Crowley's Car - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Crowley · 06-11-2009, 03:23 PM

Picked it up on June 2nd. I have an appointment on June 29th to take it down to ADM and get the ARH Headers installed and a dyno tune. I should be doing a before and after dyno so I'll post up results.

I do plan on eventually replacing the axelback as soon as some more become available. I'm thinking something withe magnaflows in it will give a nice sound.

Additional plans include an Air Intake .. I'll wait to see what is out there and available. I also plan on doing 20x10 or 20x11s on the back with 315s on them and put 20x9s up front with 265s or 275s on them.

If MGW comes out with a shifter I will plan on putting that in the car.

That might be it for a while unless I get the itch. I'll be saving up for either a Magnacharger, KB, or Whipple in the future at some point in time.

I look forward to seeing what others do to their cars and learning from their experiences.

Crowley

moto-camaro · 06-13-2009, 09:54 PM

planning on any visual mods? or going to keep the stock look

Crowley · 06-16-2009, 08:21 AM

Quote:

Originally Posted by moto-camaro

planning on any visual mods? or going to keep the stock look

Other than wheels, I am not planning for any visual mods. This could change depending on what the aftermarket comes up with

Crowley

2010 2-Tone · 06-16-2009, 08:32 AM

Crowley,
Looking forward to see the gains from the ARH headers. Please post pics and how much room you have after sticking those 315 under the back.

Crowley · 06-25-2009, 09:57 AM

So I have about 650 miles on the car so far. I have opened it up a few times and the car is very deceptive as to how fast it gets to 80mph

Monday (June 29th) is getting closer and closer and I am getting excited about the AHR headers and Tune that will be happening that day. I am also having them weld in an 02 bung for future when I want to get FI and include an Air/Fuel wideband gauge. I am also excited because Andy will hopefully have his 427 car there with the 3 in magnaflow axelback installed. This is what I will be looking to do in the NEAR future after the AHR install (the axelback that is not the 427

)

I also inquired to LMR about their CAI and may try to get one before Monday if possible. I will do a baseline dyno and then a dyno after all the work is done. I'll post all the information I can!

Crowley

Kyle.Gilmour · 06-25-2009, 10:13 AM

niiiiice...

looking forward to see how it all turns out... You should do some cosmetic changes (so i can see how they look on the CGM before mine gets here) hahaha

kidding... but excited to see how it come out.

Crowley · 06-29-2009, 07:28 AM

There were some dyno issues late last week and they expect it to be up and running by Tuesday (6/30). That being said, I have rescheduled to Tuesday.

Crowley

Crowley · 07-02-2009, 09:52 AM

AHR header system and tune install yesterday. I am very happy with the gains. You can read about it here: http://www.camaro5.com/forums/showthread.php?t=30365 .

I will be getting the magnaflow muffer system to get a better sound that I want. Stay posted for a vid soon.

Crowley

*TAG UR IT* · 07-02-2009, 10:54 AM

Nice set up. Did you give it a tune? And, have you gotten a check engine light yet from the header install?

Crowley · 07-02-2009, 10:56 AM

Quote:

Originally Posted by TAG UR IT

Nice set up. Did you give it a tune? And, have you gotten a check engine light yet from the header install?

Yes, I got a tune when they installed the headers. I have not had any issues with Check engine lights ....

Crowley

Kyle.Gilmour · 07-02-2009, 12:31 PM

Quote:

Originally Posted by Kyle.Gilmour

niiiiice...

looking forward to see how it all turns out... You should do some cosmetic changes (so i can see how they look on the CGM before mine gets here) hahaha

kidding... but excited to see how it come out.

never mind me.. I am off my rocker. sorry.

cant wait for the video.. i am debating exhaust from SLP or magnaflow

Crowley · 07-07-2009, 11:26 AM

Update. I have had 2 check engine lights related to the O2 Sensors. I have had this fixed in the tune so I won't get these and ADM is working with the vendor on a solution that won't need the tune to resolve this.

The car is running strong and we have had a couple of cool mornings (70 - 80 degrees) and the car just loves that

Crowley

tones2SS · 07-07-2009, 03:23 PM

Very cool. Looking forward to the video and the pics of 315's under the car.

Crowley · 07-17-2009, 07:38 AM

I think it is time to take the car to the next level. I have been in touch with ADM performance and am thinking about the following install:

TVS 2300
Blower cam and supporting mods
I have a new era air intake on order
KB BAP
Tune for it all

I am going to put wheels on the back burner for right now ..

I'll keep you all posted ..

Crowley

06-11-2009, 03:23 PM	#1
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	Crowley's Car Picked it up on June 2nd. I have an appointment on June 29th to take it down to ADM and get the ARH Headers installed and a dyno tune. I should be doing a before and after dyno so I'll post up results. I do plan on eventually replacing the axelback as soon as some more become available. I'm thinking something withe magnaflows in it will give a nice sound. Additional plans include an Air Intake .. I'll wait to see what is out there and available. I also plan on doing 20x10 or 20x11s on the back with 315s on them and put 20x9s up front with 265s or 275s on them. If MGW comes out with a shifter I will plan on putting that in the car. That might be it for a while unless I get the itch. I'll be saving up for either a Magnacharger, KB, or Whipple in the future at some point in time. I look forward to seeing what others do to their cars and learning from their experiences. Crowley __________________

06-13-2009, 09:54 PM	#2
moto-camaro CEO of the Internet Drives: the Roflcopter Join Date: Mar 2009 Location: Halifax, NS Posts: 1,282 View My Garage	planning on any visual mods? or going to keep the stock look __________________

06-25-2009, 09:57 AM	#5
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	So I have about 650 miles on the car so far. I have opened it up a few times and the car is very deceptive as to how fast it gets to 80mph Monday (June 29th) is getting closer and closer and I am getting excited about the AHR headers and Tune that will be happening that day. I am also having them weld in an 02 bung for future when I want to get FI and include an Air/Fuel wideband gauge. I am also excited because Andy will hopefully have his 427 car there with the 3 in magnaflow axelback installed. This is what I will be looking to do in the NEAR future after the AHR install (the axelback that is not the 427 ) I also inquired to LMR about their CAI and may try to get one before Monday if possible. I will do a baseline dyno and then a dyno after all the work is done. I'll post all the information I can! Crowley __________________

06-25-2009, 10:13 AM	#6
Kyle.Gilmour Charter Circle Member Drives: 427 LSX- with TWINS Join Date: Jan 2007 Location: Back in Michigan!! Do miss ATX and my Tejas friends Posts: 2,745 View My Garage	niiiiice... looking forward to see how it all turns out... You should do some cosmetic changes (so i can see how they look on the CGM before mine gets here) hahaha kidding... but excited to see how it come out. __________________

06-29-2009, 07:28 AM	#7
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	There were some dyno issues late last week and they expect it to be up and running by Tuesday (6/30). That being said, I have rescheduled to Tuesday. Crowley __________________

06-16-2009, 08:32 AM	#4
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Crowley, Looking forward to see the gains from the ARH headers. Please post pics and how much room you have after sticking those 315 under the back.

07-02-2009, 09:52 AM	#8
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	AHR header system and tune install yesterday. I am very happy with the gains. You can read about it here: http://www.camaro5.com/forums/showthread.php?t=30365 . I will be getting the magnaflow muffer system to get a better sound that I want. Stay posted for a vid soon. Crowley __________________

07-02-2009, 10:54 AM	#9
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Nice set up. Did you give it a tune? And, have you gotten a check engine light yet from the header install?

07-07-2009, 11:26 AM	#12
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	Update. I have had 2 check engine lights related to the O2 Sensors. I have had this fixed in the tune so I won't get these and ADM is working with the vendor on a solution that won't need the tune to resolve this. The car is running strong and we have had a couple of cool mornings (70 - 80 degrees) and the car just loves that Crowley __________________

07-07-2009, 03:23 PM	#13
tones2SS Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009 Location: Massachusetts Posts: 3,100	Very cool. Looking forward to the video and the pics of 315's under the car.

07-17-2009, 07:38 AM	#14
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	I think it is time to take the car to the next level. I have been in touch with ADM performance and am thinking about the following install: TVS 2300 Blower cam and supporting mods I have a new era air intake on order KB BAP Tune for it all I am going to put wheels on the back burner for right now .. I'll keep you all posted .. Crowley __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	125	02-05-2024 09:55 PM
What's considered a Muscle Car?	SyN	General Automotive + Other Cars Discussion	125	09-25-2010 12:04 AM
The Journey	greenrail	5th Gen Camaro SS LS LT General Discussions	16	05-29-2009 07:43 AM
NEW!! Voice Your MARKETING Suggestions/Input for Focus Group on 2010 Camaro.	Mr. Wyndham	5th Gen Camaro SS LS LT General Discussions	114	05-08-2008 09:24 PM