · 03-31-2018, 05:20 PM

This is mine an ACS I cut the hole and installed it my self. 4 yrs. ago.

SS PANTHER · 03-31-2018, 07:05 PM

Quote:

Originally Posted by spike III

Is that an ACS insert or a OEM ZL1. Either way loos awesome.

Thanks Spike. It is a used factory ZL1 black hood with the OEM exposed cf insert. I had to remove the drip tray to get it to fit my SLP TVS2300. BTW, how did you mount your front license plate? I don’t want to run one, but I may end up having to. Your location looks to be between the splitter and the lower fascia. I have a Jacfab bent to contour mount that I would use.

SS PANTHER · 03-31-2018, 07:08 PM

Quote:

Originally Posted by spike III

This is mine an ACS I cut the hole and installed it my self. 4 yrs. ago.

Looks good and I like your plate location. Do you have a T4 splitter also? Looks like a street scene or Stillen.

BLU DUCE · 03-31-2018, 07:34 PM

Quote:

Originally Posted by SS PANTHER

Looks good and I like your plate location. Do you have a T4 splitter also? Looks like a street scene or Stillen.

My splitter is a Street scene. My plate mount ia a JacFab. It bolts directly under neath with the holes & screws already there. Are you going to put the ZL1 rockers on to. I did but painted mine color of the car. I also put the ZL1 rear diffuser on for the dual quad tips.

SS PANTHER · 03-31-2018, 08:07 PM

Quote:

Originally Posted by spike III

My splitter is a Street scene. My plate mount ia a JacFab. It bolts directly under neath with the holes & screws already there. Are you going to put the ZL1 rockers on to. I did but painted mine color of the car. I also put the ZL1 rear diffuser on for the dual quad tips.

Were you able to slip the bracket in between the splitter and lower fascia and get to the two bolts without a problem? I am thinking about going with the satin black ACS rockers if I do it.

BLU DUCE · 03-31-2018, 08:24 PM

Quote:

Originally Posted by SS PANTHER

Were you able to slip the bracket in between the splitter and lower fascia and get to the two bolts without a problem? I am thinking about going with the satin black ACS rockers if I do it.

Yes the bracket fit perfect and no problem getting the bolts out and back in.

SS PANTHER · 03-31-2018, 10:11 PM

Quote:

Originally Posted by spike III

Yes the bracket fit perfect and no problem getting the bolts out and back in.

Good to hear. Thanks.

BigJ · 04-02-2018, 03:32 PM

Painted the brake calipers and installed Spyder LED taillights!!

03-31-2018, 12:35 PM	#20848
BlazeNGlory Drives: 2011 Camaro 1LT Join Date: Jan 2015 Location: So Cal Posts: 216 View My Garage	Front brakes were shot on my 2011 V6 so upgraded to ATS 4-piston brembos on the front today. __________________ Hotchkis Lowering Springs, Pfadt Balance Rear Sway Bar, BMR End Links, Cadillac ATS Front Brembo 4-Piston Brakes, VMAX Ported Throttle Body, VMAX Ice-olator, Volant Cold Air Intake, Magnaflow Resonated X-Pipe, Magnaflow Axle-Back Exhaust, JEGS Exhaust Cutouts, GM Strut Tower Brace, Hurst Comp Shifter, Heritage Front Grill, 3D Carbon Front Air Dam, T-Rex Lower Billet Grill, 3D Carbon Front Vendor Vents, 20x9 OEM Polished RS/SS Wheels Front & Rear

03-31-2018, 01:55 PM	#20849
CCMADONNA Drives: 2014 SW 2SS/RS Join Date: Jun 2014 Location: So Cal Posts: 1,681 View My Garage	PANTHER!!! Your car just keeps getting better and better! __________________ 2014 2SS/RS VERT L99 SUMMIT WHITE AIRAID CAI BORLA ATAK CAT-BACK EXHAUST ELITE ENGINEERING CATCH-CAN RANGE AFM-DELETE MODULE HUPER OPTIK 40 CHROME PEDALS PREMIUM FLOOR MATS PREMIUM CARGO MAT DEDICATED 32GB iPHONE HD[/I][/B][IMG][/IMG] Last edited by CCMADONNA; 03-31-2018 at 06:16 PM.

03-31-2018, 04:46 PM	#20851
BIO-HAZARD INFECTED Drives: 2011 1LT Synergy Green Join Date: May 2011 Location: Upstate PA Posts: 3,226	Got to see BIO-HAZARD for the 1st time since Oct. 2017 . Took the car cover off and checked the car over looks great , still has the new car smell when you open the door , LOL . Loaded up all the stuff for the 1st car show of the season which is next Sat . April 7th . I know its early and it will be chilly but hey gotta try it . Checked all the led lights and started it up sounded a little rough but it idled in . Cant wait to hit the roads for the summer shows ... __________________ http://www.camaro5.com/forums/showthread.php?t=485533

03-31-2018, 05:20 PM	#20853
BLU DUCE Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011 Location: Chittenango, NY, USA Posts: 7,219 View My Garage	Spike III Build 2011 IBM 1SS/RS [COTW 6/25/12] This is mine an ACS I cut the hole and installed it my self. 4 yrs. ago. Attached Images __________________

04-02-2018, 03:32 PM	#20860
BigJ Drives: Red 2013 Camaro SS, Black 1980 Z28 Join Date: Jan 2015 Location: Texas Posts: 166	Painted the brake calipers and installed Spyder LED taillights!! Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM