09-25-2014, 06:12 PM | #1 |
Drives: 2013 2SS/RS M6 NPP Join Date: Dec 2012
Location: North Carolina
Posts: 340
|
UOA on my 2013 SS
I figured I would pull a sample. I know it is early since the engine is still new and breaking in. I enjoy driving this thing and it gets run hard. On ramps are a blast and so is taking off from stop signs on back country roads where I can see for a long distance. It see's redline often.
Oil filter used was a PF48 and ran BP 93 octane fuel since purchased new. OIL OEF 5w-30 MILES IN USE 3,012 MILES 6,998 SAMPLE TAKEN 9/20/14 Spectorscopic Analysis (ppm) ASTM D5185 Mod Iron 42 Copper 62 Lead 0 Aluminum 6 Tin 4 Nickel 0 Chromium 0 Titanium 0 Vanadium 0 Silver 0 Silicon 16 Boron 194 Calcium 1967 Magnesium 10 Phosphorus 655 Zinc 794 Barium 0 Molybdenum 73 Sodium 1 Potassium 0 Physical Properties Viscosity @ 40C ASTM D 445 Mod 56.0 Viscosity @ 100C ASTM D 445 Mod 12.3 Viscosity Index ASTM D 2270 * 224 Base Number 5.03 Acid Number ASTM D 974 1.60 IR (Indexing Numbers) JOAP Method Oxidation 13 Nitration 6 Antiwear 15 Sulfation 19 Glycol 0 Soot (%) 0.0 Single Component Test Water ppm 230 (c) Fuel Dilution % By GC* 0.8 |
|
|