How you should never paint your camaro. IMO - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bowtiesonly · 02-11-2018, 11:34 AM

https://www.ebay.com/itm/2015-Chevro...JaU6t2&vxp=mtr

Bow Tie Affair · 02-11-2018, 11:41 AM

Quote:

Originally Posted by bowtiesonly

https://www.ebay.com/itm/2015-Chevro...JaU6t2&vxp=mtr

That is a wrap.

cnrad · 02-11-2018, 11:46 AM

Quote:

Originally Posted by bowtiesonly

https://www.ebay.com/itm/2015-Chevro...JaU6t2&vxp=mtr

Luckily it's a wrap, so the next owner can get rid of it. It's not that bad though, it's obviously a take on the test mule look. Would have looked better if they stuck with the usual white instead of yellow, but it sure does stand out.

bowtiesonly · 02-11-2018, 11:49 AM

Thought it might be a vinyl wrap but either way it was hard to look at, just thought id share it. To each their own. Just my opinion a little too busy for me.

redcoats1976 · 02-11-2018, 12:20 PM

looks like a bad acid trip...

Royal Tiger · 02-11-2018, 12:20 PM

Quote:

Originally Posted by bowtiesonly

Thought it might be a vinyl wrap but either way it was hard to look at, just thought id share it. To each their own. Just my opinion a little too busy for me.

It’s god awful.

JLSuperfly · 02-11-2018, 12:49 PM

OMG. My eyes!

SynergyGreenSS · 02-11-2018, 01:03 PM

I like it honestly

Annatar · 02-11-2018, 01:12 PM

Quote:

Originally Posted by bowtiesonly

https://www.ebay.com/itm/2015-Chevro...JaU6t2&vxp=mtr

Looks like one of those special wraps when the manufacturer is testing a new model and they are driving a test mule, not wanting to reveal the shape of the new product.

I wouldn't do what the owner did, but I suppose it's a matter of taste. De gustibus non est dispuntandum.

What's far more concerning is how low that car is; I cannot imagine how the wheels can be turned or how that car could hit a pothole without the wheels scraping the wheel wells and / or the fenders. It looks as if the suspension collapsed and the vehicle is in serious need of service.

SynergyGreenSS · 02-11-2018, 01:13 PM

Quote:

Originally Posted by Annatar

Looks like one of those special wraps when the manufacturer is testing a new model and they are driving a test mule, not wanting to reveal the shape of the new product.

I wouldn't do what the owner did, but I suppose it's a matter of taste. De gustibus non est dispuntandum.

What's far more concerning is how low that car is; I cannot imagine how the wheels can be turned or how that car can hit a pothole without the wheels scraping the wheel wells and the fenders. That's just crazy, not to mention that it looks ridiculous.

I think it’s on bags

chevyss69 · 02-11-2018, 01:13 PM

Not feeling it

J Rod · 02-11-2018, 01:37 PM

That’s bad, this is worse.

Royal Tiger · 02-11-2018, 03:54 PM

That supposed to be Batman or Robin?

chuckie669 · 02-11-2018, 04:08 PM

Quote:

Originally Posted by J Rod

That’s bad, this is worse.

What's worse about my car?

02-11-2018, 11:34 AM	#1
bowtiesonly Drives: 2012 Camaro 2ss Join Date: May 2012 Location: Arkansas Posts: 225 View My Garage	How you should never paint your camaro. IMO https://www.ebay.com/itm/2015-Chevro...JaU6t2&vxp=mtr __________________ 2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.

02-11-2018, 11:49 AM	#4
bowtiesonly Drives: 2012 Camaro 2ss Join Date: May 2012 Location: Arkansas Posts: 225 View My Garage	Thought it might be a vinyl wrap but either way it was hard to look at, just thought id share it. To each their own. Just my opinion a little too busy for me. __________________ 2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.

02-11-2018, 01:03 PM	#8
SynergyGreenSS Drives: 2011 2SS Join Date: Mar 2015 Location: Arlington, Texas Posts: 1,333	I like it honestly __________________ 2011 SS L99 LSA Supercharger, BTR Stage 3 PDS Cam, Yank 3200SS, Weapon X Stage 2 intake, LSA Heads, Flex Fuel, Ported throttle body, Speed Engineering Headers, NOWEEDS, ZL1 fuel pump, DSX AUX Pump, ID-1050X injectors, 3” pipe to NPP mufflers, 3.91 gears

02-11-2018, 01:37 PM	#12
J Rod Drives: '14 BRM 1LE 2SS/RS Join Date: Nov 2017 Location: Ft. Wayne, IN Posts: 801	That’s bad, this is worse. __________________ *592 HP/590 TQ* LSA Blower w/ 2.45 Griptec, Reinforced Brick, FIC 1000 injectors, JRE FPCM, LFP Dual Pass HX, ZL1 IC pump, RotoFab CAI, Bo White TB, Coated Stainless Power 1-7/8" LTs, NPP, NGK TR7IX, Mighty Mouse Wild CC, AEM X-Series WB, Aeroforce Interceptor, MGW Shifter, Z28 Grill, Gary's Custom ZL1 Rockers, Hero Tails, Tuned by IMC

02-11-2018, 12:20 PM	#5
redcoats1976 Drives: LT W/2LT,blue metallic Join Date: Jul 2016 Location: central florida Posts: 4,916	looks like a bad acid trip...

02-11-2018, 12:49 PM	#7
JLSuperfly Drives: 2014 Red Hot LS3 Join Date: Oct 2014 Location: SF Bay Area, CA Posts: 4,267	OMG. My eyes!

02-11-2018, 01:13 PM	#11
chevyss69 Drives: 2011 2ss/rs Join Date: Dec 2014 Location: hershey Posts: 162	Not feeling it

02-11-2018, 03:54 PM	#13
Royal Tiger Account Suspended Drives: 2013 2SS/RS Convertible Join Date: Apr 2016 Location: Lehigh Valley, PA Posts: 3,873	That supposed to be Batman or Robin?