New wing install on 1SS with products to help others! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jdrop01 · 07-03-2015, 05:00 PM

Well I ordered my wing from spoiler and wing king and it arrived today. As I did my research I did see that the spoiler only uses 4 out of the 6 holes that the stock spoiler uses. I decided to take some measurements and head off the Lowe's to see if I can find some hole plugs to make a OEM look/fit. I found some plugs made by Hillman in sizes 5/16 and 3/8 below are pictures. I also decided to throw on some clear silicone just in case to prevent water seeping through. Hope this helps anyone else looking for products to fill the holes with! I also used needle nose pliers to squeeze the 3/8th plug into place, it was pretty easy as the plug is flexible.

jdrop01 · 07-03-2015, 05:32 PM

Finished product! Paint matches perfect and the contour of the lines are perfect! Great product at a great price.

ChaseHundreds · 07-03-2015, 06:02 PM

That's the ZL1 or Z28?

jdrop01 · 07-03-2015, 06:43 PM

On the website it says regular ss but to me it more looks like the Zl1 than the z28 when comparing photos off google.

solizaaron18 · 07-03-2015, 06:54 PM

Bought the same one and I believe the z28. Very nice.

jdrop01 · 07-03-2015, 07:16 PM

Yea, I wanted to post the plugs I found since I know a lot of people were wondering how to seal them. Adding the clear silicone just gives me reassurance that it's good to go.

Demon War Horse · 07-03-2015, 10:06 PM

Tht is a Z28 style. I have the sane one. Good job OP!

jdrop01 · 07-03-2015, 10:27 PM

Glad to hear that! Now it's time for a front lip spoiler and some ZL1 sides.

07-03-2015, 05:00 PM	#1
jdrop01 Drives: 05 GTO Join Date: May 2015 Location: Weatherford, Texas Posts: 390	New wing install on 1SS with products to help others! Well I ordered my wing from spoiler and wing king and it arrived today. As I did my research I did see that the spoiler only uses 4 out of the 6 holes that the stock spoiler uses. I decided to take some measurements and head off the Lowe's to see if I can find some hole plugs to make a OEM look/fit. I found some plugs made by Hillman in sizes 5/16 and 3/8 below are pictures. I also decided to throw on some clear silicone just in case to prevent water seeping through. Hope this helps anyone else looking for products to fill the holes with! I also used needle nose pliers to squeeze the 3/8th plug into place, it was pretty easy as the plug is flexible.

07-03-2015, 06:02 PM	#3
ChaseHundreds Drives: 2011 Camaro 2SS/RS Join Date: Apr 2014 Location: Pensacola, FL Posts: 67	That's the ZL1 or Z28? __________________ Current Mods: RDP Tune, Kooks LT 1 7/8, Flow Masters Outlaw Series Cat-Back, Cold Air Induction CAI, Vmax Ported Throttle Body, Elite Engineering Catch Can II Gen, Oracle Tinted Side Markers, 15% Tinted Windows

07-03-2015, 07:16 PM	#6
jdrop01 Drives: 05 GTO Join Date: May 2015 Location: Weatherford, Texas Posts: 390	Yea, I wanted to post the plugs I found since I know a lot of people were wondering how to seal them. Adding the clear silicone just gives me reassurance that it's good to go. Last edited by jdrop01; 07-03-2015 at 10:17 PM.

07-03-2015, 10:06 PM	#7
Demon War Horse War Horse Pilot Drives: 2017 NFG 1SS 1LE Join Date: Jul 2014 Location: N.Texas Posts: 2,458 View My Garage	Tht is a Z28 style. I have the sane one. Good job OP! __________________ COTW 09/07/2015 - 2014 AGM 2SS/RS - RIP 6/01/17 2017 Nightfall Gray Metallic 1SS 1LE Born 5/17/17 - *Click Sig Pic below for for Demon War Horse 02 Build Thread* SigPic by Hazman

07-03-2015, 05:32 PM	#2
jdrop01 Drives: 05 GTO Join Date: May 2015 Location: Weatherford, Texas Posts: 390	Finished product! Paint matches perfect and the contour of the lines are perfect! Great product at a great price.

07-03-2015, 06:43 PM	#4
jdrop01 Drives: 05 GTO Join Date: May 2015 Location: Weatherford, Texas Posts: 390	On the website it says regular ss but to me it more looks like the Zl1 than the z28 when comparing photos off google.

07-03-2015, 06:54 PM	#5
solizaaron18 Drives: Camaro SS 2014 Join Date: Jan 2015 Location: Texas Posts: 322	Bought the same one and I believe the z28. Very nice.

07-03-2015, 10:27 PM	#8
jdrop01 Drives: 05 GTO Join Date: May 2015 Location: Weatherford, Texas Posts: 390	Glad to hear that! Now it's time for a front lip spoiler and some ZL1 sides.