Pyr0b0y's SS Build Thread [COTW 5/23/11] - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*Mindz* · 03-25-2011, 06:13 PM

you're brave, I didn't go about 2k...

pyr0b0y · 03-25-2011, 06:17 PM

Luke said the timing need to be changed and i'm running the BAP on the rich side; took a ride after everything was installed and we didnt have any detonation.

aet08 · 03-25-2011, 06:20 PM

looks good

Silver2SSRS6spd · 03-26-2011, 10:25 AM

Quote:

Originally Posted by Mindz

you're brave, I didn't go about 2k...

+1 I would keep it 2 and under until you get her tuned. Can't wait to see you BAP setup.

pyr0b0y · 03-28-2011, 11:10 AM

went to the good guys car show yesterday and have a great time! Autometer was sponsoring the event and I picked up my Boost gauge from them. Met someone who owns a dyno shop thats about 20 mins from where i live. I'll be stopping by Wednesday after work to get my car dynoed so I can finally step on the gas.

Gunna try and get my footwell lighting installed tonight. Also got some pics of my ride friday night so I'll get those posted tonight too.

pyr0b0y · 03-28-2011, 11:21 AM

Just checked out Blu808's site....my car's in one of the photos!!

http://www.blu808.com/About-Us_ep_7.html

Silver2SSRS6spd · 03-28-2011, 01:29 PM

Their shop looks nice an big. Did you find out what the 808 means or stands for?

pyr0b0y · 03-28-2011, 01:40 PM

Quote:

Originally Posted by Silver2SSRS6spd

Their shop looks nice an big. Did you find out what the 808 means or stands for?

planning on heading down there after work so ill let u no

ddavis · 03-28-2011, 02:41 PM

cool build man, good to meet ya the other night for a quick sec. Slick ride

pyr0b0y · 03-28-2011, 05:56 PM

thanks dude. just checked out ur build thread. ur rims are

AMAZING!

pyr0b0y · 03-30-2011, 06:43 PM

Just got off work and will be heading over to GDP to get my car dynoed. I'll post the numbers tonight and scan up the actual sheet tomorrow at work. hoping for 600+hp *keeping my fingers crossed*

Silver2SSRS6spd · 03-30-2011, 07:25 PM

Quote:

Originally Posted by pyr0b0y

Just got off work and will be heading over to GDP to get my car dynoed. I'll post the numbers tonight and scan up the actual sheet tomorrow at work. hoping for 600+hp *keeping my fingers crossed*

pyr0b0y · 03-30-2011, 09:21 PM

@ GDP getting my car dynoed. currently running 587hp/592tq and still more tuning. I'm pick up A TON of torque.....youtube vid is getting published right now and will get posted up in a couple mins.

*Mindz* · 03-31-2011, 12:07 AM

Looks like you got scared of your own car at 0:24...

Sounds AMAZING. If only it wasn't loud enough to get pulled over. =(

View Poll Results: T Tops or Carbon Fiber?
T Tops	14	73.68%
Carbon Fiber Conversion (Fenders, doors, etc)	5	26.32%
Voters: 19. You may not vote on this poll

03-25-2011, 06:13 PM	#127
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	you're brave, I didn't go about 2k... __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

03-25-2011, 06:17 PM	#128
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Luke said the timing need to be changed and i'm running the BAP on the rich side; took a ride after everything was installed and we didnt have any detonation. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-28-2011, 11:10 AM	#131
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	went to the good guys car show yesterday and have a great time! Autometer was sponsoring the event and I picked up my Boost gauge from them. Met someone who owns a dyno shop thats about 20 mins from where i live. I'll be stopping by Wednesday after work to get my car dynoed so I can finally step on the gas. Gunna try and get my footwell lighting installed tonight. Also got some pics of my ride friday night so I'll get those posted tonight too. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-28-2011, 11:21 AM	#132
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Just checked out Blu808's site....my car's in one of the photos!! http://www.blu808.com/About-Us_ep_7.html Attached Images __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-25-2011, 06:20 PM	#129
aet08 Drives: c Join Date: Feb 2010 Location: c Posts: 627	looks good

03-28-2011, 01:29 PM	#133
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	Their shop looks nice an big. Did you find out what the 808 means or stands for? __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

03-28-2011, 02:41 PM	#135
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	cool build man, good to meet ya the other night for a quick sec. Slick ride __________________ Powered by Maggie553rwhp 541rwtq

03-28-2011, 05:56 PM	#136
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	thanks dude. just checked out ur build thread. ur rims are AMAZING! __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 03-30-2011 at 06:42 PM.

03-30-2011, 06:43 PM	#137
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Just got off work and will be heading over to GDP to get my car dynoed. I'll post the numbers tonight and scan up the actual sheet tomorrow at work. hoping for 600+hp keeping my fingers crossed __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-30-2011, 09:21 PM	#139
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	@ GDP getting my car dynoed. currently running 587hp/592tq and still more tuning. I'm pick up A TON of torque.....youtube vid is getting published right now and will get posted up in a couple mins. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 03-30-2011 at 10:21 PM.

03-31-2011, 12:07 AM	#140
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	Looks like you got scared of your own car at 0:24... Sounds AMAZING. If only it wasn't loud enough to get pulled over. =( __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12]	GTAHVIT	Member Car Journals	5217	06-27-2016 08:14 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Anyone in St. Louis want a black SS March build Camaro	Sean_W	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	03-08-2009 01:31 PM